Question about Thermasol Steamshower Generator AF Series - for 140 Cu. Ft. - SSA-140

1 Answer

Thermasol steam generator constanly taking on water

-water keeps running through unit and out steam head non stop. apparently this started with a dipping, and progressed to full flow. I assume the problem is the float. I have removed the float and tested for continuity, and get continuity regardless of position of the float. this unit has no power flush capabilities. I beleive the model is a US 40, with a standard style head.

Posted by on

  • willfen Mar 04, 2009

    you pretty much **** bad



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

The water feeder leaking and you will need a new one call 800 776 0711

Posted on Apr 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Steam shower no longer puts out steam, only heat.

It is no longer getting water to the unit. Valve closed, filter stopped up, or the float valve is dirty. This is something that must be cleaned regulaly especially if you have hard water. Robert

Jun 13, 2012 | Thermasol Steamshower Generator Classic...

1 Answer

Light flashing no steam

Please call Thermasol tech support at 800-776-0711 and our techs will gladly help you out.

Jul 06, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

TIML light is on and nothing works

Please contact Thermasol tech support at 800-776-0711 and our techs can help you get your unit running if you call will model and serial number will be very helpful.

May 21, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

I have an old thermasol steam unit 84 salvaged from a bath reno. there is a check valve on one pipe and a union fitting on the other. unfamiliar territory, how do i hook it up and what potential problems...

Check valve is the cold water inlet---valve keeps water from siphoning back out causing unit to boil dry. Probably is quite a bit of lime inside from "hard" water

Feb 06, 2010 | Thermasol Steam Bath Generators - Ambiance...

1 Answer

LCD shows TTMPL and steamer doesn't work. The model is SET-NTS-SN of Thermasol Signature series.

Funny, mine starting displaying the same thing around the same time. I contacted Thermasol and apparently the temperature sensor in the generator unit is malfunctioning and needs to be replaced. They're sending one to me, i'll let you know if it works.

Dec 14, 2009 | Thermasol Signature Series Control...

1 Answer

Steam generator will not activate- thermasol model ASD300A

how do you know the unit has power?

what control do you have?

does it light up.

Mar 15, 2009 | Thermasol Steamshower Generator AF Series...

2 Answers

Thermasol Pro 150 - 25094. Doesn't work. I have a very simple controller. Just a gib gray button and four other led lights near the 15 , 30, 45, and 60 lights to set the time. I think I need to do the auto...

yes thats correct or if you have manuel flush at the genrator there is a ball valve. open for minutes then close and run generator for thirty minutes without anyone in the shower.

Mar 12, 2009 | Thermasol Steam Bath Generators - Ambiance...

2 Answers

Unit not working - don't know how to remove

the unit willnot effect any water delivery anywhere in your house.

Mar 03, 2009 | Thermasol Steamshower Generator AF Series...

1 Answer

Thermasol model 140 does not produce steam

call 1-800-776-0711 and get a EVA# to send unit in for repair.

Jan 10, 2009 | Thermasol Steamshower Generator AF Series...

Not finding what you are looking for?
Thermasol Steamshower Generator AF Series - for 140 Cu. Ft. - SSA-140 Logo

Related Topics:

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermasol Electrical Supplies Experts


Level 3 Expert

652 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1906 Answers

Are you a Thermasol Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides