Question about Proform 575 Crosstrainer Treadmill

2 Answers

Spacesaver 500 proformer

My treadmill seems as though it is not getting power. as nothing comes on. also where can I get user manual pro

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I suspect that the problem you are having is the problem I had when I purchased and assembled my Crosswalk 570. There was no power getting to the display, because there was no power getting to the circuit board. Following the manuals instructions (provided to you from the last person who posted) on page 22. The instructions are located in "The displays of the console do not function properly". Follow the steps on removing the motor hood. Now, verify that the AC neut is actually plugged in. If it is, MAKING SURE THE POWER CORD IS DISCONNECTED, check the rest of the connections. If you know how, get a multi-meter and physically check voltages with the power cord connected and the surge switch in the reset position. If you have voltage getting to the card, but no voltage leaving the card, then the card is probably bad and needs replaced. I hope this helps some. Remember, safety first; electricity can kill so be very careful.

Posted on Jun 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

User manuals are here http://www.iconservice.com/manuals.html

But with no display the troubleshooting may be difficult. I would venture that it is the console control board, but this is just a suggestion. Hope this helps
www.twincityrepair.com

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pro form 320x treadmill stops working when you get on it


How can I get my Proform 320X treadmill from stopping a ...

www.shopyourway.com > Manage My Life > Questions
How can I get my Proform 320X treadmill from stopping a few seconds after starting? ... -why-does-my-proform-treadmill-belt-only-move-a-few-seconds-stops

ProForm Treadmill 320x User's Guide ' ManualsOnline.com

fitness.manualsonline.com > ... > ProForm Treadmill
ProForm 320x Treadmill User Manual. Page 1. Page 2. Page 3. Page 4. Page 5. Page 6. Page 7. Page 8. Page 9. Page 10. Page 11. Page 12. Page 13.

Nov 03, 2015 | Treadmills

1 Answer

Proform treadmill motor shuts off after a second or 2


There may be a problem with the LCB or motor.
I repair this brand for the distributer in Australia.

Dec 14, 2013 | Proform Crosswalk 500 Treadmill

1 Answer

Motor belt is torn need to replace


see the video attached and proceed according. God bless you

Dec 02, 2013 | Proform Pro-Form PFTL11010 Power 1080...

1 Answer

I need screws to reattach control panel to my pro-form 590-ls crosswalk treadmill


Dear Sir:

You need to check you user manual. Anyway you must need 6 long screws philips for attach plastic-iron about 1 -1/2"-to 3/4" you can buy in any hardware.

You can download your user manual free http: //fitness.manualsonline.com or+go
www.proform.com go customer service and then parts & manuals put you model and serial number and download and ready.

sincerely.

Oct 08, 2011 | Proform Crosswalk 500 Treadmill

1 Answer

We are wondering how to lubricate the pro-form 380 E treadmill. Can't seem to find any directions in the User's Manual.


hi,
For lubricating treadmill you can use teflon based silicon lubricant. The followihg video will help you to lubricate your treadmill.
OK


Aug 16, 2011 | Proform 380 CS Treadmill !

1 Answer

I am looking for a user manual for proform elleptical xp 730


To get an owners manual you can one of two things. First, go to
www.iconservice.com in the manuals link. There you can type your
model number/model name found on your machine usually on the bottom of bikes and ellipticals, and underneath the belt when the machine is in spacesaver position on treadmills. It will give you a PDF version that you can download for free. You can also call for a
hardcopy but it will cost around $20 with tax and shipping. The
number is 1-800-999-3756.

Aug 07, 2010 | Proform Treadmills

1 Answer

Need a manual for proform 760 upright bike


To get an owners manual you can one of two things. First, go to
www.iconservice.com in the manuals link. There you can type your
model number/model name found on your machine usually on the bottom of bikes and ellipticals, and underneath the belt when the machine is in spacesaver position on treadmills. It will give you a PDF version that you can download for free. You can also call for a
hardcopy but it will cost around $20 with tax and shipping. The
number is 1-800-999-3756.

Aug 05, 2010 | Proform 650 Crosstrainer Treadmill

1 Answer

Jerky treadmill


Please check out this tip I wrote. Please let me know if you need anymore help.

Apr 08, 2010 | Proform Crosswalk 500 Treadmill

Not finding what you are looking for?
Proform 575 Crosstrainer Treadmill Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proform Treadmills Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

286 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Jon Schniers

Level 1 Expert

13 Answers

Are you a Proform Treadmill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...