Question about HP Office Equipment & Supplies

4 Answers

Just in process of installing printer and on the Wireless Network Setup page am being asked for Network Security Key. ?Where do i find this

Posted by on

  • daveweds Feb 06, 2009

    Yes. Has seemed to have resolved the problem.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

You have to call the wireless company you are with and they will give you a set of numbers to put in.its just so others cant use your wireless...call the people you use for your wireless and have them give you the key

Posted on Feb 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Ya it is in the router settigns
connect your wifi router to your computer with lan cable .or if already any laptop wifi connection your wifi network when ulick on network it need key it is network security key.
or
connect your wifi router to your computer lan port with lan ethernet cable.
then try this link
http://192.168.0.1
or http://192.168.1.1

type in user "admin"and passowrd is "admin" or blank
then go to security then u see encryption key read it it is your key which u need.

Posted on Feb 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Welcome to Fixya! The Tech support for the Network that you are Using will need to Supply you with this Password to Proceed with the Installation. Please Rate My Response! Thanks!

Posted on Feb 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 848 Answers

Hi
Network key you might have set up early for your wireless network ...you need to insert it .....

Posted on Feb 06, 2009

  • gopinath pasupathy Feb 06, 2009

    thanks for accepting the solution....

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a new wireless password. My printer has a solid green light. I can't get it to print. How do I put my new password in?


From page five of the printer owner's manual:

(You may need to connect the printer with the USB cable during this process)

Changing wireless settings after installation To change wireless settings on the printer, such as the configured network, the security key, or other settings: Using Windows 1 Do one of the following: • In Windows Vista, click . • In Windows XP, click Start. 2 Click Programs or All Programs, and then select the printer program folder from the list. 5 3 Click Tools Œ Lexmark Wireless Setup Utility. Note: If the cable is not already connected, you may be prompted to connect the printer to the computer again using the installation cable as part of the setup process. 4 Follow the prompts on the computer screen to reinstall the software, and then make the changes that you want. Using Macintosh 1 From the Finder desktop, double-click the printer folder. 2 Double-click Lexmark Wireless Setup Assistant. 3 Follow the instructions on the computer screen

You can find the full owner's manual here:
http://www.lexmark.com/publications/pdfs/2007/2420/13L0828.pdf

Oct 05, 2015 | Lexmark Z2420 Printer

1 Answer

What does Enter key for tkip mean and where do I find it. Im trying to set up my new printer. Please help


tkip is a security mechanism for a wireless network. You are trying to connect the printer to a wireless network and it wants the security key for the network. You need to ask the person who setup the network for the key.

May 03, 2011 | Office Equipment & Supplies

3 Answers

Hot to secure my router from my neighbors using them. thanks


click this link to open the router login http://192.168.1.1/

When asked for username use admin and password leave it empty
then goto

SETUP -> WIRELESS SETUP -> MANUAL WIRELESS CONNECTION SETUP -> WIRELESS SECURITY MODE and select "Enable WPA > WPA -> WPA Key -> create your own password and save now if you want to access the Wireless connection you will have to enter the WPA key you just created.

Apr 11, 2011 | D-Link DIR-600 Router

3 Answers

Where is my network security key


My friend,

You have to lo-gin into the router setup page .

1.Put this address (192.168.1.1) in the address bar and then you will see the router setup page.
2.Then this will ask you for the username and password.
3.Username is nothing so leave this blank and password is admin.
4.Then you will see the router setup page .
5.Click on the wireless Tab under the basic wireless settings you will see wireless security .
6.Click on the wireless security and you will see there your router wireless security key.
7.Always select Security Mode as WPA2 PERSONAL.
8.If you want to change the security key you can.
9.After changing the settings Click on the sav settings.

