Question about ASUS P5GZ-MX Motherboard

1 Answer

Mita Kyocera KM1535 with an error code. C710

I have a Mita Kyocera KM1530 with an error code. C710 can someone help with what the error code is.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 848 Answers

C170-Toner sensor/Developer Error
check usual suspects Sensor, Wiring, Developer material, connectors.......

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting a BIOS POST error (87h) from system start to O.S. desktop


If you want to know what this is the error code is related to

Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured or click start type in event viewer press ENTER you might be able work your way through the problem
if you need more help with this post a reply with the error message details so that someone might be able to provide a solution
Hope it helps.

Dec 09, 2012 | Tyan Toledo I3210w S5211g2nr Lga775 Xeon...

2 Answers

I need drivers to install Kyocera FS-1116 MPF multi scan as I have lost the CD


Kyocera FS-1116 MPF Drivers
Visit the above link and download the required drivers for the Operating system you have on your PC
Installation Manual may also be referred.

Hope it helps! Good Luck!
CreativeTECH

Apr 15, 2011 | Motherboards

1 Answer

My dell laptop keeps to going to a blue screen


Hi dianalara071,

You have a problem with something inside your laptop. You really need to post the error code that 0x000********** number for someone to help determine what it's error out on. But my first thought since, it boots and then goes to blue screen is bad memory. Sometimes memory just goes. But, I'm just guessing, I would need the error code to be sure.

Thanks

Mark

Dec 10, 2009 | Dell Motherboards

3 Answers

I am getting three short beeps while booting


The beep codes below may help you identify the possible computer problems. However,
they are only for reference purposes. The situations might differ from case to case.
gAMI BIOS Beep Codes
*Computer gives 1 short beep when system boots successfully.
*Except for beep code 8, these codes are always fatal.
1 beep Refresh failure
2 beeps Parity error
3 beeps Base 64K memory failure
4 beeps Timer not operational
5 beeps Processor error
6 beeps 8042 - gate A20 failure
7 beeps Processor exception interrupt error
8 beeps Display memory read/write failure
9 beeps ROM checksum error
10 beeps CMOS shutdown register read/write error
11 beeps Cache memory bad
g AWARD BIOS Beep Codes
1 short: System boots successfully
2 short: CMOS setting error
1 long 1 short: DRAM or M/B error
1 long 2 short: Monitor or display card error
1 long 3 short: Keyboard error
1 long 9 short: BIOS ROM error
Continuous long beeps: DRAM error
Continuous short beeps: Power error

Nov 03, 2009 | Gigabyte GA-7VKML Motherboard

1 Answer

Bought graphics card upgrade yet will not detect


The board should recognise this card ,however connect card with pc off and reset your cmos jmper hold for few seconds or take battery out,replace boot up get into bios ,normally delete button,reset your time and date and save try reboot

Jan 14, 2009 | ASUS P5VD2-MX SE Motherboard

2 Answers

Have a Abit A17 mother board that posting a 25 or 5D error code


I picked this up from an abit forum, It appears that it is quite common, look here, http://forums.hexus.net/abit-care-hexus/104674-abit-ab9-pro-code-25-error.html

Dec 21, 2008 | Abit A17 Guru Motherboard

1 Answer

Using kyocera to computer


Check if you have documents qued for printing
If so delete all, then retry. unplug printer and turn it off also remove usb cable, restart PC then plug all back in. Re isntall printer then try again. Should workl

Aug 01, 2008 | Motherboards

2 Answers

Kyrocera kx18 cell phone


Unlocking the phone
1. From the home screen, press the left
softkey to select Unlock.
2. Enter your four-digit lock code.
see also this.
http://www.kyocera-wireless.com/kx18-phone/pdf/kx18_jet_user_guide.pdf

Feb 28, 2008 | Intel Motherboard

1 Answer

SOLTEK SL-65K2-CT Motherboard


The beep pattern is a beep code and is how the motherboard communicates errors during the early booting process otherwise known as the POST (Power On Self-Test). List restart the computer and listen for the pattern of short and long beeps. Soltek does not list the beep codes in their manual, instead they refer to Phoenix who manufacturers the AwardBIOS on your motherboard. There are only two POST beep codes; a single long beep followed by two short beeps (Video error) and anything else. Apparently anything else you hear *probably* refers to RAM problems. Since you?ve already tested both one of the remaining options is to install a *POST* card (about $30 to $50), boot the PC and read the hexadecimal error code for a more detailed clue to what failed. If you ask around you might find someone who has one and may be willing to loan it to you. Another option is to write off the motherboard since the cost of the test equipment it about 1/3 the cost of a new board. Let us know if you have any other questions and please don?t forget to rate the posing.

Jan 06, 2007 | Soltek SL-65KV2-T Motherboard

Not finding what you are looking for?
ASUS P5GZ-MX Motherboard Logo

Related Topics:

664 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...