Question about Altec Lansing Multimedia Computer Speakers

1 Answer

Base Spearker not working

Just bought Altec Lansing BX1121 Speakers and the base is not working. Smaller speakers are great.

Posted by on

  • willbdunn Feb 07, 2009

    No solution as of 2/07/09 Are you saying that I have to pay for a solution? I will take the speakers back to the store. Thanks for nothing.

  • Anonymous Mar 19, 2009

    Base speaker will not work. Does anyone have a solution. It is the BX1121 model.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got mine today (not new) and took it apart and saw two wires that SHOULD go to the bass speaker completely off. It seems to me that there was a line of units that the wires were too short and the workers just pulled them out. I would take it back if i were y'all (if it wasn't from a thrift store like mine :) )

Posted on Apr 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Altec lansing multimedia speaker model ATP3 woffer is giving tearing sound at high base and it seems the woofer is not working at all


Your woofer is bad, probraly blew the megnatic coils, and if mention that it's giving you a tearing sound, then the woofer cone is tear somewhere and is not get the reflex to produce the sound.

Jan 28, 2011 | Altec Lansing Multimedia Computer Speakers

1 Answer

How do I get my altec lansing bx1121 speakers to work on my computer?


just plug it in the computers 3.5mm jack and switch on the speakers from behind the right hand speaker and volume control is above that speaker. there must be manual you can just read it and try.

there may be a possibility that your sound driver is not installed so check that first.

Jan 04, 2011 | Altec Lansing Multimedia Computer Speakers

2 Answers

ALTEC Lansing BX1121 manual


I'm not sure if you put the right model but I found the info for the model BXR1121 on the following link: http://www.retrevo.com/support/Altec-Lansing-BXR1121-Speaker-Systems-manual/id/21327bh832/t/2/

I hope it helps.

Sep 20, 2010 | Audio Players & Recorders

1 Answer

Altec lansing vs2121 model speakers blown


I have the speakers ( in perfect condition) but can not find the base unit. Do you want to sell your base unit ? Or do you want to buy the speakers ?

stevem727@gmail.com

Mar 11, 2010 | Altec Lansing VS2121 Computer Speakers

1 Answer

Need drivers for bx1121 altec lansing speakers


Go to support.dell.com and type in your service tag where it says "Drivers and Downloads." From there you should be able to find the driver that your computer is somehow missing...

Apr 24, 2009 | Audio Players & Recorders

1 Answer

NO Sound from NEW speaker unit?


Yes the green wire that goes from the speaker should be plugged into the green jack on the PC. An easy test to see if its the computer or the speakers is to have the speakers on and volume up a little and tap the tip of the green plug with your fingers while out of the computer. If it makes a humming or any noise at all while tapping, the speakers are working if not lets check voltage at the power plug or if the unit has any lights on. Gook luck!

Mar 25, 2009 | Altec Lansing Multimedia Computer Speakers

1 Answer

Altec lansing avs 200


These speakers are factory molded, technically the only to open them is by breaking the casing......fear not, I will offer an easier soultion which should not damage the case.
Using a heavy screwdriver handle sharply strike the seam on the base of the speaker, after seneral raps along the seam the case should begin to separate....after repairs use the old standbye superglue, Shouldnt be much evidence !
Ed Meyer
AACS
alwaysaffordablesolutions.com

Jun 10, 2008 | Altec Lansing Multimedia Computer Speakers

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...