Regards:-
Amit Awasthi

Dec 09, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Just installing for wireless but does not pick up network ,wireless light is on. Thanks


Try this :
Press the setup button on the printer;
Goto network setup
Run the wireless setup wizard
It will ask for the WEP or WPA key (Wireless security key)
If you don't have it contact the router company other can check from the EWS page ; put the default gateway(ip address ) in the address bar fo IE and check for the wireless settings; Even if you dont get it check the Below given Link for The network diagnostic utility ; Download it on your desktop and run it ; it will give the WEP/WPA key

Network Diagnostic Utility:
ftp://ftp.hp.com/pub/printers/ndu/
Click on HPHNDU..
Save it to your desktop
Check the WEP/WPA key
Put it in the printer
Select done it will get connected to the network

for further help can check the link given below:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01491627&cc=us&lc=en&dlc=en&product=3560280

Oct 25, 2009 | HP Photosmart C6380 All-In-One InkJet...

1 Answer

Hp c7200 can't connect to wireless network


Try this :
Press the setup button on the printer;
Goto network setup
Run the wireless setup wizard
It will ask for the WEP or WPA key (Wireless security key)
If you don't have it contact the router company other can check from the EWS page ; put the default gateway(ip address ) in the address bar fo IE and check for the wireless settings; Even if you dont get it check the Below given Link for The network diagnostic utility ; Download it on your desktop and run it ; it will give the WEP/WPA key
Put it in the printer select Done
It will get connected to the network;
Check the Link: (for wireless installation)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01084503&cc=us&lc=en&dlc=en&product=3204785
Regards Soumajit

Sep 15, 2009 | HP Office Equipment & Supplies

1 Answer

Hi, i have an hp officejet 7310. I had been using


first of all press the setup button on ur printer now go to network and then print network config page (or viev network settings ) it will print a page now go ahed and note down the ip address (now if the ip address is 0 then run wireless setup wizard through the network on the setup button it will show the network name select the network and enter the router security key if it ask ) now open internet explorer on computer and in the address bar type the ip address of the printer and press enter it will open the printer page
now go ahed and insert the cd of printer it will open up and then click on add a device click through nnetwork and complete the installation
and try printing

Jul 12, 2009 | HP Hewlett Packard Officejet 7310 InkJet...

1 Answer

New epson Printer with WIFI asking for the PIN


You mean the wireless network key?

To get your wireless network key, do the following steps:

1. Open Internet Explorer, on the address bar type 192.168.1.1
2. There's no username and type admin on the password. If admin didn't work, use your own password.
3. When you have the Setup Page open, click on Wireless Tab, then click on the sub-tab Wireless Security.
4. There you can see the Security Mode. If the mode is set to WEP, the WEP Key 1 is your wireless key. If the mode is set to the WPA-Personal, the Passphrase or the WPA Shared Key is your wireless key/PIN.

Dec 02, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Can not remember or find network security key


You may need to access the router's setup page to check the security key or the network key you have set up to the router. To do this:
  1. Launch IE and type 192.168.1.1 on the address field using a computer that is wired to the router. It is the default IP address of the router. It will then ask for a username and password. By default, there is no username and the password is admin.
  2. Once you're in the router's user Interface, click Wireless tab. There is a sub-tab under Wireless which is called Wireless Security. Click on it.
  3. There you will find the type of wireless security you have enabled in your router as well as the network key.
Hope this helps!

Nov 22, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Network key


Your network key set on the router setup page. To get this, just open your browser on the computer that is wired directly to the router. then type in the address bar http://192.168.1.1 or http://192.168.0.1 the address will depend on the version of your router, or just try both, it will ask you for a username and password, by default the username is admin and password is password. Once your on the setup page of your router click on the wireless settings on the left hand panel. Then look for the wirelses security settings - if the security is set to WEP - Key1 will be the network key or which ever has a tick. Or its the Security is set to WPA the passphrase is your network key.

Let me know what will happen.

Hope this one helps.

Jul 06, 2008 | NetGear WGT624 Wireless Router

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...