Question about Agri-Fab Agri - Fab Snow Blower - 42"

Open Question

Installing older blower on newer lawn tractor

I just bought an older snow blower for a lawn tractor .The problem is mounting the support that goes under the tractor,it ok in the back ,where it bolts in the trailer hole. But there's no place to mount the front of it to the tractor.It's a sears craftsman, snow blower model # C151610610,serial# 973164 .The tractor is a new 22hp Craftsman.

Posted by on

4 Suggested Answers

  • 16 Answers

SOURCE: CRAFTSMAN SNOW THROWER DRIVE WHEELS WILL NOT MOVE

well if it is a walk behind style it could be the drive is out of adjustment, also craftsman were famous for the cable mounts bending and that will throw them out of adjustment. follow the traction drive linkage down to the base of the blowe and there should be an adjustment, or it will be under the belt gaurd or even on the handle on some.

Posted on Feb 04, 2010

huffman49
  • 235 Answers

SOURCE: snow blower lever is stuck....won't move to

sounds like the cables are loose retighten all cables...good luck

Posted on Apr 14, 2010

  • 148 Answers

SOURCE: Does anyone know where I can get the 5-1/2" V

Try your local power equipment dealer. They usually have many brands in stock and may be able to match one up with a different manufacturer if they don't carry your brand.

Posted on Feb 02, 2011

barterjoe
  • 335 Answers

SOURCE: the dumb aholes at sears

Lol, Sounds like sears ;) I looked a a few cross reffs at sears and could not find it.
I might recommend a piece of 1/8" plate. Mark your holes and bolt it on after an hour with a drill. It will be better and more functional. Good luck
Joe

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Snowblower attatchment not working


you must get a longer belt and, install an idler pulley
your craftsman dealer has the conversion kit parts

Nov 18, 2013 | Garden

1 Answer

Will snowblower attachment 190-832 fit a 2006 yard machine lawn tractor


Most of the Yard Machine lawn tractors have a welded tube front axle and they are not strong enough to handle the weight of a snow thrower.

The snow thrower is generic but you will need the correct mounting brackets and center frame for your tractor. Go to the agrifab website, call the help number and ask them if they have a mounting kit for your tractor. You will need the model number off the nameplate on your tractor frame for them to help you.

Nov 01, 2013 | Agri-Fab Agri - Fab Snow Blower - 42"

1 Answer

Will a snow thrower 42" Mod. no. 486.248392


As long as your deck mounts match up then you should be good to go. You might have to change to a different sized belt though. Other than that everything should be fine.

Feb 07, 2011 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

I have a husqvarna lawn tractor that came with a 50lbs weight and bracket. It did not come with the installation for the bracket and weight.


Without a picture I will guess this is a rear weight kit for a snow blower attachment. It mounts on the rear of the tractor frame.
These mounting instructions are single page drawings that come in the box with the kit. Almost all of us throw them away when done.

If you can't figure it out you can call Agri-Fab and they can send you the assembly instructions (for a cost) Their number is (800) 448-9282

Jan 11, 2011 | Husqvarna 20HP Hydrostatic 42" Cut Riding...

1 Answer

Do all sears snow blowers fit on a craftsman lawn mower


yes and they will also fit ayp, husqvarna and poulan riders as they are all built by the same mfg. just be sure to get the snow blower that is for your modle tractor

Nov 24, 2009 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

Got a 42" snow blade and no paperwork with it.


Ok that snow blade attachment was Made for Sears/Craftsman by AGRI- FAB. Go to thier website. Email them that you bought model number xxxxxxx and there were no instructions in the box. They will either tell you how to down load the instructions or send them too you. I have had the best luck with AGRI-FAB they like happy customers.

Oct 18, 2009 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

How to remove snow blower from Craftsman YS4500 garden tractor


Go to www.managemyhome.com to download the manual for free. Just type in the model # 944606950.
Good luck!

May 21, 2009 | Craftsman 20 hp 42 in. Deck Lawn Tractor -...

2 Answers

Mounting snow blade to lawn tractor


It attaches the the front of the tractor. Similar to a plow to a truck. If you don't have the brackets, you will need those, or make your own. You can see a picture of the brackets if you go to sears.com. Click on the PartsDirect link at the top, and enter the blade model number.

Sep 29, 2008 | Garden

Not finding what you are looking for?
Agri-Fab Agri - Fab Snow Blower - 42" Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Agri-Fab Garden Experts

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

tfelton3

Level 2 Expert

183 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

335 Answers

Are you an Agri-Fab Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...