- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You are likely to have a module bad....part number BN94-00864A and if you take it out (unpluggs) you should inspect it for capacitors that may be domed or pooched up at the top. If so they should be replaced first before getting the module as the capacitors are about $1.00 each. Do a search for Samsung parts online if you need the module and call them toll free
Tv power supply board have problems.That the board,where the power a/c cord plug into it.U have all the tools,can do basic soldering and understanding basic electronic?Tv have dying parts call capacitors on the power supply board,searches these dying capacitors,it all way bulges or puffing up on it tops.Repaced all these dying capacitors soon to dead capacitors,that are bulges or puffing up on it tops.Will solved this delaying and clicking sounds and power up quickly.Or tries websties like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
This tv 100% have power supply board problems and might also have the T-CON decoders board problems too.The power supply board,that the board,where the power a/c cord plug into it.The T-CON decoders board,that the board sit wright in the middle bottom of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.Replaced the power supply board,should get ur tv power up right away and work,no more series of clickings noises.But,if the tv still have alots colored pixels lines on the screen.The T-CON decoders board it also dead.Replaced the T-CON decoders board too.
1. Lay the TV Face down on a padded Table and removed all the screws. The tback just Pops off. 2. There is a protective cover over the circuit board. unscrew and pull off. 3. Unhook all of the wire attachments that connect the board to the rest of the TV and unscrew the 6 screws that hold the board down and pull it out. 4. There may be bulging capacitors on the top right or somewhere on the board. You can take the whole board into a repair shop and they can tell you what replacements to buy. (Upgrad to 35v to prevent future problems) 5. De-solder the backs of the bulging capacitors and clipd the leads. 6. Put the new capacitors in their place (watch for the polarity. bend the leads to the side to hold them tight and solder them down. 7. Replace the board.
****WORKING INSIDE A TV IS DANGEROUS DUE TO HIGH VOLTAGE***IF UNSURE, LEAVE IT TO A PROFESSIONAL.
There is a problem with the power supply in your TV. The regulator switch is causing teh clicking sound you hear. In order to fix it, you will need to replace the power supply. This is done by taking off the back cover of the TV, locating the power supply which is usually a yellow board that will have many high voltage capicators on it and replacing it with a new one.