Question about ViewSonic VA702b 17" LCD Monitor

1 Answer

Im using my LCD tv as my monitor, its keeps flashing, help

Im using my palsonic LCD tv as my monitor for my APUS gaming computer (NVIDIA 9800 graphics card) and my tv turns the screen off then back on and repeats. some times it doesnt happen for hours, some times its every 2 seconds.

im using the normal PC plug on the back of the tv.

any ideas???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 57 Answers

The main problem with using a tv is the resolution you wont get the same output as you would if you used and lcd monitor, to high of a resolution and the tv wont show a picture or will cut in and out due to it not being suported by the tv , try using the pc on a output setting of 800 x 600 or 1024 x 768 and see if it does it,then if it doesnt then its your tv! try the 800 x 600 first as most tvs will support this with a vga slot in the back.

if this still happens after changing the res you might want to make sure that ur NVIDIA 9800 graphics card is working correctly and have the right drivers installed, make sure its not over heating and the card has room to breath inside the pc if your not sure try leaving both side panals of from the pc to see if its heat

Good Luck

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a acer x163w 13" monitor and I am trying to play call of duty 2 but keep getting the input not supported. How could I fix this problem so that I may play this game?


Call of Duty 2 Minimum System Requirements
3D hardware accelerator card required - 100% DirectX 9.0c compatible 64MB hardware accelerator video card and the latest drivers*
English version of Microsoft Windows 2000/XP
Pentium IV 1.4GHz or AMD Athlon XP 1700+ processor or higher
256MB RAM (512MB RAM recommended)
100% DirectX 9.0c compatible 16-bit sound card and latest drivers
100% Windows 2000/XP compatible mouse, keyboard and latest drivers
4.0GB of uncompressed free hard disk space (plus 600MB for Windows 2000/XP swap file)
8x speed CD-ROM or 2x DVD-ROM drive

Multi-player Requirements
Internet (TCP/IP) and LAN (TCP/IP) play supported
Internet play requires broadband connection and latest drivers
LAN play requires network interface card and latest drivers

Supported Chipsets
ATI Radeon 8500
ATI Radeon 9000
ATI Radeon 9200
ATI Radeon 9500
ATI Radeon 9600
ATI Radeon 9700
ATI Radeon 9800
ATI Radeon X300
ATI Radeon X550
ATI Radeon X600
ATI Radeon X700
ATI Radeon X800
ATI Radeon X850
nVidia GeForce 2 Ultra
All nVidia GeForce 3/Ti Series
All nVidia GeForce 4/Ti Series
All nVidia GeForce FX Series
All nVidia GeForce 6 Series
**Recommend nVidia GeForce 7 Series or higher

Do your PC support the above hardware requirements?
The most common input no support would be your graphic card is not up to the mark to play the PC games.

Is your graphics card drivers up to date to the latest?
Have you updated your DirectX to the latest version?

Hope it helps.

Apr 17, 2011 | Acer X193W LCD Monitor

1 Answer

I go to screen resolution but the thing is the resolution is greyed out. please help Acer X193w


You need to install the latest drivers for your graphics card, so your computer can run at a higher resolution.

Nvidia Graphics Driver for Nvidia made Graphics Card.

AMD Graphics Driver for AMD Radeon made Graphics Card.

Select your Graphics Card model and Operating System.

Download and install.

Note: Only use the drivers provided for your make and model of graphics card!!!

Thanking you
damnor01

Feb 02, 2011 | Acer X193W LCD Monitor

1 Answer

I use my computer mainly for graphics. They are


Hi

I assume you have tried right click on desktop, go to properties, settings and experiment with desktop settings.

Cheers cbacer

Aug 11, 2009 | Acer 22" X223w LCD Monitor

1 Answer

Desk top orientation


i think ur moniter roated.if not work u can take other way.As click right mouse then click on graphic. tick on enablerotation and fixed 0 deg.2/clk right mouse then click property--apparance... advance...select card...select o degree normal mode

Jun 10, 2009 | Videoseven V7 E17PS 17" LCD Monitor

2 Answers

SyncMaster 2253BW LCD Monitor doesn't fill screen in game's


you can change the size of the screen by going to the set up screen (menu) then adjusting the third box down the coarse and fine and the verticle and horizontal positions my settings are course 1798 fine 48 h position 56 v positiion 50 hope this helps regards Jim

Feb 14, 2009 | Samsung SyncMaster 2253BW LCD Monitor

1 Answer

I cant able to install my SAmsung 19'Monitor Wide.Its gresults VGA card failure


It sounds like you are having a problem with your VGA Card (Video Graphics Adapter) and not with your monitor. Most monitors do not need to be "installed"
Go into your Device Manager and see if there are any items that have exclamation marks next to them. If there are, those are problem areas. Under Display Adapters there should be a specific item (Intel 845G, nVidia GeForce 9800 GT, Radeon 4850, etc.) and under Monitor should be "plug and play monitor".

Dec 08, 2008 | Samsung SyncMaster 920N 19" LCD Monitor

2 Answers

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.
You have failed to specify wheather or not your LCD Display is under Warrenty.

Perhaps these simple trouble shooting procedures will get the job done.

1. use the DVI to VGA adaptor that came with your card

Plug in a regular CRT monitor to the Primary Display Output Port using the DVI to VGA adaptor
( either port can be designated as the primary by you )
I like to use the Port nearest to the motherboard as the Primary

2. plug in the your LCD monitor on Secondary Display port using your DVI cable

At this point you should be able to see your desktop on the Primary CRT Display

3. Go to the display properties and use the Nvidia Dual Display Setup Wizard

set both desktops to CLONED at a resolution of 1024x768 and set the refresh to 60Hz
which is default for most LCD displays , some have higher refresh rates , consult your user manuel

If the display resolution and refresh are set incorrectly for your CRT or LCD you will see
Signal Out of Range ( if the display has the ability to display that error message )

At this stage both displays should be showing a Windows Desktop

If you now see your desktop on both displays , you can now put the LCD on the Primary Port



No Signal Detected ( this means the display device is not receiving a signal )

If your LCD display is still displaying the error message
"No Signal Detected" after performing the trouble shooting proceedures
You may need to read the user manuel about how to enable DVI signal input.

If you are certan you have done everything correctly but still see only "No Signal Detected"

Your LCD Display may need replacement

Loch Hime :-)

Sep 14, 2008 | BenQ FP71E 17" LCD Monitor

2 Answers

Monitor resolution


when you increase considerable resolution windows will ask you do you want to keep these settings? you select yes then that will be saved

Feb 15, 2008 | ViewSonic VX2235WM Monitor

1 Answer

Screen flashes when using dvi input


make sure the cables are tight if they are i would look at replacing the video card.

Feb 06, 2008 | ViewSonic VA2012WB Monitor

Not finding what you are looking for?
ViewSonic VA702b 17" LCD Monitor Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Cindy Wells

Level 3 Expert

4801 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...