Question about Ariston Technologies Dishwashers

1 Answer

Ariston Elixia LI68 Duo dishwasher will not start

We have an Ariston Elixia LI68 Duo dishwasher (and no manual). Although we can select the wash cycle, and it beeps when we close the door, the machine does not start.

We have tried holding down the programme select button for several seconds, which results in several beeps and a reset.

The machine is now displaying two flashing green lights on the wash cycle programme display - the third and fourth lights from the left are flashing. The icons are bare legible, but seem to suggest a rinse or spray, and a special glass cleaning cycle (with a sparkling wine glass icon)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Same problem , i fixed by opening the door compleet then cleaning the bottom of the door with a kitchen cleaning paper that may do it afther that disconect the power compleet whait 1 minut connect it al again and it should work , don't ask me why this cleaning action i just found it out

Posted on Aug 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone tell me about the washing cycle symbols on my Ariston LS12.EV03. It came with the apartment with no manuals...


Best I could do for instructions in English: http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Ariston/Dishwashers/AF350X_034628gb.pdf

Here is a site with a lot of manuals for Ariston products, with other brand names: http://www.manuals.club/results_alpha.php?ctext=ARISTON+DISHWASHER+LS12-EVO3

Mar 05, 2015 | Dishwashers

1 Answer

Ariston Dishwasher Detergent dispenser


you have 2 options.replace the timer on the unit or when you start a load wait 10 minutes and put a half cup or a little more of detergent into the water in the dishwasher.

Jan 05, 2008 | Ariston Technologies LL64WNA Built-in...

1 Answer

L 63 B NA Ariston


Your dishwasher is equipped with a safety system which is able to
detect any operating anomalies. These anomalies are reported by
one or two wash cycle indicator lights "G" flashing rapidly.

24238319-0h3kxpflbez5mdeb5anq3st4-3-0.jpg In this case could be:
  • Drain motor disabled
  • Filters clogged
  • Drain hose blocked

Dado

Apr 24, 2014 | Ariston Technologies Dishwashers

1 Answer

I have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left


Here is a dishwasher manual search engine, they will find the Beko user manual within minutes. Just send them a search request for your model.

Aug 11, 2012 | Dishwashers

1 Answer

Ariston dishwasher LS609 the cycle nob does not


Had the same problem with my 12 year old LS609. The cycle knob sits on top of what Ariston calls the control board. This control board is most likely to be your problem. It was in my case.

May 14, 2010 | Ariston Technologies LL64WNA Built-in...

2 Answers

Ariston LS 2020 taking more than two hours to go through cycle.


Ariston and on and on...lol

The water temp thermostat is to blame or the water is not heating.Basically what happens is the washer fills with cold water and starts to wash and heat at the same time.Once the water reaches a certain temperature it moves onto the next stage of the wash program.If the water is not heating or the thermostat is not working the programmer wont get the signal to move on.Hope this helps.

Apr 26, 2010 | Ariston Technologies Dishwashers

1 Answer

DIshwasher wont start, flashes pre-wash and was lights


1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher) 3) Pour powder indo the dishwasher 4) Turn the dishwasher controller to the top position (the 12 o?clock position) ? this is the eco-setting. 5) Press the on/power button on the dishwasher, so that it now turned on (a light will display) 6) Move the dishwasher controller to the ?R? position (it?s on the very left), and leave it there a second or two. 7) Move the dishwasher controller back to the eco-setting (the 12 o?clock position).

Apr 19, 2009 | Ariston Technologies L63SNA Stainless...

1 Answer

My Ariston LI 700 I dishwasher doesn't complete wash cycle


dear customer,

 we recommend u to perform the following checks on ur dishwasher,
  1. Test the timer motor
  2. Test the thermostat
  3. Test the heating element
for more details for self test instructions try the link http://www.acmehowto.com/howto/appliance/dishwasher/dishwasher.php
Plz rate this solution.. thank you.. 

Apr 08, 2009 | Dishwashers

2 Answers

Ariston dishwasher


i have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights

Feb 09, 2009 | Ariston Technologies L63 Free-Standing...

1 Answer

Ariston LL64 error


call 1800 815 589 ariston australia

Jul 06, 2007 | Ariston Technologies LL64WNA Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

2,516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Renee Knafel-Bullock
Renee Knafel-Bullock

Level 2 Expert

233 Answers

Are you an Ariston Technologies Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...