Question about Sharp MX-2300N Color Copier

1 Answer

Fax Recive Error on sharp MX2300-N "receive impossible"

Everytime the fax tries to receive we get an error "Receive Impossible" error code 46-0000. help.....

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Communication report codes
46 NO RESPONSE The FAX signal from the remote party is not detected within T1 time. <Send/Polling>

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ERROR T82 BIZHUBC280 IMPOSSIBLE TO SEND OR RECEIVE FAX


Check your fax line connection is the FAX line plugged into the Line jack on the copier and NOT THE TELE connector. Must be Line. Take a old phone like a old princess phone and hook it up to the wall get a good dial tone call some one any noise? Have some one call the fax number OK if hooked to the copier get the tradition noise of a fax line, Check the fax line itself use only one with two wires not four, black and yellow only no red and green. Also put on one of the EMI devices on the cable going into the copier cut down on electrical noise. Line can not be digital must be all analog (POT) Plain Old Telephone, have your phone provider check the line.

Oct 18, 2010 | Minolta Printers & Copiers

1 Answer

I just received a new sharp mx-m260 copier and now need the mx-mm9 fax function. How hard is it to install the fax function


which model do you have. you have listed two different models in you post mx2300 is color MX260 is b/w.
Anyway the mm9 is a memory module for fax not a fax kit. The fax kit is a Fxx7 I think

May 24, 2010 | Sharp MX-2300N Color Copier

1 Answer

I need assistance with fax error codes # 322 and # 358. What do they mean?


Error code 322- There was a communication error with the receiving fax machine due to poor telephone line conditions.
Solution
Set the receiving machine to receive at a slower transmission speed
If the session fails after sending several pages of a large document, resend the document as several smaller documents.
Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error code 358--
The remote user pressed the Stop key,
The remote machine encountered a system problem such as no paper or a paper jam.
Try
Configure the local fax machine to use a slower reception speed.
Disable ECM mode on your machine.
Try sending a fax to another location.

Mar 03, 2010 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Brother mfc- 665cw, receiving faxes


From the Brother web site.


Description of Problem 100000018247
When I launch PC-Fax Receive Program, I receive an error stating: The Fax Receive program must be started to receive PC faxes. What can I do?pc fax rx

Description of Solution 200000023257
You may receive this error if the pc fax application is closed and you have faxes stored in the memory of the machine. To resolve this issue,you will need to print the faxes already stored in the memory of the machine. To print the faxes, please follow these steps:

1. Press the MENU key.

2. Press the UP OR DOWN ARROW key to select Fax.

3. Press the OK key to confirm your choice.

4. Press the UP OR DOWN ARROW key to select Print Fax.

5. Press OK.

6. Press the BLACK START key.

- Your Brother machine will print the stored faxes.

7. Press the STOP/EXIT key to exit the menu.

8. Once the stored faxes have been printed, click WINDOWS/START, (ALL) PROGRAMS, BROTHER, XXX-XXXX (X = MODEL NUMBER), PC-FAX RECEIVING, XXX-XXXX or RECEIVE (depending on your operating system).

9. The Brother PC-fax receiving icon will now appear in your Windows Task Tray indicating that Brother PC-Fax Receiving is active.

Jul 03, 2009 | Brother MFC-7820N Printer

1 Answer

Receiving error 388. Can receive faxes but won't connect with other fax machines when trying to send


Hi,

The reason for the error code:
4e5e48b.jpg Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Please Click here and follow the instructions to resolve the issue.

May 21, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Not receiveing Fax.


Make sure the receive mode is set to Fax only
1-Press Menu/set,0,1
1-receive mode
2-Press up or down arrows and select Fax Only
Press/Menu/Set
3-Press Stop/Exit

Apr 03, 2009 | Brother MFC-7220 All-In-One Laser Printer

1 Answer

HP Photosmart C6150 Error Message Cannot send or receive faxes


hi!!

try to re-installe the driver of your printer

Nov 10, 2008 | Printers & Copiers

1 Answer

Receive mode error msg


its already in autom. fax receiving code. so there is nothing you should change within the setting ;-)

May 01, 2008 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Comm. Error


Try this website: http://www.instruccionesweb.com/u2/pdf/fax/Canon-L120-en.pdf

Jun 25, 2007 | Canon L120 Fax Laser Printer

Not finding what you are looking for?
Sharp MX-2300N Color Copier Logo

2,394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...