Question about Lexmark X4270 All-In-One InkJet Printer

1 Answer

Printer will no longer work with my vista computer

When I first bought my printer a couple of months ago, it installed and worked well with my vista computer. One day it just stopped. Today I uninstalled the printer and now it will not reinstall. I have tried everything and it still will not work with my computer. What could it be?

Posted by on

  • tcb4al Feb 08, 2009

    I have the same problem. I purchased a new laptop with Vista and installed the Lexmark print drivers. Everything worked well for a while them all of a sudden I can't change my printer settings nor save any changes. The Lexmark printer settings will not relinquish control to Vista.

  • Thomas F. Schneider May 11, 2010

    Disconnected the cable, then try to reinstall?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Lexmark Master
  • 684 Answers

In this case go ahead and download the software from the following Link: http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0 Just go to this Link and select ur Product..... Then Select the Operating System......... Download the drivers from here and install the Printer..... Thanku

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed Windows 7 and my setup disk works only


go to www.hpsupport to get the windows 7 drivers for the printer.

Feb 03, 2010 | Printers & Copiers

2 Answers

Can't define custom paper size on HP2600n after Vista upgrade


Went to HP support web site and found the following info. The HP drivers link will take to their download site If you haven't installed the Vista Print drivers yet.

Our church bought new computers with Vista Busines two years ago and after struggling with it for 6 months went back XP Pro. This was before any Vista service packs had been released so I'm not sure if these issues have improved. We are in no hurry to upgrade to Vista. Some articles I've read about 6 months ago recommended waiting for windows 7. I haven't followed how the release of windows 7 is going. Vista is a VERY DIFFERENT ANIMAL and can be frustrating. Been there and I feel your pain.

hp drivers and downloads

Microsoft support

Oct 16, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Canon ip1980 wont print on my ASUS laptop


Check if the printer services is enabled. Click start, run, enter services.msc and press enter. Look for Print Spooler. Right click and select properties, In the general tab, select automatic as start up type and start the service. See if it works and let me know.

Jan 26, 2009 | Canon PIXMA iP1600 Printer

1 Answer

Install cd in my new computer


You can get the Vista Drivers for your Printer at http://www.brother-usa.com/downloads/Default.aspx?ProductGroupID=5&ProductID=MFC5460CN
You need the Vista drivers and then it should work properly.
Hope this helps. Bud

Jan 01, 2009 | Brother MFC-5460CN All-In-One InkJet...

1 Answer

Hi I have a hp 1317 psc all in unit old yes but it was working well. Couple of days ago computer crashed and had to returned to factory settings. Have tried now for a couple of days to reinstall...


If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Hp PSC Drivers and Software
or click directly here
s.gif gc_w01_ENU.exe, (1/1 , 364.59M)

Awebpage will open, follow instructions, select model, then operativesystem etc.,go to next page twice, find file, and click on download .
Chose to download the file in my documents when asked.
Afterdownloading,findthefile,double click on the file with the mouse, ifyou get introubles,then follow instructions below to reset andreinstall:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website and run the file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:this printer does not work on Vista you can only install it on Windows XP.

Oct 10, 2008 | HP Printers & Copiers

1 Answer

I recently bought a new Gateway computer and when I tried to install my canon printer from the disc, it would not install it for me. I have a Canon Oixma MP210 SERIES printer that I bought three months...


You might want to check Canon's website to see if they provide a downloadable driver that will make your printer Vista compatible. Years ago, I had the same problem with an Epson all-in-one when making the jump from Windows 98 to XP. I was able to download and install a driver from Epson that restored most (but not all) of the device's functions.

Sep 13, 2008 | Printers & Copiers

1 Answer

HP Photosmart C5180 All-in-One


Hi,

Yeah, i assume that since you restore your computer to previous settings, the Software installed in your computer will no longer be there. However, to make your printer work again with windows Vista, you need to download the full feature software and drivers.

Below is the link where you can choose different operating systems, including Vista so that you download the Software.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&cc=us&lc=en&dlc=en&product=1153481

Just copy and paste the link on the address bar, and it will bring you directly to the page where you need to select first your operating system. Afterwards, please make sure that you gonna select the "HP Photosmart Full Feature SOftware and drivers" under Drivers page.

Installing the SW and printer driver is just very easy, just read the Installation Wizard and your good to go!

Please give me feedback regarding the outcome of the steps i mentioned.

Thank you so much

adonscott

Jul 01, 2008 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Hooking up printer


Maybe your USB port or USB cable is not working? For sure you need to get the latest drivers for Vista, Try to download the driver from Lexmark website at http://downloads.lexmark.com/cgi-perl/downloads.cgi?category=Drivers&ccs=229:1:0:552:0:0&searchLang=en&os_group=Windows%20Vista If that still doesn't work, see if you can get another USB device to connect to your computer - like a USB Flash Drive (or "thumb drive").

Sep 03, 2007 | Lexmark Z845 InkJet Printer

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...