Question about Televison & Video

4 Answers

Panasonic modelCT36G24A cannot program a universal remote to work tv. the power light on front of tv does not go on when you turn on power button, but the tv works. does this light need to illuminate to work a remote?

Posted by on

  • dem4540 Feb 05, 2009

    remore RCA RCU410

  • dem4540 Feb 05, 2009

    i will get the remote and see if it works

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 48 Answers

If you want you can get a replacement remote here:

http://www.replacementremotes.com/store/productdetailp.cfm?productid=22440

No, that light doesn't come on to use a remote.

Posted on Feb 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

The led should come on in any case, look like you may have a faulty IR sensor on TV.

Posted on Feb 05, 2009

  • Ginko
    Ginko Feb 05, 2009

    Ensure first that the universal remote is programmed correctly for your TV.

    Also test a different universal remote, or the original TV remote, or a remote that you know it was working on this TV.

    If the TV does not work with any remote, then the TV may have a faulty IR sensor, that is not an expensive repair.

    If instead the TV works with a different remote then you need to program this remote in the correct way.

    In that case give us more details on the remote model if you need further support.


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi!

Please tell the model no. of the universal remote you are using

Posted on Feb 05, 2009

  • Rylee Smith
    Rylee Smith Feb 05, 2009

    The light of ir sensor is not visible by naked eye. If you want to see if it is working then please use a digital camera on video settings and then press keys on the remote and try and see if you can see any blinking lights on remote or tv's ir sensor

  • Rylee Smith
    Rylee Smith Feb 05, 2009

    Please look at this link Universal Remote Codes



    Thanks

    Rylee

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

What is the model number of your universal remote?

Posted on Feb 05, 2009

  • rockfixya
    rockfixya Feb 05, 2009

    you need to set a code to your remote.
    Do you have remote code of your TV?
    if not then request your code from>>

    http://remotes.com/store/free_customersu...

    after getting the code you need to put that code to your remote... by reading Instructions from remote user manual.

    if you do not have remote manual then follow below link>>

    http://www.universalremote.com/downloads...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need code to program audiosonic universal remote to dick smith tv


Give this a go
1 turn on the tv you want to program to work with the remote control. hold the remote in a straight line in front of your tv at a distance of less than 1 metre.
2 press and hold down the remote device mode button (tv) and the (power) button at the same time until the red light indicator lights constantly.
3 press the power button
4 the (tv) button will blink continuously in red meaning that the remote is searching for the code of your tv.
5 when the remote finds your tv code the tv will turn off.
attention: when the tv turns off you must immediately press the (ok) button to avoid the remote to go to the next code.
6 by pressing the (ok) button you have already stored the code. the (tv) button light will turn off.

Feb 05, 2017 | Universal Televison & Video

1 Answer

How do u program a phillips universal remote to a panosonic fm radio model # pv-c1320


Philips Universal Remote control Instructions
  1. Turn on the device (TV, DVR, etc.) you wish to operate.
  2. Press and hold the SETUP button until the red light indicator remains lit, then release the SETUP button.
  3. Press and release the desired mode button (TV, DVR, etc.).
More items...

Philips Universal Remote control codes for TV, VCR, Set-top Box ...

www.directutor.com/.../philips-sru210327-universal-remote-control-codes-tv-vcr-set-top... How to setup phillips universal remote to panasonic tv Google Search ..not sure if it will help you out but have a look.

Nov 29, 2016 | Universal Televison & Video

1 Answer

Panasonic tv model tc-p42c2 remote is inop


It is a common thing that all the buttons of a universal remote control might not work, as it meant to be. Try an other code. If this too won't help you, there is no other way than buy a new original remote control for your Panasonic TV. You can buy in from the authorized service center for Panasonic at your town. Just give them the exact model number to your TV. They will provide you the original one.

Jul 20, 2012 | Panasonic TCP42C2 42 in TV

1 Answer

Universal remote code for a panasonic ct-27g14a


Two things you can do:

GOOGLE THE NUMBER OR MODEL OF THE REMOTE AND LOOK FOR THE INSTRUCTIONS FOR PROGRAMMING IT.

GOOGLE THE MODEL NUMBER ON THE REAR OF THE TV WITH THE WORD REMOTE AFTER IT FOR A DIRECT REPLACEMENT.

LET ME KNOW IF YOU NEED HELP

Mar 15, 2012 | Panasonic CT-27G14 27" TV

1 Answer

Panasonic PV-DR2714 will not turn on and i lost the remote


Hello Bobby
You haven't given enough details about the fault to your Combo. What do you mean my 'power button has coninuity on board'. I assumes that you get power LED at the front of your device lights up when you switch ON the main power switch, and the unit refuses to power ON and work further. If so, just make a factory reset to this set as it will reset the memory IC. To reset the unit to its factory reset do the folloing. But to do this, the power LED on the front panel of the unit should light up. Otherwise, the fault will be to its power regulator section. To reset the unit to factory reset:
[1] Turn the Power ON.
[2] Hold down both PLAY/REPET and FF on the unit more than 5 seconds. The power will shut OFF. Please ignore "NO CASETTE" warning.
[3] Perform initial set up refering to its user manual. You can see instructions to initial setup at page [16] of the user manual to your device. OK.

