Question about Dyna-Glo D-E36 Infra-Red Wall Mounted Panel Heater

1 Answer

Dyna-glo parts I have a natural gas wall mounted Dyna-glo heater about 5 years old . Model # is RMC-40NGT.... I am trying to find a source for replacement parts as i believe that the thermocouple has died. The pilot lights but goes out after releasing it .. Sometimes it will light but goes out a few seconds later, and a small "click is heard.. Dyna Glo RMI 80 NGT Pilot stays lit. Fires up runs shuts off but will not relight unless you turn up stat. but the pilot does stay lit.

Posted by on

  • Anonymous Mar 27, 2014

    Recommended replacement gas line

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dyna-Glo Master
  • 2,364 Answers

Thermocouples you can buy from any heating spares oulet or national energy a hone well is most common for useing as a replacement

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dyna glo RMC 40 NGT vent less wall heater that I would like to convert to propane, I need to know which conversion kit to buy, and where. Thank you.


dyna glo natural gas heater Questions & Answers - Fixya

www.fixya.com > Forum > Tags
dyna glo ventless rmc50 ngt can this heater be changed from natural gas to propaneuse, ... Dyna Glo Natural Gas conversion to LP Gas I have a Dyna-Glo natural gas space ... Question about D-E36 Infra-Red Wall Mounted Panel Heater ... dyna glo heater model #RMC-40GT I believe on your particular model , that you ...

Parts for Dyna Glo, Thermoheat and Dyna Glo Pro Heaters

spaceheaterparts.com/category.sc?categoryId=13
Shop Dyna Glo, Thermoheat, Dura Heat, Workhorse LP and oil fired htrs ... Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr RMC-FA150NGDGD ... This spark plug (ignitor) is used on Dyna Glo and Thermoheat 40K btu LP.

Propane Wall Heaters - Walmart.com

www.walmart.com > ... > Heaters

WalmartDyna-Glo IR18NMDG-1 18,000 BTU Natural Gas - Infrared Vent Free Wall Heater. $170. ... Dyna-Glo 40K Liquid Propane 360-Degree Tank Top Heater. $88.00 ... Dyna-Glo Deluxe RMC-FA125DGD Portable Gas Powered Forced Air Heater.

1352062 Dyna Glo Natural Gas conversion to LP Gas

162.220.53.34/F/.../t1352062-dyna_glo_natural_gas_conversion_lp_gas

Jan 12, 2016 | Heating & Cooling

1 Answer

I need a thermocouple for a dyna glo heater model #RMC-40GT


I believe on your particular model , that you have to replace the entire pilot assembly. As the thermocouple is an intricate part of it. In which case any LP or Natural Gas heater's pilot assembly will fit it. You will have to secify either Natural Gas or LP Gas when ordering.

I have provided 2 links to where you can purchase the pilot assembly you need.

http://www.mrheater.com/OrderParts2.aspx?catid=57

http://www.aandbsales.com/index.html



I hope this helps you & thanks for choosing FixYa.

Jul 29, 2011 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

1 Answer

I have a Dyna=Glo model RMC-40ngt. I can get the


CHANCES ARE YOUR GAS VALVE IS DEFECTIVE. THE SAFEGUARD PURPOSE OF THE VALVE IS TO PREVENT GAS FLOW IF THERE IS ANY REASON THE SAFETY FACTORS DON'T CHECK OUT RIGHT.

Mar 06, 2010 | Heating & Cooling

1 Answer

We currently have a Dyna Glo wall heater in our "garden room" and want to buy another for a 2nd home (will go in garage). Our model number is RMC-50NGT. Where can I buy??


Hmmm ... where did you buy the last one? Are they out of business?

Here is what I found when I used Google:

http://www.mytoolsbee.com/cat164509.html

Ace Hardware may be a place you can order this stove from also.

Thanks for your question at FixYa.com

Feb 16, 2010 | Dyna Glo "" Natural Gas Heater Mn200tba

1 Answer

I have a Dyna-Glo vent-less wall mounted natural gas heater model number RMI-60NG Pilot light ignites.However no gas will supply too the burners.Causing them to be inoperable.What might be the cause of...


If it is a few years old, it could be the thermocouple. These are usually available from Lowes. Take your model/serial # and if you can, take the old part too.

Dec 11, 2009 | Dyna-Glo Heating & Cooling

1 Answer

Have Dyna-Glo Unvented Gas-Fired Room Heater,


I had the same issue. Iwent to the local harware store and bought heay duty mirror hangers. They work great for only a few bucks.

Oct 22, 2009 | Dyna-Glo Heating & Cooling

2 Answers

No Gas getting to the pilot


Thanks for the response......when I mentioned in the original problem of getting no gas that was with depressing the safety switch to light the furnace,,,,,,,,,I still get no gas when this switch is pressed.....I was looking at the furnace today and noticed there are a couple different lines running through different parts......I'm not sure which is a sensor bulb.........do you a reference site on the web that can help me or a place to find a manual for a dyna-glo heater ?

Nov 22, 2008 | Heating & Cooling

1 Answer

Wall mount dyna glo model RMC-40NGT


I have the same one i am looking for the wall brackets, I lost mine. I also bought mine at a garage sale the people had it attached to the wall completely hooked up .they had no fire backer on it .They only took it off the wall when i purchased it

Nov 02, 2008 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

3 Answers

Dyna-glo parts


the "click" you hear is the pilot valve closing. the pilot valve is spring loaded to shut off when a flame is not detected or is detected then is not. try this desatech site. it is for reddy heaters but they might have the thermocouple you are looking for.
www dot desatech dot com or
www dot robinrents dot com/heaterparts.htm

Dec 04, 2007 | Heating & Cooling

Not finding what you are looking for?
Dyna-Glo D-E36 Infra-Red Wall Mounted Panel Heater Logo

1,746 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyna-Glo Heating & Cooling Experts

paulcarew

Level 3 Expert

2364 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

drifterray

Level 1 Expert

10 Answers

Are you a Dyna-Glo Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...