Question about Proscan 32LA25Q 32 in. LCD TV

2 Answers

No signal from my dvd player

How can I hook up my DVD player to my Proscan 32 inch LCD TV.

I have RED, WHITE, and YELLOW but no picture.

Posted by on

  • aclj12 Feb 03, 2009

    Thank You for your response but I try that and I still do not see or hear anything except "NO SIGNAL"

  • aclj12 Feb 03, 2009

    I did that and made sure the red white and yellow went to the same color but again I get a "NO SIGNAL" and I even tried all the different input selections. Now I bought a proscan LCD TV and there are many different places where I can put the different color wires, maybe I need different cables.

    Please advise.

    Thanks for your help

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can you tell me how to connect my dvd player to my 42 inch proscan hdtv ? There are no yellow,its blue and there are two rows of the same colors.

Posted on Nov 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Does your TV has same red-white and yellow input pins? If yes, hook cable as per color and select proper input of TV by remote, play dvd player and enjoy.

Posted on Feb 03, 2009

  • 1 more comment 
  • Shahid Electronics
    Shahid Electronics Feb 03, 2009

    Please check what input number is at TV pins where you put leads of red-white and yellow. Now select that specific input by tv remote.
    Make sure put yellow to yellow, red to red and white to white in player and TV.
    If every this is set as above, There is no reason of "no signal" display on TV.


  • Shahid Electronics
    Shahid Electronics Feb 04, 2009

    There are 3 known video connecting cables for TV and DVD Players.
    Yellow-Red-White calls Composite Video (yellow wire) and red and white for L and R sound channels.
    Another is S-Video, it is special connector cable having 4 pins in round connector. red and white for sound also used with it.
    Component Video is new thing with Red-Blue-Green pins for video and red-white for audio, so total 5 wires used.
    Now you need to look at rear or player and TV for appropriate hook up. Important thing is to select proper AV input in TV to view dvd player picture.

  • Nancy Vickowanich
    Nancy Vickowanich Jan 22, 2016

    how do you do the proper input. i have tried everything on the TV

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What channel do I set the TV on so that the dvd will play


Hi,
Hook audio/ video cable from dvd player to AV input of tv and select that AV input in tv to watch dvd playback picture.
You will see yellow jack (for video signal output) and red-white jacks (for audio left-right output signal) at rear of dvd player, plug AV Cable and hook it in AV input of tv, make sure yellow pin connected in yellow jacks of dvd and tv.
Thanks.

Feb 18, 2011 | Sony DVP-SR200P DVD Player

1 Answer

Dynex dx-32l151a11 the picture is black and white with the dvd player


With a Black and White picture it sounds like you're trying to connect the DVD Player's "Composite" connection to the TV's Component Connection.

Composite is a 3 wire system with Yellow for the video, and red and white for the audio. On your TV this connection is located on the side.

Component is a 5 wire system, with Blue, Green & Red for Video, and Red and White for audio. On your TV this connection type is located on the rear panel.

Check to make sure you are hooking the DVD player & the TV to the same input types.

Dec 26, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

3 Answers

How do I hook up my Wii to my 32" Emerson lcd hd tv? I have my dishnetwork satellite hooked into the dvd player and it's hooked up to the TV. On my remote I don't see a "game" button like my older Emerson...


I found a better way and it works fine. I have a new 32 inch Emerson, with only one composit hood up ( which won't work with the wii) 2 HDMI's ( again does not hook up to the wii, the monitor hook up for PC, red and white ( yellow plus is not there it's for a stereo they told me), and the usb hook up ( which is more for pictures I was told by the company).The answer was to hook my RCA plus to the red and white under the composite, then hook the yellow into the green plug of the composite, and behold- my will now works fine.

May 04, 2010 | Emerson EWL20S5 20 in. EDTV-Ready LCD...

2 Answers

How do I hook up a DVD player to a proscan 32 inch flat screen tv?


Hello,

to connect your TV to your DVD, you will be needing a RCA wire (Yellow, white and Red wire). The yellow stands for video (visual/display), while the read and white stands for audio (sound).

