Question about RCA HD52W59 HDTV Projection Television

1 Answer

My problem is that the picture in the screen is out of focus.

The center of the screen is in focus, but the edges are out of focus. It is kind of like a "Boe Tie" affect. The center of the screen is squeezed in and the ends are puffed out kind of like a bow tie. The center is in focus and the ends are out of focus.

Posted by on

  • Trouble Feb 05, 2009

    The only thing in focus is the center. From center to edges the picuture is out of focus. The farther you go from the center, the worse the words on the screen get. The words are doubled, in different colors. We did the auto convergence and that did not help.

  • Willie Howell May 11, 2010

    do you have a 3d effect. if you do you might have a convergence problem. check to see if you have the convergence option in the setup menu if you dont you may have the fl231 fuse problem

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I´m changed the canon to TV projection the green and is go out the convergencia above and
side right I don´t know how iter in the menu inter could you tell me how it these. thank you..

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find object in dark. Though the camera should identify (may be red ray focus) the object to take snap. In manually I set up all the possible way but in vain. Could you pls. give me a set up...


Yes, the camera does attempt to illuminate the area to allow autofocus, but the darker it is, the harder it is for autofocus to work. This is a problem even with high-end SLRs.
Usually the center focus point is the strongest and focusing works best when there is a strong vertical line.

There isn't a complete solution, but you there are a couple of work-arounds If you have a camera with manual focus, then use manual focus Point the center focus point on an edge, depress the shutter button 1/2 way to focus, then re-frame the picture.

Mar 03, 2011 | Cameras

Tip

Kitchen table, Screen (G2) voltage adjustment, Course 101


Well, those of you who have no idea why a Screen Voltage (technically known as G2) adjustment may interest you, here is a photo of a bad adjustment (too high).

8914ffc.jpg

You may also experience smeared colors… this is caused by a low adjustment. To correct this, we need to get the back off of the TV. It would be a good time to unplug it if you have not already done so. Next we locate the FBT (Fly-Back Transformer).

be30da0.jpg

This is a 20” model and it has 2 knobs. Your FBT may vary, as some slim designs and some large tube models may have 3 knobs.

You will need to look closely at the knobs; they will be labeled “Focus” or “Screen”. On units with 3 knobs, there will be 2 focus knobs and 1 screen. For now, we will be working with at the Screen knob only.

0007e62.jpg
d784a76.jpg
With the adjustments identified, we are ready to plug the TV in (including your standard cable connection) and turn it on… BECARFUL!!! For the rest of this adjustment, we will be working inside of an electrically charged TV. We also need to normalize the picture, so go into your TV menu and adjust the Picture and Brightness settings to the middle or center.

If your TV normally displays a black screen when you do not have a signal connected, ex: Video input 1, then this will be the quickest and easiest setup for you to use. However, if you are not so lucky, you may need to bust through your DVD video collection and find a “between scenes” shot that you can pause on to give you as black of a picture as possible. Eliminate as much light in the room as you can (just remember, you still need to see what your doing)… we want a good view of the screen without the interference of ambient lighting.

Once you have your black screen all set, we are now ready to proceed to the adjustment. If you have lines on the screen, see (HIGH)… if you have color smear, see (LOW).

HIGH: If you have some lines in the picture with a washed out appearance, your Screen voltage is too high. You will need to turn the Screen knob on the FBT counter-clockwise. Do this slowly, until the lines are no longer visible. If you still have a small amount of illumination coming from the screen, back it down a touch further until this just disappears.

LOW: If you have smeared colors in the picture that seem to trail of the edges, your Screen voltage is too low. You will need to turn the Screen knob on the FBT clockwise. Do this slowly, until you just see some lines zigzagging top to bottom on the screen. Now, you will need to turn the Screen knob on the FBT counter-clockwise. Do this slowly, until the lines are no longer visible. If you still have a small amount of illumination coming from the screen, back it down a touch further until this just disappears.

