Question about Sony Cyber-Shot DSC-R1 Digital Camera

1 Answer

Error message E 91:01 flashing on lcd

Posted by on

  • 3 more comments 
  • mwilson110 Feb 03, 2009

    When powered on, E 91:01 flashes on the lcd screen

  • mwilson110 Feb 03, 2009

    DSC R1

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    E-91-00 shows problem with Flash circuit.
    Please RESET camera, press Menu and initialize camera that will clear this error flashing.



  • Shahid Electronics
    Shahid Electronics May 11, 2010

    I got it, let me know model number of your camera.

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    is it Sony DCR-R1 cybershot?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 67 Answers

Have you attempted a reset of the camera?
Remove battery and memory cards, press reset button (inside the memory card door above the mem stick slot)

Posted on Oct 07, 2010

  • Anonymous Oct 07, 2010

    Reset the camera by removing and replacing the battery then (what they don't tell you in the manual) Turn the camera on and press the reset button (inside the memory card compartment) After pressing the reset button, turn camera off then on again. All these steps may seem redundant, but I've had very good results using these steps.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Has error message


go to the following websites and post the error message

www.ask.com error message flashes deno than on
www.wiki.org error message flashes deno than on

than go to www.youtube.com/
error message flashes deno than on

to see if any one else has every seen this problem and have a fix on video to show you how to fix it


Mar 26, 2015 | Ovens

1 Answer

Shows code U165


This section explains the way to confirm the ink status and the procedure to replace ink tanks. When ink runs out or other errors occur, an error message is displayed on the LCD to inform you of the error. See "An Error Message Is Displayed on the LCD".
When printing from your computer, error messages appear on your computer screen as well.

NOTE

Be sure to install the ink tanks in the correct order indicated by the label on the Print Head Holder.
The machine will not print if an ink tank is installed in the incorrect position.
With the LCD of this MachineMake sure that the machine is turned on, then press the COPY, FAX, SCAN, or MEMORY CARD button. The current ink level will be displayed on the LCD for a few seconds.

g0011480_tcm14-605381.png(A) Confirm whether any symbols are displayed here.

g0011482_tcm14-605375.pngColor or black ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.g0011483_tcm14-605376.pngColor or black ink may have run out. See"An Error Message Is Displayed on the LCD".
REFERENCE

The ink status information is also displayed on the screen that appears during printing.
An error message may be displayed on the LCD during printing.

g0011494_tcm14-605377.pngMachine detected ink out condition. See "An Error Message Is Displayed on the LCD" and take appropriate action.
(B) Empty ink tank.With the Ink LampsYou can confirm the status of each ink tank by the ink lamps. Open the Scanning Unit (Printer Cover) of the machine to confirm how the ink lamps light or flash.
  • Ink lamp is on

The ink tank is correctly set and there is enough ink remaining to print.
  • Ink lamp is flashing

Flashing slowly (at around 3-second intervals)

g0011495_tcm14-605382.png
Ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.
Flashing quickly (at around 1-second intervals)

g0011496_tcm14-605383.png
The ink tank is inserted in the wrong position or it is empty. Ensure that the ink tank is in the correct position as directed by the label on the Print Head Holder. If the position is correct and its lamp flashes, it is empty. Replace it with a new one.
  • Ink lamp is off

The ink tank is not set properly or the function for detecting the remaining ink level is disabled.

If the ink tank is not set properly, press the g0009324_tcm14-605384.png mark on the ink tank until the tank clicks into place. If it does not click into place, make sure that the orange protective cap has been removed from the bottom of the ink tank.
If the function for detecting the remaining ink level is disabled, replace the ink tank with anew one. See "Replacing Ink Tanks".
If the lamps are still off after reinserting the ink tanks, there has been an error and the
machine cannot print. Check the error message displayed on the LCD. See "An Error
Message Is Displayed on the LCD".
Getting the Clear Ink Status InformationClear ink is used only when printing on plain paper.
When Plain paper (Cassette) is selected for Media type and printing begins when clear ink (PGI-9Clear) is low, a message will be displayed in the LCD.

g0011497_tcm14-605385.png(A) Confirm whether a symbol is displayed here.

g0011502_tcm14-605378.pngThe clear ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.g0011503_tcm14-605379.pngThe clear ink tank is empty. See ""The clear ink tank is empty. Replacing the ink tank is recommended." U045" and take appropriate action.
NOTE

  • The ink status information is also displayed on the screen that appears during printing.
  • Clear ink is used only when printing on plain paper. Therefore, it is possible to print on photo paper, or any type of paper other than plain paper, loaded in the Rear Tray, even if clear ink has run out.

The following error message will be displayed on the LCD when the clear ink has run out during printing on plain paper.

g0011506_tcm14-605380.pngRefer to "Replacing Ink Tanks"If you continue printing under the clear ink out condition, see ""The clear Ink has run out. Replace the ink tank." U165/U166" and take appropriate action.When the clear ink hasrun out, printing on plain paper from the Cassette is not possible. The fax, which is received under the clear ink out condition, will be stored in memory.
NOTE

It is possible to print on photo paper, or any media type other than plain paper, loaded in the Rear Tray, even if clear ink has run out.

Oct 01, 2011 | Canon PIXMA MX340 Wireless Office...

1 Answer

Canon MP510 wont print. Error message B300 or


May I know the exact error messages in the printer screen. If it's green and yellow lights that are flashing you need to push more the two cartridges that you replace....also try to clean it using the printer program installed in your computer....good luck and hope it will help....

Mar 31, 2010 | Canon PIXMA MP510 All-In-One InkJet...

1 Answer

Canon MP180 "scanner error" message on LCD screen


Hi there
The MPTools can reset it in till you get time to clean the inkpads.


Click on the link to download it.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time

Mar 11, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

I get an error message, E:91:01 blinking ,I can't find Reset bottom under LCD cover


Hi!
It's flash error. Could be a dead flash fuse on the main board or bad flash board. Contact your local Sony service center, but if they ask too much, you can contact me at toms.safranovs@gmail.com and I will give you a good price.
I work in Sony service center.

Tom

Jul 12, 2009 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Message error


Can you mention the exact error message that appeats on your screen.

Jun 19, 2009 | Dell E153FP 15" LCD Monitor

1 Answer

E:91:01


I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think the flash is on its way to heaven. Some pictures are dark and others completely white out!!

Taking it in to the sony shop tomorrow to see if they can lend any advice - I hope it doesn't mean a new camera as I've not over used it....

Let me know how you get on

Dec 03, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Warning/error message on lcd


Are you still experiencing your problem? I have friends who work with BenQ and I can chase for you if it is still a problem.

Oct 08, 2008 | BenQ DC3410 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-R1 Digital Camera Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

100174 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...