Question about Sony Playstation 3 (PS3) Console

1 Answer

The blue and green light and the fan come on but it keeps saying

The blue and green light come on, the fan comes on, but then the screen just says "NO SIGNAL", sometimes I get it to come on but then it has no volume. Does anybody have a similiar problem? if so what did you do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

This sounds like a cable issue. I would make sure everything is connected correctly/securely and if that doesn't work I would try a new cable. If it isn't the cable you can return it for no cost other than gas.

:)

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power failure


Make, model and OS please.

Feb 25, 2014 | Computers & Internet

2 Answers

My minkaAire/Delano11 will not turn on. The green light is now blue. What does this mean


OKAY I HAVE A POSSIBLE SOLUTION! THERE SHOULD BE A GREEN LIGHT AT THE TOP OF THE REMOTE AND A BLUE LIGHT AT THE BOTTOM. YOU NEED TO TURN OFF THE BOTTOM SWITCH, WHERE THE BLUE LIGHT IS, FOR 5 SECONDS THEN BACK ON. THEN HOLD THE CENTER STOP BUTTON FOR 5 SECONDS AS WELL. THIS WILL ALLOW FAN AND REMOTE TO RESYNCHRONIZE, IF BLUE AND GREEN LIGHTS BLINK TWICE THEN U HAVE SUCCESSFULLY RESET BOTH FAN AND REMOTE. IF THIS DOESN'T WORK CALL MINKA AIRE TECH SUPPORT 1-800-221-7977. GOOD LUCK!

Nov 19, 2013 | Minka Aire Ceiling Fan

1 Answer

Fan noise and blinking blue power light


green=power in motherboard.
blue=stand by.
yellow=memory powerd

Jun 13, 2013 | Gateway GT5622 PC Desktop

1 Answer

Xenius 37" lcd blue light just keeps flashing


my 37" xenius tv started losing its picture to a stripe screen then started flashing red blue green .know wont come on at all .wht part do i need to fix it please

Aug 07, 2012 | Televison & Video

2 Answers

My samsung 61in. Dlp screen flashes green/blue pic is viewable but everything is the two colors, also screen will flash icon check fan #1


You have 2 problems. Problem 1 either you main board or light engine is bad and needs to be replaced. Problem 2 is exactly what your TV says. Fan#1 isn't functioning properly so a heat sencor is being actiated to shut down your set. Make sure all the fans are free of debree and spinning. If one is not spinning, make sure it has voltage going to it. This will let you know if you have a bad fan, or a bad board.

Jun 05, 2012 | Samsung 61" Slim-Depth LED DLP HDTV

2 Answers

Light does not come on in the ceiling fan


"from the ceiling fan we have black, blue, and white. On the mounting bracket is green. We installed black and blue from the fan motor to the black in the ceiling."

If your fan is working and the light isn't and they are tied to the same wire (black wire), then you might have a bad pull chain switch or bulb.

Feb 18, 2010 | Hampton Bay 56 In. Florentine IV, Brushed...

2 Answers

No picture, green light keeps blinking, hear fan go on then off, blinking light changes to red


Count the blinks between the pause, Let me know or call a sony service center if your a novice at tv repair

Apr 24, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Hampton Bay Wiring?


You have two switches right? One for the light and one for the fan? White should be neutral. Green should be ground. Black should be hot from one switch and red should be hot from the other. Hook black to black and blue to red. If you wire blue and black together then one switch will turn on the fan and the light at the same time.

Feb 17, 2009 | Hampton Bay 48670 Flemish Pewter Finish...

1 Answer

Replace exhaust fan with fan & light?


Let's say you originally only had one switch (to operate the fan). And at the fan you have only one black, one white, and one ground (bare or green). You can still put in a fan/light combo. but both the light and the fan will always come on together when you flip the switch. To do this you'd connect the black from the switch to the black AND the blue on the fan and connect the white from the switch to both whites on the fan and connect the ground from the switch to either a green or bare wire on the fan or to a green screw on the fan housing somewhere (whatever is available).

Feb 25, 2008 | Broan-NuTone N-LS100SE Exhaust Fan Exhaust...

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Iron
Iron

Level 3 Expert

3018 Answers

shaun taylor

Level 3 Expert

1497 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...