Look at the back of your DVD, look out for Video Out, connect the yellow wire there. Also look out for Audio Out L & R, connect the white and red wire there.

Then turn the back of your TV, you will find Video, and Audio IN, Connect the other part of the wires from the DVD to the DVD, that is, Video for video and audio for audio.

Once you have connected the wires, turn on your TV, and your DVD player, press source on your TV remote to AV, and you will see your DVD displaying on your TV.

That's to hook up your DVD to your TV. Follow instructions carefully and you won't have any problem.

Good luck.

Apr 17, 2010 | Proscan 32LA30Q Television

1 Answer

I have a problem I am trying to connect my dvd player It shows black and white i have a proscan 32 inch what can I do to fix this ? please help.


Check to make sure the Video connector (YELLOW) is connected to a YELLOW plug on both the TV and the DVD. If it is plugged into a GREEN plug then it will produce the black and white picture and not a color picture.

Good Luck...

Feb 24, 2010 | Proscan PS32700 32" TV

1 Answer

I just purchased this tv. I had no trouble hooking up the satalite cable box but When I hooked up the dvd player the picture is only in black and white. How do I fix this?


Are you using component video (red/blue/green) rca jacks, or composite video input (yellow) rca jack? You need to match the color but watch out and do not get confused with the red and white RCA for audio.

Dec 17, 2009 | Proscan 26LB30QD 26 in. LCD HDTV

1 Answer

When i connect my dvd player to TV i only hear sound but no picture


hi there

your dvd player got three cable one red two white
three yellow ok here i go dvd player input plug in the yellow cable in the yellow in put @ the back of your dvd dvd player
the white cable and red cable is your sound the yellow cabe is your picture see that you have a yellow input @ the back of you tv and plug in the yellow in it then it will work

Dec 14, 2009 | Toshiba Regza 32LV67U 32 in. LCD HDTV

1 Answer

How do i hook my dvd player to my tv? i have no manual to show me where to plug the wires into the back of my tv.i have a proscan 32LB30Q LCD


Hello pebbles12137,

This depends on what you want to do SD or HD

First if you just want to connect for SD only

Here are Three ways:

1) connect the coaxial cable to the DVD player F-connector (sliver screw connector) and the to the TV's Antenna in F-connector.

2) connect the yellow, red and white RCA connector end wires to the yellow, red, and white RCA Jacks of the TV Yellow (video in), Red (Right Audio in), White (Left Audio in) do the same for the other end into the DVD player (Best SD Method)

3) connect the svideo cable into the s-video socket of the TV and the other end to the s-video socket of the DVD player


For HD, Here are the connection methods:

1) Connect the HDMI cable to the HDMI in of the TV (HDMI1)and the other end of the HDMI cable into the DVD player. (best HD method)

2) connect the Component video cable (RGB) into the RGB sockets of the TV (should be marked as Component 1) and connect the other end to the DVD player (using this method you will have to connect the Red and White audio cables to the audio input jacks of the TV from the audio out of the DVD player)


These are the SD and HD methods.

I would suggest using the HDMI cables only, its the best choice and the simplest.

I hope this helps,

Thank you,

Shuttle83

http://www.electron-age-technologies-llc.com

Jun 21, 2009 | Proscan 32LB30QD 32 in. LCD TV

1 Answer

Where do the yellow,red, and white cords connect to on my Proscan 37'' DVD/HDTV


it depends on what signal your sending to the tv.
red and white are usually sound and yellow is picture or AV.
you may need to select the input on your TV to recive a picture. Does this help?


May 07, 2009 | Televison & Video

1 Answer

Picture but no sound


Best to use the a/v cables.
Your player should have output ports for audio and video, on the ports that say output, plug the cable red to red, white ot white, and yellow to yellow.
Now, the cable going the back of the TV. Your choice, input1 or input 2. Just plug red to red, white to white, and yellow to yellow.
Now press the the input button on your remote until the picture and sound appear.

Apr 09, 2009 | Emerson LC320EM9 32 in. LCD HDTV

Not finding what you are looking for?
Proscan 32LA25Q 32 in. LCD TV Logo

Related Topics:

1,031 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...