- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I can't find the Timex T229B on the Timex support site. However, the T228B may be similar. To turn off the alarm completely, there is a switch on the left side that must be set to Off. The switch is labeled Alarm on one side and Radio on the other. In between are 4 positions - from front to back, Radio, Buzz, Off and On. When in the Off position the alarm indicator symbol will not be lit at the top left of the display (it looks a bit like a bell). The dimmer switch is in front of this Alarm/Radio switch on this side of the clock.
To turn off the alarm and reset it for the next day, press the Alarm Set/Reset button to the right of the hour and minute buttons. The Snooze button is the large button to the left of the hour and minute buttons.
there are 3 buttons just above the above the LCD clock - Alarm Set, Radio, and Buzzer. When you press the Radio button you will see the word "radio" appear/disappear just below the time with each press of the button. You want to press this button to make the word "Radio" disappear. The same is true for the Buzzer button. Press the Buzzer button so that the word "Buzzer" does NOT appear below the time. If you do not see the word Buzzer or Radio below the time, then the Radio Alarm and the Buzzer Alarm are both OFF and will not sound.
Just push the button marked radio, sound or buzzer on the front right side of the face or panel - when you see radio, sound or buzzer light up on the screen alarm is on (to whichever you set it - radio sound or buzzer- if you push the button again it will go off. Took me a while to figure that one out too!
When you set the alarm you pressed aburron that said 'radio' and/or 'buzzer' then programmed the time. Just press the buttons again and the alarm will no longer sound. Looking at the dial at the top of the lcd screen you will see the word buzzser or radfio if the alarm is enabled. Pressing buzzer or radio on the side will remove the word and no more alarm!!
I lost my manual also so had to resort to relentless trial
The problem with the alarm is that it is too easy to turn it
The 1 and 2 buttons on top of the
unit with the alarm clock symbol turn each alarm on or off.Your only cue is on the display in the top
line of the display which will have a bell followed by “RADIO” or “SOUNDS”, if the alarm is armed.If you see this symbol and want to disarm the
alarm, press the 1 or 2 alarm button according to which alarm was on the
display.It’s just as easy to turn the
alarm back on either deliberately or accidently
Enter Alarm Setting mode by holding the 1 or 2 alarm button
for about 2 seconds.
Display will flash – in this mode you will be able to do the
Date Set Button – changes between
Arrow Buttons – adjust the time
Alarm 1 (Radio):
Mode Button – changes between
1-6 Buttons-- changes between stations
Alarm 2 (Sounds):
Mode Button – changes between SD1/SD2/SD3/SD4/Buzzer
If you don’t change any settings
for about 5 seconds the unit exits the alarm setting mode.
Timex already has your money so I guess they are not motivated
to publish their manual.