Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet washer not draining

My whirlpool duet washer will not drain (after a load, it slowly fills back up)

Posted by on

  • Anonymous Feb 05, 2009

    my duet does the same thing...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Sounds like the pump needs replacing located under the drum

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool duet front load washer is giving a F21 error code. It will not drain. When I blow into the drain hose on the back of the washer it will start draining. But everytime I run a new cycle it will...


whirlpool duet front load washer this video is on a bosch but it will help you Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 30, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front loader duet hd washer gets stuck in the wash cycle with the error code of F02. What is F02 mean?


Whirlpool Duet front-load washer F02 usually means it is taking over 8 minutes for the washer to sense that the rinse or wash water has drained, which either means that the drain/filter is clogged or the pressure switch/tube is clogged (causing both the washer to over-fill with water and not sensing that water has drained).

To clear out the drain/filter, tilt the washer backwards a little for easier to the kick-plate and support the front bottom with a wood block or similar, remove the front kick-plate's (3) retaining screws and swing the kick-plate up out of the way. The filter drain is behind the white knob in the center, be prepared with something to catch any remaining water and lots of towels to soak up any spills, and turn the knob counter-clockwise to remove the filter.

Jan 11, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My Whirlpool duet front load washer fills randomly with water when not in use and the door is open. Usually it only fills up to the door opening but this morning it was over flowing. ??????


check and make sure you do not have a siphoning problem. make sure the drain isn't backing up in the machine. This could also be a problem with the water inlet valve. Its possible that its not closing all the way when the machine is off. If its dirty water entering washer then the problem is siphoning from the drain. If its clean watet the valve is bad.

Feb 17, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Water filling up slowly in the tub


The problem can actually be caused by the water inlet valve leaking by, or a faulty pressure switch. Both are fairly simple to replace. The following link explains how to diagnose the problem:

http://www.fixya.com/support/r3753262-front_load_washer_fills_when_not_in_use

I have included steps on how to replace both parts, and web resources to search for replacements. If the model number is correct, the replacement part numbers you may need are:

Water Inlet Valve - 8181694
Pressure Switch - 8181695

If you have any questions about this repair, please post back and let me know. I hope this helps you.

May 19, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Water drains back through the fill lines.


THE COLD AND HOT WATER CANT GO BACK IN TO THE WATER VALVE ! NOW IF THE DRAIN WATER COMES BACK IN AFTER DRAIN MODE LEFT DRAIN HOSE UP A FOOT TALLER THIN THE WASHER OR CLEAN YOUR PUMP THIRS A CAP ON THE PUMP YOU CAN REMOVE TO CLEAN . NOW IF THE WASHE IS FILLING UP WITH WATER WHEN ITS OFF THE WATER VALVE IS BAD

Apr 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

After water drains, it slowly comes back and fills in the drum over time.


Use the attached video to show you how to access the inside of the machine.Ignore the other parts other than access and re-assemly.

Apr 30, 2009 | Whirlpool GHW9150 Duet Washer

1 Answer

Water backs up into washing machine after washing a load.


check your drain hose and drain pipe,if not that then i think your inlet water valve is not closing all the way,try it on cold only see what happens,then try on hot only see what happens,let me knoe what you find-mike

Jul 12, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool duet washer leaking from bottom back..


sounds like you need to check your back drain could be the drain is clogged.Fill with water and see if it comes from the drain

Nov 06, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...