Question about Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV

1 Answer

Continuous red blinking light, no picture

I have had my 70 inch xbr since 2004. The picture just went out two days ago. I have a red indicator light on the front that blinks continuously. Can anyone tell me what might be the problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Lamp is probably burned out.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV was working fine when we went to bed Monday (August 30) night. Got up the next morning and turned it on. It appeared it was going to come on, the green light flashed and then the lamp indicator light...


1. Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature, this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds 4. LED stops blinking after 70 seconds of plug in but will not power on. Check for 3.2 volts DC at connector LE pin 3 and 4 on the Control PCB, if low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector LE pin 3 and 4 check good. Suspect the E2P PCB part # 934C121001 6. (LED does not stop blinking after plug in) Disconnect the USB connector from the card reader to the front from the Chassis, if the LED stops blinking after 70 seconds replace the Card Reader part # 299P271010. 7. (LED does not stop blinking after plug in) Disconnecting the USB connector from the Card Reader did not help. Remove connector FC from the FMT PCB and plug the unit in, if the LED stops blinking after 70 seconds with FC removed suspect a problem on the FMT PCB (part # 930B924002), if the LED keeps blinking with connector FC removed suspect a problem on the DM PCB (part # 934C116002). 8. (LED does not stop blinking after plug in) On the DM PCB (part # 934C116002) check C81A2, C81A3, C81B3 and C81B4 (1000 UFD, 16V, 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). See Service Tip VS-78A 9. (LED does not stop blinking after plug in) On the FMT PCB (part # 930B924002) check C8F19, C8F21, C8F22, and C8F27 (16V 1000 UFD 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C) See Service Tip VS-78A

Sep 08, 2010 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Red power light continuously blinking. no picture no sound.


It could be the lamp went out and needs replacement. The Toshiba website states when this happens to unplug the televison for 10 minutes then plug back in. If that does not work then try another power outlet. If that does not work then call for service

Sep 12, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

SONY KDF70XBR950 TV. NO PICTURE OR SOUND. FIVE FLASHING RED LIGHT


5 times blink code means Lamp Driver error that can be problem of ballast supply or Lamp.
How old is this TV? Have you replaced Lamp recently?
Service manual of TV can be downloaded from HERE for small fee.
Let me know your finding to provide you more info.
Thanks.

Sep 11, 2009 | Sony Projection Televisions

1 Answer

TV has sound no picture, Sony Videoscope xbr


Please post both the exact model number (on the back) and the blink count. The standby light should be blinking a repeated pattern. That info will indicate the problem circuit and allow us to provide you with the proper parts/steps to resolve this.

Thanks,
Dan

Feb 10, 2009 | Sony KP-53XBR45 53" Rear Projection...

1 Answer

Toshiba TP43H95 projection tv has power but no picture


If it shuts off and then the power light starts blinking red or it never comes on but the power light just blinks red continuously that is usually indicative of the convergence ICs (STK 392-110). You never want to replace the ICs without also replacing the resistors that are associated with them. There are usually 6 resistors, one for each of the colors and there corresponding direction, IE Red horizontal, red vertical, blue horizontal, ect. In the case of this model tv all of the resistors are 2.2 Ohm and 2watts. You will find them right where the STK 392-110 ICs are. Right in front of them. They are blue and have this color code on them. Red, red, gold, gold. These are represented by stripes on the resistors. You can get the parts from www.bdent.com They carry the ICs and the resistors. If you do not feel comfortable completing this repair I could do it for you if you send me the board. My email address is: missionelectronics@sbcglobal.net The cost is 375.00 and that includes parts.
Good Luck.

Nov 03, 2008 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Power light blinking continuosly


First off check your lamp or replace it. You can never have too many lamps..........in the last minutes of overtime ! Are you kidding Me! If lamp doesn't work, you will need to find qualified servicer. Try craigslist or tv repair in yellowbook
Craig www.classtorations.com

Jun 08, 2008 | Hitachi 70VS810 70" Rear Projection HDTV

1 Answer

No Picture - Lamp Indicator Blinking


This may be the main power supply, or the lamp supply. This is providing that the new lamp is okay.

The service tech will swap out the modules to service the set.

Jerry G.

May 15, 2008 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Status Light Flashes Red


first did you getthe lamp from miths and if notyou could have bought a bad lamp. you need to get a lamp form mits if you did not buy from them. if you did buy from mits have them replace the lamp it has a 90 day warranty. try hitting the menu and device / input buttons for 5 sec and repost the blink code. it is a 2 digits blink code. (ex. 23 or 33 or 26 like that)

Apr 20, 2008 | Mitsubishi WD-62525 62" Rear Projection...

2 Answers

Tv cuts off and green light flashes


the tv will try to reboot a few times. just let i try and eventually it will start blinking red. if you could count the red blinks then i can further assist you.

Sep 23, 2007 | Sony Grand WEGA KDF-60XS955 60" Rear...

Not finding what you are looking for?
Sony Grand WEGA KDF-70XBR950 70" Rear Projection HDTV Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...