Question about Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Bumatic dishwasher bdw13 showing error code 1

The dishwasher has come up with error code 1 dont no what it means and how to re-set the pannel as cant find the manual

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Ok I think I can really help you here.

This is your error code, sounds like it has problems filling, might also be blocked.

‘E1’ LONGER FILL TIME. FAUCET IS NOT OPENED.
Ensure that inlet hose is not
kinked or crushed
.

Found the online manual for this model, it is a PDF file so you will need 'Adobe Reader' to read it. (click on link)
http://www.tlc-direct.co.uk/Technical/DataSheets/Baumatic_Manuals/BMBDW13.pdf

That should help you
Bri

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dishwasher will not start and the plates light keeps flashing, what does this mean and what can I do to fix this. Thanks


Here is a link to the error codes for your washer. http://www.manualslib.com/manual/213875/Baumatic-Bdw13.html?page=25
Also, another link to an incredible source of info on a whole host of manufacturers' diagnostic routines--your model is on page 19, includes how to enter diagnostic mode, etc. I hope this helps you!

Oct 04, 2015 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Dishwasher wont stop working


You will have to check if the dishwasher pump is constantly running . If the only way you can stop is by turning off the power supply, the float switch has tripped. This means ther is either water collected at the base of the dishwasher due to a leak or the float switch is faulty. ther may be an error code on the panel if this is the case.

Jul 18, 2012 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Dishwasher showing e3 error


E3 error arises due to the malfunction of temp sensor or the heating element. Check for the thermostat.

Jul 02, 2012 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Error code E2


Error Code E2 means the pump is blocked. The remedy is to take the filter out which is underneath the bottom dish basket and ensure its is clean and free from debris. Then use a small container to empty the water sitting in the bottom of the machine/filter housing and ensure that no waste is stuck in the bottom. That should clear it

May 24, 2009 | Baumatic 23 in. BDW13 Built-in Dishwasher

2 Answers

Error code on my bdw13 dishwasher


Turn off the water and electric!
Its really easy to change the heater element, once you have taken out the dishwasher!, remove the bottom panel and remove the wiring to the element, slacken off the nut under the electrical contacts voila!, also it may be a faulty thermostat that you cannot reset and has to be replaced, I would do this at the same time, as again its easy with the bottom off.

May 03, 2009 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Dont know how to clean the dishwasher


go to the dishwashers brand site,click help for your solution.

Jan 05, 2009 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Baumatic BDW13


e4 code means the machine is showing a fault code for overfill,tip the machinee to a 45 degree angle and get excess water out should run ok after that

Aug 13, 2008 | Baumatic 23 in. BDW13 Built-in Dishwasher

4 Answers

I need to reset my dishwasher but don't know how!!


If it's any help then here is the link to the user manual (when you download it it applies to bdw13 as well even though it is labelled for the bdw14) http://www.baumatic.co.uk/products/discontinued-models/dishwashers/integrateddishwashers/BDW14 Best I could come up with is to try page 19 at the bottom of the "dishwasher doesn't run" section - there are two different types of reset which may do the job. Hope this helps :)

Mar 13, 2007 | Baumatic 23 in. BDW13 Built-in Dishwasher

Not finding what you are looking for?
Baumatic 23 in. BDW13 Built-in Dishwasher Logo

959 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Dishwashers Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Kolbrun...

Level 3 Expert

1187 Answers

Are you a Baumatic Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...