Question about Compaq Presario Notebook
Que:-1 I want to use DMA Transfer mode instead of PIO Mode in my system. The problem is that my system is not taking Primary IDE Channel in which current trasfer mode is in Ultra DMA Mode 5. While system is taking Secondary IDE Channel in which current transfer mode is in PIO Mode. Few months ago it was working in Primary IDE channel and Transfer Mode was Ultra DMA Mode 5, But I Don't Know how and when it Switches to Secondary IDE Channel with PIO Mode.
Now Please tell me how can i bring my system back in Primary IDE channel with Ultra DMA Mode 5.
Operating System:- Microsoft window xp Proeessional.
Service Pack - 2.0
BIOS Version : F.15
Device Type:- IDE ATA/ ATAPI Controllers.
Try this. go to BIOS, from your main page choice sata1 and press enter then press DMA MODE and chanege to UDMA5 press enter F10 save and exit
Posted on Feb 07, 2009
SOURCE: Still needed solution of problem
This condition is caused by spyware,hard drive problems. First create a restore point, then run this script http://winhlp.com/tools/resetdma.vbs reboot and should do the trick. After XP tried to access the hard drive without success for any reason there is a register counter that downgrades the speed of the hard drive to PIO. Good Luck!
Posted on Feb 09, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 14, 2011 | Memorex Products - External DVD Recorder,...
on Sep 21, 2010 | Computers & Internet
Oct 24, 2010 | ASUS Black 156" K50IJJ1 Laptop PC with...
Sep 23, 2009 | Acer Aspire 3000 Notebook
Sep 23, 2009 | Microsoft Windows XP Home Edition
Aug 06, 2009 | Acer Aspire 9410-4317 Notebook
Feb 09, 2009 | Compaq Presario Notebook
Mar 12, 2008 | Computers & Internet
To enable DMA mode using the Device Manager
Open Device Manager.
Double-click IDE ATA/ATAPI Controllers to display the list of controllers and channels.
Right-click the icon for the channel to which the device is connected, select Properties, and then click the Advanced Settings tab.
In the Current Transfer Mode drop-down box, select DMA if Available if the current setting is "PIO Only."
If the drop-down box already shows "DMA if Available" but the current transfer mode is PIO, then the user must toggle the settings. That is:
Change the selection from "DMA if available" to PIO only, and click OK.•
Then repeat the steps above to change the selection to DMA if Available.
Oct 14, 2007 | Computers & Internet
181 people viewed this question
Usually answered in minutes!