Dec 07, 2011 | Panasonic PV-DR2714 27 in. TV/VCR/DVR...

1 Answer

I have a ge universal remote and a panasonic tv but i dont have the directions on how to program it or what the codes are to set it up. i need step by step instructions.please help


There are two types of GE universal remotes. Does your remote use the 4-digit code or the 3-digit code?

These codes listed below are not for combination TVs (TV/VCR, or TV/DVD). If you have a combination tv, see the appropriate code list here: http://www.jascoproducts.com/support/universal-remote-codes.asp .

The 3 digit codes for Panasonic TVs are 003, 054, 055, 062, 070, 148, 149, 170, 171, 374, 381, 437 . If you have an LCD or Plasma Panasonic only try 170.

The 4 digit codes to try for Panasonic TVs are 1182, 0171, 0148, 0054, 0170, 0062, 0374, 0381, 0437, 0950, 0003, 0070 .

Next to program the remote: Turn on the TV manually. Press and hold the Code Search or Setup button (depending on your remote). Hold the button until the indicator light comes on and then release it. Then press and release the TV button. Type in the first code for your remote and TV combination. The indicator light should go off. Then point the remote at the TV and see if the TV turns off. If it doesn't, repeat the above steps. Once you have a code that seems to work, check if the remote controls all of the functions that you need (based on the available buttons on the remote). If you have a code that turns off the TV but doesn't control other functions, continue trying other codes.

There is an option to search through all of the codes of the remote to program the remote. Press and hold the Code Search or Setup button. Release the button when the indicator light comes on. Then press and release the TV button. Now press and release the Power button on the remote repeatedly and wait until the TV turns off. Do this slowly (pressing the Power button every 2 seconds). When the TV turns off, press Enter on the remote to save the code. Then test the remote. If the remote doesn't control all the functions of the TV that you want it to, then repeat the search.

Please note that the codes in most universal remotes are limited to those for devices released 6 months or more before the remote was programmed. If your remote is older than your TV, then you may need a new remote.

I hope this helps.

Cindy Wells

Aug 06, 2011 | GE JASRM24912 Remote Control

1 Answer

I need the codes for panasonic tv for my jumbo remote


If you are referring to the Jumbo Remote, the codes can be found on the website at http://www.jumboremotecontrol.com/remote_control_code_list.html.

To program the remote, use the following steps:

Program a Manual Code:

1. First turn on the device that you want to program such as your TV or DVD player.

2. Point your remote control at the device.

3. Press the button on the remote that corresponds to the device. If you want to program the TV, press the TV button.

4. Press the "Code Search" button for about 3 seconds until the light stays on.

5. Enter the code for your device using the number pad. The light will blink each time you push a button. If the code works, the light will turn off. If the light flashes, that means the code did not work. There may be multiple codes for a device. If a code does not work, start from the beginning by holding down code search until the light stays on and use a new code.

6. Press the power button to test if your device turns off. It it does not turn off, repeat the process with a new code.

Here are the codes that they list as being potentially applicable to your television:

003,051,055,062,070,148,170,171

Good luck!

Jun 25, 2011 | Universal Remote Control Remote Control

1 Answer

Need the remote code for this model tv


Hello

Three digit universal remote code for Panasonic are:-
003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171

Four digit universal remote code for Panasonic are:-
0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Note: Switch OFF and switch ON your TV with its front panel power control switch [Main power control] each time before proceeding for an other code.
OK.

Jan 20, 2011 | Panasonic PV-DM2799 27 in. TV/VCR/DVD...

9 Answers

Philips universal remote codes


For the majority of phillips/magnavox universal remotes: Hold code search button down till red light satys on. Press the tv button and the red light should blink and stay lit. With the tv on, push the power button repeatedly until the tv turns off.(dont push the power button again after the tv turns off or it will go to the next code). Push the mute button to save the setting.

Feb 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

21" Panasonic TV W?DVR


Hi : if you're having problem programing the philips remote, you can you used the search option to find the right code for your Panasonic TV. In order to search by auto without a user guide please follow the step below.

1.Turn the panasonic tv on.
2. On the univercial remote control there a button mark code search or search.
Pressand hold down the code search button until the LED light come on steady.
3. Press the TV button onthe univercial remote one time.

4.Press the power button on the univercial remote severail time until the tv turn off
When tv turn off press the OK or ENTER button on the univercial remote control to save the setting.

Good luck.

Dec 13, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...