Question about Whirlpool LSR8433K Top Load Washer

1 Answer

WHirlpool Waser model LSR8133HQ0 - tries to fill for rinse cycle

The washer washes then drains then on rinse cycle it tries to fill again but drains as it fills so then water never stops running... HELP !!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Hellow my name is joyce and It sounds like you have a issue with your cut off valve that controls the water flow to your machine in between cycles, this is controled by your timer switch you may want to call technichian to repair. sounds like the only problem you have with the timer is on the rinse cycle not the wash cycle, but it defently needs to be fixed. if I can help you find a repair person please let me know.

thanks you and let me know if I can further assist you.
joyce

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

1 Answer

Top load washer won't go through cycle


modle problem here its the main board common fault with this model good luck

Mar 26, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Kenmore model # 110.244222300, Won't automatically complete wash


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.#######) and you'll see a list of major sub-components with diagrams and parts.

Following is a Whirlpool / Kenmore service manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Initial thoughts are that the Timer is worn / broken.

Here is a description of how to gain access to the console on these washers where you may be able to test the timer. (See the Whirlpool service manual for testing)

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131



Jan 19, 2010 | Kenmore Washing Machines

1 Answer

When my washer gets to the rinse cycle it shuts off with it full of water. It is a whirlpool model # LSR8133HQ0


Have u made sure that ur loads are balanced? If so, it can be the washer balance.

Sep 13, 2009 | Washing Machines

1 Answer

Will not spin on any rinse cycle


Hi, This washer does not have a belt. While the washer is agitating, if you lift the lid will it stop? Some models will agitate but not spin if the lid is up. It sounds to me like the lid switch might be going bad.
If you will get me a model #, I can look this up for you and give you a better idea.

Vic

Jul 05, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Washer - Imperial Series Quiet Wash 2


your washers drain hose is too far down the drain pipe which is causing a siphoning action pull the washers drain hose out pipe some you should be able to hear water dropping into the pipe the reason it only happens in the rinse cycle is because the water from wash is being drained and before the water vacuum is broken the rinse water comes in causing it to keep draining

Dec 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Washer will not progress to the rince cycle.


that is either a problem with the timer , or with the cold water hose at the back of the machine, see the following:



I quote from : The cycle doesn't advance

The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It'sthe timer, if your washing machine fills with water and beginsagitating, but the timer never advances--or if the washer is in a spincycle and the timer won't advance. Then you need to replace the timer.


  • Itmay be a cold-water supply problem, if the washing machine fills withwater, agitates, drains, and spins, but then doesn't fill with rinsewater. See There's no cold water.

  • Nov 20, 2008 | Washing Machines

    2 Answers

    Whirlpool filling and washing, not draining, rinsing or spinning


    Check out your outlet filter, probable it is clogged. Clean this out and refit. Most cases when the drain or spin does not work, it is the filter. This is a suggestion.

    Apr 01, 2007 | Frigidaire FWS833A Top Load Washer

    Not finding what you are looking for?
    Whirlpool LSR8433K Top Load Washer Logo

    Related Topics:

    354 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Mike Cairns
    Mike Cairns

    Level 3 Expert

    3053 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...