I HAVE THOMSON DPL580HT AND WHEN I PUT HIM AC/220V IN TO THE POWER(ELECTRIC) ON THE STANDBY MODE-LITTLE FLAS (RED COLOR)SHINE-THE ON/ECO BUTTON.THEN I PRESS PRESET(DOWN)BUTTON AND CLOCK START TO FLASHING ABOUT 3,4,5 SECONDS.IT SHOW :06 AND MOVE 3-4 TIMES AND THEN SHUT DOWN(OFF).JUST STENDBY FLASH KEEP WORK.WHEN I PRESS PRESET BUTTON I CAN HERE KLIK*KLAK LIKE AC/POWER TURN ON,YOU NOW TIK-TAK!BELEVE ME I WILL NEVER WRITE THIS LONG LETTER BUT I IN THE SERBIA AND WE DON'T HAVE SERVICE FOR THIS THINGS.ANITHING YOU CAN TELL ME IS BIG HELP-SO THENK'S(TO ALL OF YOU)WHO CAN AND WISH,UNDERSTAND MY ENGLISH AND WANT&CAN HELP ME!!!!THANK'S TO ALL-DJORDJE
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Its very simple to remove that red light glowing on the AC, just switch-off your AC with your remote, but don't turn off the switch that resides with in the plug, remove filters wash gently and dry under shade and place them again in the AC, now keep it without turning-off the switch for 30-60minutes this is called stand by mode. Now take the remote open the panel and press the button that is situated in 4th row and 3rd column. By doing this the red light will be turned off and enjoy your AC.
With the Wii system, when you hit the power button, it goes into Standby mode. That is the yellow light. In standby mode, the system draws a little bit of power, and it will go into a ready to play state faster than when Off. Holding the power button FULLY powers off the Wii system, and that will give you the red light. Hope this helps!
you probably have a fault on the stand by power board. this normally requires soldering and maybe some componet changes. This is not a job for the unskilled. best carried out by a service engineer(shock hazard) there is a service kit for this available from tvs-services.com 012453925
Does your Thomson DTi6300 fail to power on normally and displays a solid amber light?
During the past few days we have been made aware of an issue affecting a number of our customers with a Thomson DTi6300 box. Customers have been experiencing problems with their box failing to come out of standby mode and typically showing a constant amber light on the front panel.
This fault is due to a broadcast issue which has led to a corrupt file being loaded onto the hard disk. Only Thomson DTi6300 boxes have been affected. If you have been experiencing problems of this nature first of all try switching your box off at the wall and leave for twenty seconds. If this does not work, please try the following procedure.
Please note this will unfortunately cause recordings in your programme library to be lost which we?re very sorry about. You may have to try this procedure a few times in order to resolve the issue as it requires complete attention and precise timing.
1.Disconnect the power supply from the unit by removing the power cable from the back of the box. 2.Wait 20 seconds and then put the power cable back in while pressing the 'standby/power on' buttonrepeatedly on the front panel of the box. 3.Release the standby button as soon as you see a light flash on the front of your box and thenimmediately press the arrow buttons on the front panel quickly and in the following sequence:Up, Down, Left, Right (please note this is not the order the arrow buttons appear on the box). 4.Your box should then show the amber light with the green light flashing until the disk re-format has been completed which will take around 60 seconds. The box should return to a solid red light (standby) automatically. If after 2 minutes your box still does not display a solid red light, please repeat steps 1-4. 5.When you return to the TV GUIDE screen, you will now need to scan for channels to restore your Top Up TV channel logos. To do this, please select Option 4 (set-up) from the Main Menu, followed by option 1 (scan for channels). 6.IMPORTANT: Once you have completed your channel scan, you will need to select option 5 from the Main Menu (Choose your channels) to re-select all those channel providers you would like Top Up TV to download shows from.
We?re really sorry if you have been affected by this issue and greatly regret any inconvenience this may have caused.
Your problem is in the switch mode power supply or the horizontal out circut.
sometimes the small CHOKE that feeds the base of the horz. out transistor has a cold solder joint.
resolder both ends first.