- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It seems Canon A95 camera got ccd imager chip problem that is why you do not get live view in camera mode to take fresh pictures but camera shows old pictures in playback mode. Let me know if this diagnosis is correct to proceed further.
You should have a pic review when the canera is powered on. Some cameras have a review only power switch that allows the screen to view pic s but not turn on the camera. there should be a delete button that once you are reviewing your photos you can delet one at a time or it will say "delete all" click delete all and enter to delete all. if you can find no review or delete buttons they will be in the main menu. Good luck!!
Copy the existing photos on to your PC, switch off the camera. Remove the SD card and format the SD-card using a SD-card reader, this will clear all the card contents. Now try using it in your Camera again. Ideally, you should be able to save photos on this SD card. Other way would be to insert another SD card into your camera and click photos and check whether those photos are being saved into the SD card(this can be done using display option in your digicam.)
does this camera have a round keypad on the back? if so when you go to look at your pictures push the button up, or ,down, left or right. on my sony I push the round menu pad up while looking at pics and that displays all the pics
Playing Back images/Video Clips on TV
You can also playback your images on a TV screen. Before connecting to any device, make sure to
select NTSC/PAL system to match the video output system of the video equipment you are going to
connect to Vivicam 5340s, then turn all connected devices off.
1. Position Vivicam 5340s on the cradle.
2. Match the docking connectors and carefully insert Vivicam 5340s
until it fits in place.
3. Connect one end of the A/V cable to the A/V terminal of the
4. Connect the other end to the A/V input socket of the TV set.
5. Turn the TV and Vivicam 5340s on.
6. Playback the still images/video clips.
The method of operation is the same as playing back still
images and video clips on Vivicam 5340s.
I hope this helps:)
Chech the manual to see if there is a sequence control. Or how the button load images.
For example taking a typical example[any camera]
The left right button will advance one image or back one image at a time.
But the up down button will advance them in blocks of ten[or 5 or 20] according the to camera model.
But if it does seem that a button is stuck on
This 'button' may not the the mechanical button you push but an electronic one.
Run the through the manual and if still not getting any joy contact the customer support at Canoon