Question about Philips Magnavox 27MS343S 27" TV

1 Answer

Installed tb 100mg9 , no signal

Chan. 3 " no signal "

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 28 Answers

Tuner.

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get to ch 3 on my sharp 13f-m50?


Try this:
while holding vol- & input buttons on tv plug in set when "k" appears push vol- & chan-

You will have to look around the menu for the reset option to default to ch 3. Be careful. You are in the service mode.

May 14, 2014 | Sharp 25N-M100 25" TV

1 Answer

How can I Put tv on video mode without a remote


try this,press manual buttons on tele as if you are changing tv chans ,if you do this thru all mem chans on tele you should come to one that changes to video input this has worked for me on other televisions.

Feb 06, 2010 | Symphonic WF20D4 TV

1 Answer

Ihave an old Toshiba tv and a Systemlink 3 romote. I lost the code book, please send me the codes. Thanks


The codes for Toshiba are: 049, 071, 072, 089, 105, 109, 117, 118, 160, 162.
1.Find the three digit code(s) for your TV set.
2. Manually turn on the TV set.
3. Press and hold the CODE SEARCH button until the indicator light is lit. Then release the CODE SEARCH button. (The indicator light is located above the TV button).
4. Press and release the TV button. (The indicator light will blink and then remain lit).
5. Enter a three digit code found at step 1 using the Number Buttons.(After the code is entered the indicator light will turn off).
6. Aim the remote at your TV. set and press the OFF/ON button. If your TV set turns off, then proceed to step 7. Otherwise, repeat step 3 to 5 using the next code on the list. Press CHAN up button to double check for accuracy of the code. the programming is complete if the TV set responds by going up a channel. Otherwise repeat steps 3 to 6 using the next code on the list.
7. Press CHAN up button to double check for accuracy of the code. the programming is complete if the TV set responds by going up a channel. Otherwise repeat steps 3 to 6 using the next code on the list.
Good luck and I hope this helps. Thanks for using fixya.

Jan 03, 2010 | Toshiba 27A33 27" TV

1 Answer

I attempted to see if I could get the menu to adjust the screen because the bottom of picture was not showing on screen and somehow turned the FPA ON...by mistake Now tv won't turn back on and I don't have...


is there a menu on front of tv if so push it then use the chan up/down and vol up/down to select what you want. Now if there is not a menu on the set then push the chan up and down at the same time on some sets this will let you into the menu give it a try good luck.

Jan 02, 2010 | RCA 32V420T 32" TV

1 Answer

Need to have tv on chan. 73, for dish access


When I had Dish hooked up I had to use chanel 3 on my television or the video inputs. The Dish box will take care of all the stations that yor receive. You shouldn't have to change chanels with your tv.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

May 04, 2009 | GE 19GT317 19" TV

1 Answer

LXI TV-menu options keep scrolling. How do we stop this?


I believe pressing the VOLUME UP and VOLUME DOWN buttons at the same time is what puts the set into demo mode. (It might be CHAN UP and CHAN DOWN at the same - been so long I'm not sure, but I think it's the volume buttons.)

Nov 08, 2008 | Standard (CRT) Televisions

1 Answer

RCA F20518WN 19" tv


Sorry, I am not sure..this is not really my area of expertise. You would probably want to get in touch with Bestdarngood

He'd probably be able to assist you better. Please do not rate this post, as I was unable to provide you with a solution..

May 19, 2008 | Standard (CRT) Televisions

1 Answer

How to change systems on the Old telefunken MP204 TV


sounds like your vcr out is chan 3 or 4 try switching the tiny switch to like 4 and then put your tv on chan 4... make sure your afc swith on the tv is on also if the set is not digital fine tune in 4 with the knob.

Jan 11, 2008 | Standard (CRT) Televisions

1 Answer

GE TV model 25gt239


i have one , to watch DVD or VHS by the audio Video Compenent, from your remote control pess ( 00 ) 2x zero, thanx.

Nov 25, 2007 | Standard (CRT) Televisions

1 Answer

Directv now on video 3, and VCR/DVD player won't work


Playing any source on Chan 3 requires RF coax cable connects hook-up.One is in from source box, other is out to tv.I think you have the coax cables reversed!.......T.

Oct 25, 2007 | Sony KV-36FS16 36" TV

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

667 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Jim Evans

Level 2 Expert

186 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...