Question about Brother LS-2125 Mechanical Sewing Machine

1 Answer

Needle getes broken

In my brother sewing machine - the needles get broken very fast

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 69 Answers

Check to see if your needle plate is gouged or signs that the needle is hitting the plate. If so, you may be pulling a little too hard when the fabric is feeding. Sometimes when you pull too hard, it pulls the needle back and it will hit the plate instead of going into the needle hole and you will break needles. Try just letting the fabric feed itself and you simply guide it to make sure it stays in a straight line.

Posted on Feb 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to chang ethe needle

there should be a little hand screw near the top of the needle, loosen it enough to slide the broken needle out, replace with a new needle and tighten, Just remember, if you don't have the needle in properly you will ave issues. Usually, the flat part of the needle goes to the right, I have a brother sewing machine and the flat part on mune goes to the back though. Just take note when you remove the old needle as to the position. Also, a little known fact, a sewing machine needle should be replaced after 8 hours of use.

Jan 16, 2014 | Sewing Machines

1 Answer

Brother xl-6562

Check the clamp for a crack it sounds like it may have been broken. Good luck

Jul 21, 2012 | Brother XL-6562 Mechanical Sewing Machine

1 Answer

The needle broke whilst sewing using my Brother machine and now the machine will not work it appears to have jammed ?

check to make sure that all the broke needle has been removed
make sure there is no part of the broken needle in the bobbin area
try putting in a new needle & see if the machine will sew
make sure the bobbin is not damaged
it's very possible since the needle broke the machine could have
jumped time
I suggest to have the machine checked to see if the broken needle
caused any damage to the machine

Jun 09, 2012 | Brother Sewing Machines

1 Answer

Brother sewing machine model 732 (pretty old machine) compal star My machine was sewing forward up to today. I broke a needle changed that since when it wants to go backwards...any ideas what to do I have...

have you checked the reverse lever to see what position it's in?

if the needle broke at the tip end check in the bobbin area for needle fragments

it is possible that a broken needle can jam up or even get the machine out of time.
it may need to be serviced

Aug 03, 2011 | Brother Sewing Machines

1 Answer

Brother XL 3027 sewing machine the needle hit the hook in the incorrect spot causing needle to bend and will not sew.

That's ok, needles get bent all the time and sometimes broken too. Just give it a new needle (look on the shaft at the top of the needle, you should see a screw to loosen for removing the needle). Note that the needle is made with a flat side on the shank to locate it properly, watch how the bent one is positioned when you remove it.


Dec 27, 2010 | Brother Sewing Machines

1 Answer

I have knocked off the metal portion of the needle threader. Machine is brand new! What can I do to replace this part.

If it is not broken, just slide it back on and line up with the eye of the needle. If, broken, call Brother, at 1-877-276-8437. Don't worry I have one of these machines too, they are tougher than they look. I have 6 sewing machines and each one has their own quirks.

Sep 25, 2010 | Brother CS6000i Computerized Sewing...

3 Answers

Where can I find new needles? (LS-2125 Machine) All my needles broke and I can't seem to find out where to get replacement ones before Halloween! Can I use any machine needles or do they have to be...

If in the uk, any high street sewing shop that sells brother machines will help you, otherwise, check the local yellow pages for sewing machine suppliers and spares.

Oct 25, 2009 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

Brother machine thread coming out of needle

Wet and dry fine paper rub the walker foot and base for any catching.

Oct 16, 2017 | Euro-Pro Fast and Easy 420 Mechanical...

1 Answer

Broken needle!!

look for the nut into the handle of needle, it is an rough nut then loosen it and pull the needle inside

Sep 30, 2008 | Brother LS-2125 Mechanical Sewing Machine

Not finding what you are looking for?
Brother LS-2125 Mechanical Sewing Machine Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18410 Answers

Irene Tulloch

Level 2 Expert

460 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides