- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
From what I can gather it seems like a power source error (red wires attached to the transformer) is allowing it to keep running. Another possibility is it could be your speed tap. These are my speculations about what is occurring.
An owners manual will only tell you when to and not to operate the out door ac. And give you some maintenance tips.
A technical manual will have a wire diagram maybe a mollier diagram or other diagram for recommended pressures and temperatures and maybe some trouble shooting tips (but not likely) on things like checking power in and thermostat settings.
If you need anything in particular please be specific about your trouble and post it. If you post back with more trouble I'll try to help you more.
If this helps you please rate me as high as possible. Thank you for using fix ya and GOOD LUCK!
Goodman's control boards are very sensitive as well as the connections to the gas valves. Check the wires and make sure they are snug and tight. With it being only 2 months old, I doubt the board is bad or the flame sensor(unless it is a used system). So I would just snug and wiggle the wires on the board and the gas valve and try that.