Navigation for cq vd7001u?

Maybe the audio amplifier IC got burned

if u got the remote, hold down the right side of the circle on the remote for no more than 10 seconds nd the code should appear..

Click here to download the user's guide/instructions manual.

My friend have in car panasonic Cq-vx 100u them forgot the code. now Ineed a defaul code please sir.

send me you email and I will send you the install Manuel

KS AUDIO
Kim ( Owner )
[email protected]
www.ksaudio99.webs.com

in the car u will need 1 backup power wire and 1 accessory power and a ground wire connections

what i have done when i had one was i held the joystick on the player for about 3-5 seconds and then pressed the mode/power on the remote and it reset the player and entered in 0000 for the code and it works. just my personal experience.

You need the remote control that goes with this DVD player to make it work it has two security devices. One you remote, you must push the power button on the remote the first time you use it. Two the security code, it is a four digit code that must be entered anytime that the device is installed into a different car. If it's code is not setup yet the code is 0000, otherwise you need to get the code from the person that installed it. There is no way to bypass the these two steps.

Yes everything has to be wired correctly for this device to work.

I dont think panasonic release one for that unit