Question about RCA RCU800 Remote Control

Open Question

Need the remote code for Panasonic DMR-ES45V DVD/VCR Combo

Have an RCA RCU800 and a similar GE Universal Remote, and no codes are listed for the PANASONIC DVD VCR COMBO. Panasonic said only their remote will work with the unit but I am not convinced yet. Had anyone out there found a universal remote and a code that works???

Posted by on

5 Suggested Answers

  • 1694 Answers

SOURCE: entering code for replacement remote

www.remotecodelist.com ...........................................T.

Posted on Mar 22, 2008

  • 71 Answers

SOURCE: rca universal remote RCU300TMS

Here is your manual.

http://66.77.167.109/rcaaccessories/docs/man/RCU300T_DOC_OM.PDF

If you want to find the code for your TV, use the automatic code search function on page 8.

Hope it helps!

Posted on Oct 13, 2008

SOURCE: I have a Manavox TV/DVD/VCR

First of all, make sure you have good batteries in the original remote(I have seen brand new batteries be bad) and make sure that the connections are clean. Then make sure that the remote is in TV mode and see if it will work your TV. If there are no codes for your TV that came with the RCA remote, you will need one that does, or you will need to replace the original remote. I have seen a lot of times where universal remotes will not work combo units at all, no matter if there are codes listed or not.

Posted on Jan 10, 2009

  • 2 Answers

SOURCE: I need a code for a universal remote

Here is the link I just found the manual on for this remote control, which I needed the codes for myself: http://safemanuals.com/brand-user-guide-instructions-owner-manual/RCA go there type in the remote model RCR450 enter, click on the link that comes up and download the Manual in PDF form.

OR:

1: Turn on the device you want to program ex: the TV

2:hold the button for the device you need to program in ex:TV
while holding down TV button hold down ON/OFF at the same time for 3 secs and the light should turn on and stay on.

3:click the ON/OFF button until the TV finally turns off may take many times but as long as the light stays on when your not pushing a button you still have codes to go through.

4:press the stop button and the device is programmed into the remote.

Posted on Apr 14, 2009

MNfisherman
  • 11896 Answers

SOURCE: Cannot find remote code for panasonic TV/VCR combo for RCA remote

Here is a list of codes for your remote. Please follow any of the links below to get your codes.
Results 1 - 10 of about 324,000 for rca universal remote codes. (0.26 seconds)
Search Results

  1. RCA Universal Remote Control-Programming Codes RCA Universal Remote Control-Programming Codes. ... The remote may already be set up to operate your brand of TV, VCR, or Cable Box. ...
    www.thompsontv.com/rcarc.html - 33k - Cached - Similar pages -
  2. How to Program an RCA Universal Remote Without a "Code Search ... wikiHow article about How to Program an RCA Universal Remote Without a.
    www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button - 42k - Cached - Similar pages -
  3. Universal Remote Control Codes Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For All and more.
    www.xdiv.com/remotes/ - 73k - Cached - Similar pages -

Posted on May 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the code for a Panasonic tv/dvd/vhs combo.....


New 3 digit codes for DVD/VCR, DVR/SAT, TV/VCR, TV ...

www.eliztech.com/remotes/ge-new-3digit-combo-codes.php
DVD/VCR, DVR/SAT, TV/VCR, TV/DVD, DVR/CABLE and DVR/DVD combo codes for GE/Jasco three digit universal remote controls purchased after ... 3 digit codes for GE Universal remotes purchased after August 2002 ... PANASONIC, 437.

[PDF]Manufacture Code List

https://www.att.com/support_media/images/.../set-up-code-list.pdf

AT&TDVD VCR COMBO. VCR. HTIB. REC TUN. AMPLIFIER. TV. Abex 1098. Admiral ....Panasonic 1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289,. 1292 ...

Remote Control Program Codes - FTC - Farmerstel.com


Jan 01, 2016 | Panasonic Televison & Video

Tip

One For All TV VCR DVD Combo Codes for URC Universal Remote Controls These are...


