My mom and dad just had there tv in to get the remote sensor repaired and when they brought the tv back now when the news is on and there is stuff appearing at the bottom of the screen you can only see the top 1/2 of the words. Like the picture needs moved up.
It is possible the picture format is set to stretched. look for a button on the remote that can do this. it could also be the signal. try looking at a different channel that has lettering along the top and bottom and determine if the entire picture looks like it needs to be moved up. if after all this you can still determine that the picture is misaligned post the model number and i can help you move it up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hey, don't worry. i have 2 answers 1 . if you feel that you are poor then get away from zwinky and think that it is just a website and it is not like as good like your mom or dad who cares. so neglect zwinky 2. if at all you think that zwinky is my world go and search this zwinky multi zcard generator 2013 download and download this and you will get your zcards at a flash of second when you finish generating bye luvs_yah_lots123
sounds very much like cold solder joints
or small cracks around transformer pins and transistors on heat sinks
if you used too much windex on screen it could of disabled the remote sensor
needs some thorough checks
IF THE TV DOESN'T HAVE A BUTTON U NEED THE REMOTE, U MAY GET AWAY WITH A UNIVERSAL BUT ONLY IFNITS THE SAME BRAND MAKER OTHERWISE U MAY HAVE GET THE REMOTE IF POSSIBLE OR USE A VCR AS THE NEW TURNER FOR THE TV, WHICH U CAN USE THE VIDEO OUTOUT TO INPUT THE SIGNAL INTO THE TV
Normallly, if the picture size button on the remote for the television does not achieve the desired affect, then, a cable box or a satelite box is where the change needs to be made. For example: A MotorolaCable box needs to be set up to go to a wide screen or zoom when an analog signal is detected. Some DishNetwork boxes have Size buttons on their remotes and also in their main menu. It's difficult to determine the repair without knowing the types of the peripherals. Hope this helps.
My dad and I fixed the TV/Video problem over the weekend using one of the solutions suggested. Make sure you stay away from the red wire running from the back of the tube to the circuit board.
1. Take the cover off the back of the TV. 2. On the bottom of the TV is a circuit board that is mounted on top of a plastic tray. Remove the cables running from the speakers by squeezing the tab on the white plug and pulling them up and off the board. 3. Looking at the back of the TV, pull the board+tray out (barely secured in there) and flip it 180 degrees so you're looking at the front of the board. 4. Desolder and remove the TV/Video push button. It's labeled on the PCB, and should be the second button in from the left. 5. Place the tray back in the TV and make sure the other buttons still remaining on the baord are aligned with the buttons on the front of the TV. 6. Put the cover back and you're done.
TV works as good as new again. Of course I can't use the TV/Video button on the TV itself, but the remote handles that fine. 20 minutes max, and no repairman needed.