Question about Sony PlayStation 2 (PS2) Console

1 Answer

Picture not showing clear

When the system is turned on, the sound is excellent but picture is not quality is not showing clear. It's mostly greenish/brown then sometimes gets dark.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

If you use a scart connection then make sure it's in the connector tight. A loose scart lead can cause display problems.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make colour best in ps2 game


your tv will have more control of colour/picture quality. but depending on what cable you are using. if you are only using the S-video cable you will get better picture using the Component Video (Y, Cb/Pb, Cr/Pr) cable. change the video output setting from RGB to composite mode and that should improve the picture quailty

Mar 20, 2014 | Sony PlayStation Video Game Consoles

Tip

No picture, no sound, but ps3 turns on. how to fix this


if your ps3 turns on like normal but there is no picture (video) and or there is no sound follow the tips bellow to fix this
  • Have your ps3 in standby mode (red light).
  • Now, press and hold the power button in the front down. Your ps3 will beep twice. Let it go almost exactly after you heard the second beep.
  • Wait 10-15 seconds. A display will show up, and just answer yes to all!
that should fix it

most of the time this problem occurs when you change the cable to HDMI or scart

on May 08, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

When i turn on my ps3 I can hear it but no picture shows up. Everything is plugged in and its the same for all tvs!


Did you have the setting for picture set to hd on another tv beforehand? If so, plug it back into a high quality tv and change the setting back to a normal television

Jul 25, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

When we turn on our NES system, after about 20 sec...


If you are using an RF Switch, and notice the picture quality degrading (static or "snowy" picture), we recommend trying a different RF switch. For information on ordering a replacement, click here. If that doesn't solve the problem, your system will likely need to be replaced. Due to the age of the system and games, we can no longer offer factory repair. Please click here to find out what options might be available.

May 20, 2010 | Nintendo NES Console

1 Answer

My screen on my nes is blurry how can i fix that


If your screen shows a blurry image it can be a few possible things (and only these things).

1. The first and most obivous problem is being on the wrong channel - for example, if you are on Channel 3, but the switch on the back of your system is set to channel 4, you'll see a VERY fuzzy picture; simple switch to the other channel and it will come in clear.

2. Now...assuming you are on the correct channel, does your television receive other pictures clearly (for example if you change to a normal broadcasting station and it is still blurry, then it is a problem with your TV and not your NES system). Another way to test is to simply switch TVs and see if the same picture problem occurs.

If 1 and 2 are not the problem, them we know the problem is with your NES system and this should be an easy fix.

If you are using an RF Switch, then it is most likely the pin on either end of the switch has become bent (or was bent and now is bent back) and will no longer give a clear picture. The easiest way to test this is find a set of AV cables (any av cables - these are the red, white, and yellow cables that often hook DVD players to television). Find a set and just take one of those ends and connect it to the side of the NES system into the circle that says VIDEO and take the other end of that same color and put it into your TV into the circle that says VIDEO (note that the colors don't always match up on the newer TVs, just make sure that if you are using the yellow end of the AV cable and plug it into the video on the NES that you plug the other yellow end of the av cable into whatever color on the TV says VIDEO! Then change your tv to the cannel for that AV slot (usually AV 1 or INPUT 1). Turn the nintendo back on and see if the picture comes through clearly - if it does, it means you had a bad RF switch and you can either get a new one, or just use AV cables instead!

One of the above problems IS the problem - I've repaired over 1000 NES systems and 95% of the time it's just a bad RF switch (so the AV cable test works best)

Jan 14, 2010 | Nintendo NES Console

1 Answer

Getting vertical lines through screen w/ PS3. I've eliminated periphals including TV, Game/video disc's, ports on unit and narrowed it down to a system issue. Upon turning console on I am unable to even...


This seem to be an issue with one of the electronic components on the main board for the video section. Check for bad resistors, leaky/swollen capacitors, bad ICs, etc. Mostly look for components in the video scetions. See if you can obtain an service manual and go thur the troubleshooting steps there.

PLEASE VOTE IF THIS WAS HELPFUL. GOOD LUCK AND THANKS.

Nov 21, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

My 360 turns on but no picture appears although sound is present


This is a very common . The cause clearly evident bellow.
The good news it that it can be repaired Permanently with a
proper X clamp mod , The hardware responsible (The X clamp)
is still currently being used in new and replacement units .3248784.jpg

Jul 13, 2009 | Microsoft Xbox 360 Console

1 Answer

Won't show the picture or sound


Here's one possiblility.

There should be a switch on the x box cable that goes from High definition output to analog.

Try changing the swith setting.

Jan 02, 2009 | Microsoft Xbox 360 Console

1 Answer

Hello my name is steve


Maybe Your A/V cord went bad maybe you should try buying a new one

Dec 13, 2008 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Sony PlayStation 2 (PS2) Console Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles Experts

Iron
Iron

Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Marc
Marc

Level 2 Expert

68 Answers

Are you a Sony Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...