One For All TV VCR DVD Combo Codes
for URC Universal Remote Controls

These are all the TV/VCR Combo codes for the One for All Remote Control:

America Action 0278
Audiovox 0278
Broksonic 0479, 1479
Citizen 1278
Colt 0072
Curtis Mathes 1035
Daewoo 1278
Emerson 0479, 1479, 1278
Funai 0000
GE 0240, 1035, 0807, 1060
GoldStar 1237
Harley Davidson 0000
Hitachi 0000
Lloyd’s 0000
Magnasonic 1278
Magnavox 0000, 1781
Magnin 0240
Memorex 0162, 1237
MGA 0240
Mitsubishi 0807
Optimus 0162
Orion 1479, 0479
Panasonic 0162, 1035
Penney 0240, 1035, 1237
Quasar 0162, 1035
RadioShack 0000
RCA 0240, 0807, 1060, 1035
Samsung 1014
Sansui 0000, 1479, 0479
Sanyo 0240
Sears 0000, 1237
Sony 0000, 1232
Sylvania 1781
Symphonic 0000
Thomas 0000
Toshiba 1145, 0845
Zenith 0000, 1479, 0479


To program the VCR / DVD combo codes for the URC-3021 follow these steps:

  1. Turn on your TV.
  2. On the remote, press the TV key once.
  3. Press and hold SET until the LED blinks twice, then release SET.
  4. Enter the first four-digit code from the previous list.The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
  5. Aim the remote at the TV and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.
Repeat these steps using the same code for the VCR or DVD button.

If that doesn't work, use the auto-search function.

I hope that helps.

on Apr 11, 2010 | Televison & Video

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Televison & Video

1 Answer

Have philips univerasal remote need codes for my panasonic dmr-ez28 dvd recorder


Panasonic DMR-ES30VS DVD Recorder/VCR Universal ...

www.fixya.com > ... > Panasonic DMR-ES30VS DVD Recorder/VCR
Panasonic DMR-ES30VS DVD Recorder/VCR, universal remote related issues. Getfree help ... My remote does not work anymore. what is the code for a universal remote? Thanks in ... Question about Philips DVD & Blu-Ray Players ... How do I getremote code for GE universal remote control Need remote code? How to ...

Philips Magnavox MWR20V6 DVD Recorder/VCR Remote ...

www.fixya.com > ... > Philips Magnavox MWR20V6 DVD Recorder/VCR

Dec 20, 2015 | Panasonic Televison & Video

3 Answers

I need a code for a RCA RCR6473R remote to program for my magnavox sdtv tuner


i need the codes for rca rcr6473r i have a go.video vcr dvd combo...

Jul 17, 2012 | RCA Universal Remote Control

1 Answer

I have an RCA universal remote control CGEU401 and have successfully programmed the sony TV. However I have been unable to do so for the Nexxtech VCR/DVD combo model 1619001. I have tried code searc


If there is no setup code in the code list of the remote to serup your Nextec VCR/DVD with RCA universal remote, the remote cant be set to that device. That is all.

Apr 15, 2012 | Televison & Video

1 Answer

Programming EUR7724KCO Panasonic Universal Remote Control


To program the remote, press and hold the TV button. Then enter the 2 digit code from the code list. The EUR7724KC0 will only control TVs from about 17 manufacturers that were manufactured before the remote was programmed. If the given code for the TV brand doesn't work or the manufacturer isn't listed, then the remote can't control that TV. I'll list a few of the codes (see the manual, link below, for more):
Panasonic 01, 02
RCA 03
Samsung 14

The EUR7724KC0 remote came with several devices including the PV-D4734S DVD/VCR. The directions for programming the TV code are on page 28 of that manual. The code list is on page 29. This manual is available from Panasonic here: http://service.us.panasonic.com/OPERMANPDF/PVD4734S.pdf . Since this particular DVD/VCR model was listed at Amazon in 2004, it probably won't work for TVs built in that year or later.

I hope this helps.

Cindy Wells

Feb 04, 2012 | Universal Remote Control Televison & Video

2 Answers

Remote codes for Panasonic MODEL# PV-DF2704


5 digit code for the comcast red button silver remote is 21462 this pertains to Panasonic MODEL# PV-DF2704

Nov 20, 2011 | Panasonic PV-DF2703 Triple Play 27 in....

1 Answer

Panasonic DMR-ES45V - DVD recorder / VCR combo Remote not workin


My remote is not working. When I press a button, I get the following message on my unit: U12, U30, SET #, CHK REMOTE #, or RC #. What can I do to fix this? The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.

Jun 04, 2009 | Panasonic DMR-ES46VS DVD Recorder/VCR

Not finding what you are looking for?
RCA RCU800 Remote Control Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73150 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...