Question about Kenmore 46462 Front Load Washer
The washer starts cycle and stops ( drain & spin cycle) & beeps and shows code F6.
Take off the bottom panel (unplug unit first!) and unscrew the cap on the drain cylinder, be sure to have plenty of towels to soak up the water! pull out the center piece and check out all the treasures stored inside. Be sure to use a flashlight and lift up the black hose behind it to get any leftovers in the hose. I just did it today and could not believe how much stuff was in there...coins. pens, buttons, lost of wet lint had it clogged. The clothes finally don't smell!
Posted on Apr 19, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The control for the washer likely detected a problem. The failure code will not be displayed on all models of washers. You can recall the error code by using this procedure:
Nov 30, 2012 | Kenmore 3.8 cu. ft. HE4t Front Load Washer
Apr 06, 2010 | Kenmore Elite 45986 Front Load Washer
Jan 21, 2010 | Kenmore HE2 Plus Front Load Washer
Aug 27, 2008 | Kenmore Elite HE4 Electric Dryer
1,012 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: