Question about Bushnell Pinseeker 1500 Rangefinder

1 Answer

1888 YM in display

How do I reset

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Your rangefinder has a program or CPU board failure. That sometimes happen when a battery was allowed to die in the unit. There is not way to reset. Sorry. I would have the board replaced and the unit reprogrammed. Around 130 dollar bill to fix.

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES IMAGE SHOW (FLAG) LEFT SIDE AND FOLLOWING BOTTOM OF VIEWER: 1 888 YM +18 D 888 BATTERY CHECKS OK SAME IMAGE APPEARS WHEN TOP BUTTON IS DEPRESSED.


Mine showed the same, found to be the mode button stuck in, removed button and used cotton bud with alcohol rub into the rubber seal, gave it a good clean and now as good as new. Hope this helps.

Nov 05, 2015 | Bushnell Tour V2 Pinseeker Laser...

1 Answer

Device did not show yardage to hole


Maybe the yardage indication is predicated on the screen size - on many units if you are way out in range, you get nada until you zoom in. Check that angle out.

Sep 11, 2015 | SkyCaddie SkyGolf Sky Caddie SGX

1 Answer

Is there a reset option for the Yardage Pro 1000. it displays the target rectical but does not aquire a target or give a range when I depress the fire button the word laser appears the displayed find...


The laser lense or receiver may need to be cleaned try a larger target at closer range.... they don't like dark colors... blk bear is really hard to target and u usually have to select a target close to bear... same as dark colored deer.... the laser gets absorbed instead of reflected

Dec 02, 2014 | Rangefinders

1 Answer

Change from meters to yards on bushnell chuck adams rangefinder


First, remove the battery then replace it to reset the unit, then ...
Taken word for word from the manual: While looking through the eyepiece, press and hold the POWER button down for approx. 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress(hold down) the power button, the display will toggle back and forth between Yards and Meters. Once the unit of measure desired is displayed, simply release the power button. The device will return to the last unit of measure setting used each time the unit is turned on.

Sep 12, 2012 | Bushnell Rangefinders

1 Answer

Will not give me yardage readout ??? Bullseye blinks but does not display yardage


http://www.bushnell.com/manuals/rangefinders/20-5102_Pinseeker.pdf here is the manual it will show you how to reset and also trouble shoot the issue there is an explantion to your problem on thre to on page 8 let me know if this worked please

Mar 17, 2011 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

When I aim at a given object it reads 1888, and cuts off.


I would advise calling bushnell customer service and send your unit in for repair. they can be reached by calling 800-423-3537 option 1. this unit will need to be sent in for repair.

Oct 06, 2009 | Bushnell Yardage Pro 500 Rangefinder

1 Answer

Bushnell 400 rangefinder won't show yardage stuck on 888


If the unit is stuck on 1888 the circuit board inside has lost its programming. Sounds like its about 10+ years old. Bushnell doesn't work on them anymore. If you use it for hunting I would suggest the Scout 1000 with ARC compensation, if you use it for golf look at the Medalist. You can see them both at bushnell.com

The hunting rangefinder will run about 250 bucks
The golf rangefinder will run about 220 bucks.

Both use advanced target locking systems.

mtg

Jun 01, 2009 | Bushnell Yardage Pro 500 Rangefinder

1 Answer

Won't range even after reset


Well after going through the reset procedure (holding both buttons down for 30 seconds) the unit didn't appear to be working. Being somewhat new to the proper use of this device it appears that it might be sensitive to low light conditions or certain objects. After playing with it more I'm now able to get it to work but there are still certain conditions where it won't give me a reading.

Feb 12, 2009 | Nikon ProStaff Laser 440 Rangefinder

1 Answer

1888 YM in dispay


No.....your unit needs a cpu board and reprogramming.....130 dollar bill

Feb 07, 2009 | Bushnell Pinseeker 1500 Rangefinder

2 Answers

Pinseeker 1500 just illustrates 1888 YM


Here's where you can get the manual:

http://www.bushnell.com/customer_service/manuals/rangefinders/20-5103_Pinseeker.pdf

I'm having the same problem, but the normal yardage seems to be working fine. I tried calling Bushnell, they said I would have to send it in to them and they would fix it. I'm thinking it's got to be something easy to fix.

Does anyone have any answers?

Oct 18, 2007 | Bushnell PinSeeker 1500 20-5103...

Not finding what you are looking for?
Bushnell Pinseeker 1500 Rangefinder Logo

Related Topics:

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Rangefinders Experts

kakima

Level 3 Expert

96683 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Bushnell Rangefinder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...