Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

U2 PROBLEM blinking U2 and will not print - Sharp AR-5316 Advanced Digital Imager Copier

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

U2 RAM error
U2-00 EPROM error
U2-01 Counter error
U2-01 Memory back-up battery dead
U2-04 EPROM error
U2-11 Main counter error
U2-12 EPROM error

As you can see there are many U2 error codes. Needless to say, find your code and the replace the bad part. The battery is on the main board. The EPROM is on the main board.
If you find your code, replace the part and error still remains -- replace main board.

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp AR-336 Copier u2-00 error


Check EEPROM for proper set-up
To prevent the erasure of counter data
and adjustment values, write down the
counter data and adjustment values by
simulation. (If there is a printer option,
execute SIM23-1 and note counter
data/adjustment values.)
Clear U2 trouble with SIM16.
Replace PCU PWB.

Dec 04, 2013 | Printers & Copiers

1 Answer

Copiadora sharp al1645cs aparecendo cod.u2


Press c photo c photo 16 press print key

Feb 10, 2010 | Sharp AL 1631 Copier

3 Answers

Solution for SHARP AR 5127 error U2-40 call for service


This means that the cartridge's sensor is miscommunicating with the copier memory thus the code U2 -40. You should clean the inner sensor connector and the toner sensor of the spilled toner by low blower. Perform this code ;# , interrupt , C, Interrupt keys in that order and press 16 then Print key and the code will be cleared.

Feb 02, 2010 | Sharp AR-5316 Advanced Digital Imager...

3 Answers

Error u2


Press #, Interrupt, C, Interrupt. Enter 16 print.

Dec 02, 2009 | Sharp AR-5320 Black and White Copier

1 Answer

U2-40


Push P * C* in quick succession to enter simulation mode. Once there, enter 16 on the keypad. push the print button (like making a copy). Push 1 for yes then print button again. push the CA button. Copier should reboot and run fine for you.

Apr 01, 2009 | Sharp AR-M237 Copier

1 Answer

U2 main code 40 subcode on A-162 Printer


u2-40 is a code that this copier will show if the toner unit is a non oem product , you can rest simulation 16 in the service modes but the error many come back

clear, interupt , 0 , interupt , 16 clear all and print
many need to do this severl times

Feb 09, 2009 | Sharp Printers & Copiers

1 Answer

Sharp AR-5127, the error code U2-40


U2-40 is a board error, F1-15 is finisher lift motor error.

To reset: #, interrupt, clear, interrupt. (screen should say service mode), enter 16, print, are you sure? , yes.

For the finisher error, follow above procudure, entering 14 instead of 16. if error returns, disconnect the finisher

Nov 26, 2008 | Printers & Copiers

1 Answer

U2-40


The code was not included among the Status Code Indicator RAPS. U2-40 is a Communication Error between the Main PWB and the CRUM on the Toner Cartridge (CRU).

Sounds like the toner cartridge is not seated or is defective.
What that message is saying is that the small chip on the back of the toner cartridge is not communication with the processor board.

Jan 10, 2008 | Sharp AR-160 Copier

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

Related Topics:

1,175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...