Question about Office Equipment & Supplies

1 Answer

Epson sx600fw problems connecting to windows xp wireless through my linksys wrt300n router it just does not communicate i have tried re installing several times but to no avail any suggestions would be a big help,

Posted by on

  • 3 more comments 
  • Anonymous Feb 17, 2009

    i am using a mac and i have similar problems!!!

  • Anonymous Mar 02, 2009

    I have the same problem with a Mac

  • cangelo Mar 10, 2009

    It worked for some time to print wirelessly from xp but now it stopped again (2nd time). On vista machine I have no problem. Scanning over the XP machine never worked.

  • valeriefitzp Apr 16, 2009

    I have a sx600fw printer it will not print we have a wireless connection

    the computer hp address I am told is correct .we have lost the disc for re installing so what do we do, It was working perfect until I changed the ink in the printer!!! we need some help please

  • CavemanUK May 16, 2009

    I have the same problem, I set up the printer wirelessly to my first PC manually, as I had read on forums that there were issues. Everything worked perfectly. Then I set up another PC but this time I decided just to let the installation disc do it all (wrong!!). After the disc had completed, neither PC would print. The only way a can print now is via the wired LAN. I have set the printer back to factory default, still no good. The network config on the printer says connected, excellent signal, but i cant ping it unless i connect through the LAN port. I think there may be a glitch in the epson software, everything was simple till I used that.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Download the drivers from Epson Driver Download.

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I need to make my printer wireless?


You need 1) a wireless router with a USB port that supports the HP OfficeJet printer. 2) The software for your router to run a printer on the USB port. Obviously, you will need a USB A/B male end cable.Note: the scan features of the all-in-one may not work unless the printer is directly connected to the computer. Bi-directional communication is required for scanning and the router software may not support this completely.

Check the list of supported printers closely for older routers. I have a Cisco Linksys E4200 v.2. This router supports all the HP printers that I use.

If this is a new installation of the printer, first install the printer on the computer. If you have Windows 7, just connect the printer to the USB port on the laptop. This will install the OS drivers for the printer. (For Windows XP, go to the HP site and get the full software.)

Next install the wireless router between your modem and computer and set that up. (If you have DHCP (dynamic address allocation), it should be automatic. Otherwise follow the directions.) Next install the router software (for my router, it was Cisco Connect).

My next step was to launch the Cisco Connect program and connect the printer directly to the USB port on the router. In Cisco Connect, choose add a printer and find the printer connected to the router. Print a test page. (At times, I've had to reset the port that the printer is on in the Windows Control Panel Printer Properties. (For the Cisco Connect, the printer is on the DOT4 port.)

Other routers will be set up somewhat differently.

Another option is to have the printer connected to a desktop and then make it a shared printer with the wireless router communicating between the laptop and the desktop. This makes the desktop the print server, so it needs to be on when you want to print. If you have several computers with Windows, this can fairly easy to set up. Make sure that the computers are in the same Workgroup (XP) or Homegroup (Win7). Enable sharing and you are done.

I hope this helps.

Cindy Wells
(who has a OJ 7000 (with ethernet port) and a LJ1320 (USB) connected to the router. Three computers talk to these printers with the laptop on the wireless network. On an older router that didn't support the printers, the laptop was the server for a previous OfficeJet and one of the desktops was the server for the LaserJet.)

Aug 27, 2012 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Five computers networked with Linksys WRT320N router. Operating systems: Win 7.0 on 3 computers (two hardwired)(one laptop - wireless), Snow Leopard 10.8 on 1 (wireless), and XP on one (wireless). Also...


Sometimes this problem occures when you install a later model wireless router.
Try installing the latest Wireless card driver on the XP computer and the LAN card drivers on the other computers except the MAC.

Dec 31, 2009 | HP LaserJet P2015n Printer

1 Answer

Laptop running vista will not print wirelessly


check the cable connections, unplug replug the cable.......then turn it on

Sep 09, 2009 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Can't figure out how to open the UDP port number 427


Don't know why this becomes an issue with these type of HP printers but i think ive worked a way around it...
Heres how you do it: (XP)
Control Panel>Printers and faxes>
Then select "Add printer" and choose the first option (Local printer attached to this computer)
An errormessage will appear saying they were unable to find printer. Click next to find the printer manually...

Now select "Create a new port" and choose standard TCP/IP... Ignore the list of different types of printers, now select "From Disk" and then click next... Once The computer recognizes the printer, it all should be in order...

Hope this could help you...!

Apr 25, 2009 | HP Photosmart C4580 All-in-One InkJet...

1 Answer

Wireless printer problems


Put the printer on default settings and configure wireless settings on it again.

Apr 21, 2009 | Office Equipment & Supplies

1 Answer

INSTALLATION OF EPSON SX600FW


http://support.epson-europe.com/onlineguides/en/sx600series/html_z/p03.htm

this is the web site that explains how to connect to the network. i hope this helps.

please rate good.

Mar 01, 2009 | Epson Stylus Multifunction Inkjet Printer/...

5 Answers

Connecting wi-fi on Epson SX600FW


I hada the same problem. I used the settings on the actual printer rather than through the software to input the information it needed and It works fine now. I was able to set it up on my husbands laptop without any problems, I just added his laptop through installing the software on his laptops as it had picked up the signal and was showing in the Network and sharing centre on Windows Vista premium. Hope this helps. I think you need to take the wire out now and now load it as wireless. You need to use the wire first to connect then take it out to connect to the wirelss network. My router is a Sky router.

Tiptap

Jan 01, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

I have an Epson Stylus Photo R220 Printer connected to a linksys print server, but



Well, The first thing you should do is to try to test of the print server is properly connecting to the printer. Check the linksys printserver manual and look for how to print a status sheel from the print server. Once done, get the IP address of the print server. Go to your laptop and navigate to control panel/printer. See if you have the driver installed or download the Vista Drivers from Epson.com/support. During the installation, it will ask you what connection type your computer uses. cancel out of the installation or choose LPT1 as the port. Once done, go back to control panel/printers.Right click the R220 icon and navigate to properties. Select ports after that and add a new port. Select Standard TCP IP port after that. Once done, the wizard will appear. Input the IP address of the printer and finish the wizard. you should be good to go after this.

Sep 30, 2008 | Epson Stylus Photo R220 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98816 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...