Question about Printers & Copiers

1 Answer

My canon pixma ip1000 prints,but no image/letters/colors ...blank

I usually used replacement inks, until I used much cheaper from china. First, black , print a little, then colors, then it prints, but no images/letters, I tried cleaning the print head with isopropyl alcohol , no result , then with lukewarm water, then with chlorox . Still, it is printing but paper is blank. I bought a replacement cartridge made in korea, the same I used before the ink made from china, soaked the printhead for two hours in isopropyl alcohol for two hours , dried for an hour, then put the new cartridges, then perform deep cleaning procedures . Still, no printing , I mean it prints, but no images/letters/colors... blank. Can You suggest another way ? Please help me, Thank You.

Posted by on

  • Anonymous Apr 30, 2009

    printer is canon pixma iP 1000. Initially print was not good after
    washing the head it does nit print at all. though ink cartiges show
    full.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Buy new HP printer you will have no problem with nozzels

Posted on Nov 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon Pixma ip6000d isn't printing any images or text. There is plenty of black ink, I ran the tests for alignment and nozzle check. The paper feeds through fine and it sounds and acts as tho


Did you try a test print. Most printers have a option to set the ink color, this is done when your computer asks you if you want to print. Look for an options tab and search for ink color options pick black only and try a test print. The test print is done on printer set up. If all else fails try the manual it usually has a troubleshoot section. Oh yes make sure you have the correct usb port some are configured at a lower level ( mine has 2 different ones a 2.0 and a 3.0 the 3.0 is blue when you look inside of it) my 2.0 port wouldn't set up my printer I had to use the 3.0 port. Hope it helps you some!

Feb 15, 2013 | Canon Pixma iP6000D InkJet Photo Printer

3 Answers

Canon IP4300 - the two black ink cartridges


No!

The large cartridge is used for text only printing.
The smaller black cartridge is used for black in images such as pictures.

You have a "C (cyan) M (magenta) Y (yellow) and B (black) color system. This actually saves the color inks for you. If the Black was not there, you would need to make a composite black from the color inks.

Don

Jan 31, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

I am having problem with my printer canon pixma iP1000. It cannot print on blank even its ink is new but the colored ink prints. Please help me


reset your printer, turn it off. remove power cable from the main supply. leave it for 10 minutes. Restart again.

Oct 22, 2009 | Printers & Copiers

1 Answer

In ip1000 printer black ink is not working.already replaced a black tank but it doesn't make any result.why???


Hi vdkmail,
Perform nozzle check pattern from maintenance menu in printer driver properties first. Is all black nozzle printed?. Is it perfect or partially printed?. Or no black nozzle printed at all. Then perform printhead cleaning procedure to fix this. If problem still persist means the printhead should be replaced with new one. But be careful, print blank (no nozzle printed at all) might be caused by faulty purge unit too so that ink not flows down from ink tank.
Regards,

Source:
Canon Inkjet Forum

Dec 11, 2008 | Canon PIXMA iP1600 Printer

2 Answers

Problem with canon PIXMA ip1000 printer


Hi there,

It might be the contact strip of the Printer which remains in touch with Cartridge going rip off for the Black one.

You need to repair it. It will not cost you much.

Let me know if I can assist you further.

Regards
Ellin

Sep 25, 2008 | Canon PIXMA iP4000 InkJet Photo Printer

2 Answers

IP1000 cannot print black ink


This is what worked (so far) with my Dell1.gif AIO A940 printer1.gif that wouldn't print black ink.

It worked for awhile when I chose photo/glossy paper, but then it quit printing again (see below).

PRINT, PROPERTIES, PAPER SETUP, SPECIALTY PAPER, PHOTO/GLOSSY


I got it to print, again, by putting SEVERAL papers in the feeder (instead of just 1) - there is a sensor that is supposed to automatically detect paper type, and it might not be working right, especially with one or only a couple of sheets.

Jan 23, 2008 | Canon PIXMA iP4000 InkJet Photo Printer

5 Answers

Canaon pixma ip1000


i need driver for pixma ip1000

Sep 22, 2007 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96738 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...