The final set, switch the TV input over to your cable input and check out the picture. Take a good look at some bright scenes and dark scenes. Do they look ok? Adjust the Picture and Brightness in your menu… can you set the picture to your liking? If so, you are all set. If not, double check your work (remember to normalize the Picture and Brightness setting).

feab016.jpg

If you are unable to adjust the Screen voltage as described above, you may have a High Voltage problem with your TV. This will require a repair and is not covered by this tutorial.

If you are all set and the adjustment is good, we should have a quick look at the focus adjustment. Return the TV to your Black screen setup. Press the TV menu button to give you nice fixed display to focus. Adjust the focus knob(s) until you have the clearest picture. It’s important to balance the center of the picture with the corners of the picture. If the center is too sharp and the edges and corners are blurry, it is not a good adjustment. Do your best, you are the final judge of your work here.

35fa2ea.jpg

Once you have finished the adjustments and verified the picture with your cable picture, you are ready to close it up and return the TV to normal service. Unplug the TV, replace the back cover… enjoy!

I hope this was helpful. If you benefit from this tutorial, please leave some feedback.

on Mar 21, 2010 | Televison & Video

1 Answer

I cannot see football stats on bottom of screen. mitsubishi wd-62627 setting is hdmi 1080i standard. help!


either your TV or your cable/sat box(if any) is on zoom(enlarging pix). Look for buttons on both remotes that might say picture size or aspect something like that...Pressing these buttons usually cycle thru 3 or 4 size options. When in zoom center of screen is the focus and outer edges of pic are cut off.

Sep 11, 2010 | Mitsubishi WD62627 62" HDTV

1 Answer

Picture is off center. Bottom edge is about


sounds like VERTICLE problems...check verticle circuit for bad Capacitor...bad cap might be visible...you must locate verticle ckt inside of TV and change BAD cap!!!

May 19, 2010 | Samsung HLN4365W 43" Rear Projection...

1 Answer

Hi, I have a issue with the quality of the pictures I've taken recently on my Z2, the pictures a blurry around the edges. The centre of the photo is sharp. Do you have any suggestions please of what to do,...


This is due to settings change
Please switch the focus mode to multi point focus or any other
current setting will be center focus or spot focus that is why only the center is focused and the rest is blurry
Please refer to your fuji manual for instructions on how to change the focus mode

Thanx and i hope this solves your problem
Please dont forget to rate this information

Jul 17, 2009 | Fuji FinePix Z2 Digital Camera

1 Answer

Hitachi 60V500A Cracked Screen Replacement


You have probably reversed the inner screen (Fresnel Lens) when you reassymbled the screen. It will give you the same effect.
Hope this helps,
Skyassy

Jul 04, 2009 | Televison & Video

1 Answer

Mitsubishi 55" 1080HD


it sounds as though your convergence board is going out or gone out

Oct 23, 2008 | Mitsubishi WS-55613 55" Rear Projection...

1 Answer

Yellowing screen off-center - not a convergence issue


You might want to try the optic lens adjustment screw on the side of each crt. Mark them before moving.

May 30, 2007 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Horizontal hour glass picture


The convergence Ics need replaced. In Hitachi, resistors and sometimes a coil needs replaced as well. The convergence/deflection PCB is available, but, the cost of that board is higher than having a servicer come to your home and repair the unit to component level. If you are not familar with this circuit, then call a servicer. Have them replace both ICs not just one. Make sure they are repairing to component level and not replacing the board. Hope this helps.

Dec 16, 2006 | Hitachi 43FWX20B 43" Rear Projection...

1 Answer

Out of focus monitor - 955DF


Edge-focus is notoriously tricky on flat-screen picture tubes. I have not found anything on adjusting the focus for this model. it seems to be a common problem, though it seems to be more of a sample-defect problem rather than a poor design; a replacement should be OK.

Apr 04, 2006 | Samsung SyncMaster 955 DF 19" CRT Monitor

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...