Question about Lexmark X4270 All-In-One InkJet Printer

1 Answer

Printer 4270 prints only a partial page and then stops

I am trying to use my Lexmark 4270 with Windows Vista and have downloaded the required Vista software. The printer will print approximately 2/3 of a document page (of a one page document) and then stops. There is apparently no problem with the drive mechanisms because I can copy a full page document.
I never had this problem when using the printer with my old XP computer.

Posted by on

  • Thomas F. Schneider May 11, 2010


    mportant NewsAttention Windows Vista Users: Attention Windows Vista Users
    If you have installed your printer on your PC using an original Lexmark Driver CD that came with your product and you are experiencing problems when printing, you may have installed the Windows XP driver.

    Follow these steps to resolve:
    · Disconnect your USB cable from your printer.
    · Uninstall all Lexmark printer drivers on your PC.
    · Download the correct Vista driver for your model.
    · Install the driver on your PC.

    Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.

    http://downloads.lexmark.com/perl/downlo...



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks for the help. I followed your recommendation of uninstalling the Lexmark program and reinstalling it. Note that I had done this previously and still had the problem. However, following your advice, the third time must have been a charm. The problem has been solved.

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ERROR 1208 LEXMARK 4270 LOST MY MAN. WHAT DOES THIS MEAN. WILL NOT PRINT HELP!!!!!!


Important News Attention Windows Vista Users: Attention Windows Vista Users
If you have installed your printer on your PC using an original Lexmark Driver CD that came with your product and you are experiencing problems when printing, you may have installed the Windows XP driver.

Follow these steps to resolve:
· Disconnect your USB cable from your printer.
· Uninstall all Lexmark printer drivers on your PC.
· Download the correct Vista driver for your model.
· Install the driver on your PC.

Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.

Dec 16, 2008 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Have no install disk for lexmark 4270 Home office All in one with fax and need some halp installing


Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Nov 07, 2008 | Printers & Copiers

1 Answer

Lexmark 4270 will not install


I believe this will fix it for you as it did for me. I have a Lenovo laptop that updated from XP to Vista and the Lexmark 4200 X4270 All in One Printer would not print or scan. I had to do the following:
1. Delete all printers in control panel.
2. Do full update with Vista install disk
3. Make sure cable to Lexmark is not attached to Laptop until Vista does full update
4. Download the updated Lexmark Driver for whichever version of Windows you are running from the link provided below.
5.Install item in #4
6. Plug in cable to Lexmark and put the Lexmark SW installation disk in and it should finish itself for you.

Link:
http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_1019285789_0_en,00.html

Apr 15, 2008 | Lexmark X4270 All-In-One InkJet Printer

2 Answers

All-In-One X4270 Not Printing


Windows vista is a brand new OS and many printer manufacturers have had to produce new drivers to run on these OS. I would visit lexmark website and download the new driver fo your printer and OS (vista).

Feb 14, 2008 | Lexmark X4270 All-In-One InkJet Printer

2 Answers

Lexmark 4270 printer


Hey,

yes you can download the driver for your printer from the lexmark website
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

Enter x427 into the search field and select the lexmark x4270 when the search suggests it.

After this select the vista from the list of systems and download and install the drivers.


Let me know if you need anything elsde.


Thanks,
Ekse

Dec 11, 2007 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Cannot print using Lexmark Z816


Buy an iMac, it's 200% more compatible than with Vista

Sep 03, 2007 | Lexmark Z816 InkJet Printer

4 Answers

Need help on my lexmark x 4270


Fax does not require installation on the PC. Driver for Vista is here: http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0

Aug 29, 2007 | Lexmark X4270 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...