Hello, just picked up this printer was working fine and then machine just started to print blank pages...no error codes. Is it the fuser? Drum? Developer? I have all service manuals and repair manuals, can't quite pin point which is the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
first check your toner cartridge. some time your toner cartridge is damage then black print out is coming.
then check your machine printer and faxes ,check print pages status.sometime their have early print outs.
didnt solve your problem you have to replace main board
you must clean separation roller whit wet cloth or alcohol.
Remove Tray 2, look for blue (usualy) cylinder feed rubber on it and clean
P.S You can clear paper feed roolers too (look at printer bottom after removing Tray 2) using same way!
I just sprayed windex on bottom of cartridge several times and wiped with paper towel until dark streak of black appeared. Then I dried off cartridge and replaced. It works now. Must have been clogged.
please press menu then start black copy (blue button) then fortimes arrow-up (tel.index). machine will switch to maintenance mode and all buttons will flash. press 8 then zero then severaltimes start black copy until error A1 will appear on the lcd. repeat pressing menu nine times and write down the error codes. Plz post them here again. To leave the mode press stop then 9 then 9.