Question about Lexmark X75 All-In-One InkJet Printer

2 Answers

Printer sends out blank paper

It looks like it is ready to print graph comes up on screen than paper comes out blank and graph goes across to show printing complete. have tried everything reinstalling unpluging changing ports nothing works

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After three days, the Coast Guard is suspending the search for three boaters who remain missing in the Gulf of Mexico. "We have extreme confidence that if there were any survivors on the surface of the water that we would have found them," offered Capt. Tim Close. "It's our intention that at sunset today, at about 6:30, we will suspend active search efforts." The Coast Guard had been looking for the men since Saturday after they were reported overdue from a deep-sea fishing trip. But there has been no sign of Detroit Lions free-agent defensive end Corey Smith, Oakland Raiders linebacker Marquis Cooper or former USF player Will Bleakley. A fourth boater was found alive yesterday morning, riding atop the overturned boat about 40 miles off the coast of Clearwater. Nick Schuyler told investigators that the 21-foot craft overturned in rough weather some time on Saturday afternoon and everyone scrambled to put on life jackets. At some point, three of the men became separated while Schuyler was able to remain with the boat. Coast Guard officers notified the boaters' families this afternoon. None of the family members spoke publicly after that, but Capt. Close characterized the reaction as "upset." The Coast Guard estimated that its crews had searched 24,000 square miles during 50 missions from the air and on the water. Close discouraged any private attempts at a search in the area, which is 30 to 40 miles off the coast of Pinellas County. "We don't want another search and rescue situation as a result of any good Samaritan efforts out there," he added.

Posted on Mar 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 191 Answers

You may check your ink cartridge
1) the cartridge some 3 color almost empty, need to change a new one or refill the match color ink. test it and go next if not fixed
2) long time less using cause 3 color ink chanel(holes) dry out, you may take out the color ink cartridge and put it's surface of bottom (just touch ) in the clean water 1 -2 Hrs, then set back and test it. still not fixed, you also need to do same thing if your print head is separated from your ink cartridge

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic KX-P7110 printer won't print from the auto feed tray, shows error when printing is attempted.


Hello,
Please check the entire length of the paper feed path from input to output for a small piece of paper that is stuck causing a "Paper Jam".
You are lucky that you can still print manually as this usually shuts a printer down until the jam is found and removed!
Good Luck!
Rich Lilja

Jan 06, 2014 | Panasonic KX Office Equipment & Supplies

1 Answer

I send a print from Word. The green light that normally blinks goes on solid and no printing happens. I push the long reset button and 1 page comes out with one line of gibberish across the top. The...


Does it happen from every word-document? This is a postscript error. It can be in your document (you can test it by making an other document in word and print it. If it comes out properly, than you have to look for components like photo's, pictures, graphs in your document that causes the problem. It can also be a problem of your driver. In that case you need to uninstall and re-install your printer again. It can also be a memory problem of your printer. Please turn off your printer, wait a while, than turn it on again and see if it is still the same problem.

Aug 05, 2011 | HP LaserJet 6p Printer

1 Answer

If I am not printing continuously, the printer does not print the first 5-6 printing jobs. When print job sent to the printer I get a blank page (printing job can be more than one page). After the blank...


Hi there,
It seems that " Print on both sides (Manually)" is selected in printing options., when you want to print any document Go to file Print > select printer and click properties and disable the Manual printing option in device settings.
You should be able to get printing without errors,
if the option is not checked then check for the default paper tray,
save the settings and reboot your laptop/desktop and restart printer as well so that settings should work properly and any given command gets clear from memory, If these all settings are ok, Uninstall the printer driver and download the latest version drivers from HP website and install see links below
hp LaserJet 1150/1300 printing system hp LaserJet 1150/1300 PCL5e driver

If you require more assistance feel free to reply to this post
Regards, BA

Jan 14, 2011 | HP LaserJet 1150 Printer

1 Answer

I was trying to print envleopes 7.25" x 5.25" with


In the printer properties go to features and then go to resizing;custom options and choose your print job.


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 28, 2010 | HP Photosmart C7280 Printer

1 Answer

Hi my omni 3200 printer is not printing. The page


You either have the wrong paper in the machine or it is in backwards. It takes thermal paper. Run your fingernail across the paper and if it makes a mark, that is the side which must be facing up when it goes trough the printer.

Jun 19, 2010 | VeriFone OMNI 3200 (P092-101-10) Printer

1 Answer

Green ready light on, but will not print


When you refilled the paper, did you load a different size paper? Try this: on your PC, left click on START, then left click on CONTROL PANEL. Next, left click on PRINTERS. Find your BROTHER on the printers page and view the status box. Does it show READY? Are there any DOCUMENTS pending? Left click (you may have to click twice)on the BROTHER icon. The PRINT QUEUE appear, showing any documents waiting to be printed, and their status. If anything is in the queue, cancel all documents so the queue is clear. Next, RIGHT CLICK on the BROTHER icon . On the drop down menu,left click on PRINTING PREFERENCES. Make sure the settings match the paper you have loaded in your machine. If something is not right (Paper size, orientation,etc) the machine will not print. Carefully check all the settings and correct as necessary. To test, first click OK to exit PRINTING PREFERENCES. On the same menu, left click on PROPERTIES. On the GENERAL tab, left click on TEST PAGE button to generate a test print.

Aug 09, 2008 | Brother HL-2040 Laser Printer

2 Answers

Paper goes through the printer as though printing but paper comes out blank


Just make sure the cartridges are not running out of ink. Try with different carts, It should work fine.

Apr 20, 2008 | Office Equipment & Supplies

1 Answer

Doesn't Print - Says "Paper Jam"


That is the problem, machine will show printer jam if paper feed rollers fail to pick up paper when requested, your machine sounds like it needs new paper feed roller or you can clean the paper feed roller with a slightly! damp cloth.

If no jam light shows when power is turn on and machine comes to ready and then you send a job to printer and it then shows jam then it is the feed roller or sometimes the feed clutch

If on the other hand it always show jam then there is or a switch is stuck.

Oct 25, 2007 | Kyocera Mita FS 1200N Laser Printer

Not finding what you are looking for?
Lexmark X75 All-In-One InkJet Printer Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...