Question about Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

1 Answer

Dishwasher Clean light blinks constantly.

The Clean light on my Kenmore Ultrawash Quietguard 4 dishwasher blinks constantly and I can't start a new cycle.

Posted by on

  • Bob Kelley Feb 05, 2009

    I have the same problem and left the breaker off for about 2 hours. This failed to reset the issue. The manual suggests a heater circuit issue. I haven't taken it apart yet but I suspect there is a circuit board issue. Any suggestions????

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Try turning off the power to the dishwasher at the circuit breaker box. leave the power off for 5 10 mins and then turn breaker back on and try to restart dishwasher. This may reset the board and it may work

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kid 60 s10 please give fault codes


Hi Roger, Hope this helps......CHEERS..

KENMORE DISHWASHER ERROR CODES

Kenmore Dishwasher Error Code = Start Resume light blinking slow
When the dishwasher door opens or electrical power is removed during the cycle then the dishwasher will not start again. The door is detected as being closed and the Start Resume button is being pressed
Kenmore Dishwasher Error Code = Clean light is blinking 7 times
Heater circuit fail. Control panel did not detect the water getting hot. Did not detect heating element was energized to heat the water during the wash cycle
Kenmore Dishwasher Error Code = Sanitize LED blinking at end of cycle
Control panel could not detect if sanitation has been achieved
Kenmore Dishwasher Error Code = Console light blinking rapidly
There is a stuck button on the control panel
Kenmore Dishwasher Error Code = Clean light is constantly illuminated
Dishwasher cannot start a wash cycle until it sees that the door has been opened after the previous washing cycle
Kenmore Dishwasher Error Code = Control lock LED is ON but not responding to pressing of the keys
Turned on by accident or there is a control detected key pad problem

Mar 31, 2016 | Kenmore Dishwashers

1 Answer

Hello, i have a Kenmore Quietguard standard dishwasher. it is in the "lock" position under dry options and the dishwasher will not start. can you tell me how i might be able to re-start this?


On our Kenmore Quietguard the lock light is at the Air Dry button. Holding the Air Dry button for about 8 seconds turns the lock light off if it is on and on if it is off.

Jan 04, 2010 | Kenmore Dishwashers

1 Answer

Kenmore Ultrawash Quietguard Deluxe Problem


kenmore washers nothing but problems, my washer says clean and will not do any cycles...... less that 2 years old

Oct 21, 2009 | Kenmore Dishwashers

1 Answer

Clean light blinks constantly



press heated dry
press normal wash
press heated dry again
press normal wash again..........
.....wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Hope this helps, it worked for me, but it may depend on your model.

Feb 05, 2009 | Kenmore Dishwashers

5 Answers

Kenmore Ultrawash QuietGuard 3 Dishwasher not draining or rinsing


Not draining may either need new drain motor. or something is blocking the drain pipe.

Spots on dishes means you are using to much detergent or the wrong kind of detergent.

Your owners manuel should tell you what type to use.

Nov 18, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Kenmore Ultrawash QuietGuard 3 Dishwasher not draining or rinsing


Hi Claire,
Are you using rinse aid?
that may help with the film.you may also have stuff down in the trap causing the water to drain slow.

Nov 05, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Kenmore Quietguard Plus/Ultrawash - Kenmore


drain hose may be partially clogged or kinked up. ensure that the hose is not bent up thus restricting the flow of water out.

Nov 26, 2007 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

Kenmore Dishwasher Problems


Just for the degergent item.....The Sears repairman told me to not use the gel type detergent but only use cascade complete and to use very little of it..

Oct 19, 2007 | Kenmore 24 in. 16182 / 16189 Built-in...

Not finding what you are looking for?
Kenmore 16602 / 16604 / 16609 Built-in Dishwasher Logo

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Fred Sops

Level 2 Expert

272 Answers

Cindy Wells

Level 3 Expert

4954 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...