Question about Zebra Z4Mplus Label Printer

2 Answers

Print problem everytime we try to print 1 label it come out 2 blank label and printed in the 3nd label. any idea cause this. Thx

Posted by on

  • krisze Apr 06, 2009

    I have a zebra Z4Mplus and the problem with the printer is that it prints about 25-30 labels correctly and then suddenly skips about 2-3 labels and so on and so forth.......

    If anyone can find a solution for this problem i will be glad to know about it and hence try to work on that.

    I AWAIT YOUR RESPONSE.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I was having the same problem with my Z4M. I reset the defaults on the printer and it now prints on only one label. Maybe this will be the fix for yours?

Posted on Jul 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

You should make sure you have the label program set for the same size label you are printing and calibrate the printer before you start a roll.

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi all~ my zebra printer print blank non-stop everytime power on printer. we need send jobs first just can power on printer to stop printing blank non-stop.


When you power that printer on it will automatically calibrate which can kick out up to 6 feet(2 meters) of blank labels. After that is done if you have an issue it should display an error.

Sep 29, 2015 | Zebra 203DPI Printer

1 Answer

Label is printed fine but each printed label print blank line before label print


To isolate problem run a test label from printer.Does the same thing happen? If so it is a printer problem.If not the problem is in the document itself.

Apr 24, 2014 | Zebra LP 2844 Thermal Printer

1 Answer

Everytime i turn on my zebra tlp 2844-z it prints 2 blank labels.anyone please help me to solve this problem


Are you using the correct labels?
Direct Thermal Printers use different labels than printers with ribbons.
If you print a label using labels from a ribbon printer in a direct thermal printer they will come out blank.

Jan 28, 2011 | Zebra TLP 2844-Z Thermal Label Printer

1 Answer

Label double print


It's possible that the printer did not get a good calibration on the size of the label. There's an optic sensor looking for the gaps in the labels. A test would be to turn the printer off and back on again. When it is ready, just press the feed key. If one label advances then the printer had a good read on the label size. The idea is to see if the printer works ok by itself first.

Now print a label - if you get two labels then you have to look at the software / printer driver as the cause. The printer will only do what it's told to do.

Hope that helps !

Apr 14, 2010 | Zebra LP 2844 Thermal Printer

1 Answer

My dymo label printer is printing 2 labels at a time. One has the label I want. The other is blank. Can you help me?


There are a few common reasons this is problem can exist.

1.) the incorrect template is used when creating the label

2.) the labels are installed incorrectly - the labels must be loaded and pushed against the left side of the printer and lid closed when printing to ensure the labels don't "wander" out of the sensor's view.

3.) the label sensor is covered by some debris - sometimes a label jam can cause a piece of label to become stuck on the underside of the sensor thus blocking its view.

4.) The labels are defective - if you have another roll of the same size, try it to see if it has the samme issue.

Mar 24, 2010 | Dymo LabelWriter 400 Thermal Printer

1 Answer

Loftware labels printing off staggered.


Most reasons for this is a slight adjustment problem with page length. You can recalibrate the printer via the menu system, doing it this way will adjust the sensors with new settings

Mar 11, 2010 | Zebra Eltron TLP 2844 Thermal Label...

2 Answers

I get 2 labels(1 with data and 1 blank)for every label printed


THE LABEL SENSOR IS NOT SENSING THE BEGINNING OF THE NEXT LABEL

Clean the photo eye that senses the label gap with a q tip and alchol

Open side door release print head and remove label stock you will see small photo eye clean

put printer in manual mode( switch 1 on to and 1 on botom on

turn printer on it should advance one label and hit skip it should advance another

put back in computer mode

should work now if it still skips check yur label desigh=n software and label mode (continuous or sense label)


Best of luck to you



Dec 29, 2008 | Intermec EasyCoder 3400 Thermal Label...

1 Answer

Zebra 2844 print blank page


Possibly because the button does not work, causing the advance of the labels. Replace it.

May 13, 2008 | Zebra Eltron TLP 2844 Thermal Label...

Not finding what you are looking for?
Zebra Z4Mplus Label Printer Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

lancer284

Level 1 Expert

35 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Zebra Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...