Question about Canon PIXMA MP620 All-In-One InkJet Printer

3 Answers

Need to change ink for first time

Getting started manual doesn't cover how to change the ink?! how to change?

Posted by on

  • 1 more comment 
  • Jchi Feb 07, 2009

    I have the same problem with the MP620! Do you have to press anything or push anything? They seem 'stuck'

  • frodifidy153 Feb 16, 2009

    I have this problem! But...I actually think I installed the ink wrong. They all lit up red, but I didnt put them under the back plastic and now I cannot get them out to put them in proper. The printer will not do anything except say there is an error now

  • gspsissi Mar 10, 2009

    replaced the ink cartridges after refilling them.  the printer still reads that the cartridges may still be empty and won't print.  How do I make it reckognize these refilled cartridges?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you change the ink cartridges in the Canon MG8120B?

Posted on Feb 15, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Open the front door u see ink cartridge pull those ink cartridge .and change it or refillng those cartridge.

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the outer cover for the epson r320 need to change the waste ink pads and give it a good clean


I strongly suggest that you NOT attempt this unless you are thoroughly familiar with the correct
assembly/disassembly procedure. That means you need a factory service manual.
They are available online.

Believe me, it is NOT a simple case of "take off the cover and pull out the pads". Just to get to
the waste ink pads is MAJOR SURGERY on this printer and will require several hours of your time.

It is not just ONE pad either. I believe there are at least SIX.

Best of luck.

Jan 29, 2011 | Epson Stylus Photo R320 InkJet Printer

1 Answer

I have a Canon MP510 printer and have changed the print cartridges many times for refills but am now always getting error 6502. I've tried turning it on and off, unplugging it, holding down power button...


hi,
you mentioned that you turn off and on these is on of the solution of your problem
but in your case it doesn't work

error 6502 arise when ink tanks not snapped properly
follow the steps below
  1. Confirm that the printer is powered on and pull open the paper output tray .
  2. Lift the scanning unit (printer cover) completely. (The print head will move to the replacement position.)
  3. Open the inner cover.


    CAUTION:
    a. Do not try to manually move or stop the Print Head Holder.
    b. Do not touch any metal parts.
  4. Press on the pushmark.gif mark on the ink tank until the ink tank snaps firmly into place.
note:
Make sure that the ink tank is inserted in the slot that corresponds to the ink tank's color.
5.Ensure that all the ink tanks are installed properly and the ink tank lamps light red.
lampslightred.gif
1 -tank installed properly
2-not installed properly


6. check the status of each ink tank according to the way its lamp flashes.

  • - On: The printer is ready to print.
  • - Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.
  • - Fast flashing (at about one second interval): Ink tank is empty, or the printer is not ready due to an error.
  • - Off: An error has occurred and the printer is not ready to print.

  1. Close the inner cover and the scanning unit (printer cover).

    Note:
    1. When closing the scanning unit (printer cover), be careful not to jam your finger.
    2. When starting printing next time, the print head cleaning launches automatically.


  2. regards,
  3. cseian

Dec 16, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Message no cartridge when installing new cartridge. I have installed new ink cartridges but the printer keeps coming up with the message 'No Cartridge' Reinstall the cartridge. I have done this three or...





Hello ,

Start by opening your ink cover and read the LCD screen; this will alert you as to which ink cartridge is not being recognized; make sure the cartridge that it is telling you is empty has been changed.

If the unit is still not recognizing the cartridge you have changed, follow the steps below.

  1. Unplug the power cord for the printer unit.
  2. Open the ink cartridge cover and remove all ink cartridges.
  3. Close the ink cartridge cover.
  4. Plug the power cord back in.
  5. Reinstall the ink cartridges.

Thank you,

Pat

Mar 28, 2010 | Office Equipment & Supplies

3 Answers

How to change ink


Hi there
I have put a PDF files on my website for you to download.

Just click on the links it will download for you.
It got all you need to know in this file.
You can read it on site and print it strait off the website or save it to your PC then print it out.

Click LINK= http://www.4all2sell.com/pdf/Epson-Stylus C86-Manual.pdf

You will need a adobe reader to see this file If you not got an Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time

Mar 14, 2010 | Epson Stylus C86 InkJet Printer

2 Answers

How do I change the ink cartridges's?


Confirm that the printer power in on, and that the machine is idle (not busy printing).

Have the new ink tank handy. You need to complete the installation within 10 minutes (however, you can start again).

1) Open the top cover - the printhead moves to the replacement position

2) Remove the tank to be replaced by pushing in gently on the front tab and lifting up, then out on the tank to be removed

3) Make sure you have the correct replacement ink tank. Tear the orange strip completely from the new ink tank and remove the packaging film

4) Remove the orange plastic protector cap

5) Insert the new ink tank in the correct slot and push in and down until it clicks into place.

6) Close the top cover

7) The next time the printer starts, it may initiate a procedure for preparing the (any) new cartridge(s). Let it complete this procedure before sending a print job.

I hope this info was helpful!

Mar 02, 2010 | Canon PIXMA iP3500 Printer

1 Answer

How do I change my ink cartridges. I cannot find how to take the old ones out. I haven't done this in a very long time.


it is in front of your printer. you need to open the cover and the ink locks will be revealed. press the locks to unlock and eject your cartridges manually

Sep 22, 2009 | Brother MFC-230c Printer

1 Answer

Canon ip1800 printer not working


Hi,

when the yellow led flashes is never a good signal... you should check the manual's printer to find out the error code meaning "4 yellow flashes and 1 green)
Usally it's the waste tank that is full, in this case you need to:

  1. Push “resume” for 5 seconds for canon IPXXXX.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again

Jul 18, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Black ink cartridge doesn't work.


Have you tried
  1. Taking out all the cartridges
  2. Power down the power
  3. Power up the printer
  4. Open the scanner Cover
  5. Close the scanner cover
  6. Message will ask you to put the ink.
  7. Put in Black
  8. Close scanner cover
  9. It may ask you whether the Black is being changed.
  10. Open the cover.
  11. Install Cyan.
  12. Repeat step 8-10 for the rest of the 2 colours.
  13. It should resolve the Black ink empty message.
Let us know if this works.

Thank you.

Dec 11, 2008 | Brother DCP-110C All-In-One InkJet Printer

1 Answer

Change printer ink


Turn on the printer.
lower th epirnter's output tray, pull out the extension, and open the cover.
press and release the ink button.
if your ink lights is on or flashing, the printer head moves to the left, and the cartridge that need to be replaced stops under the ink out mark.
open the cartridge cover
Pinch the back tab of the empty cartridge as your left it out of the printer.
shake the ink cartridge 4 to 5 times while it is still in the package.
unwarp the new ink cartridge and lower it into the holder. Push down gently until the cartridge is firmly seated.
repeal the procedure if more than one ink cartridge is out.
close the cartridge cover.
close the printer cover and press the ink button.
The green power light flashes and the printer makes noise. charge takes about a minutes. When it's finished, the green power light stops flashing and stay on, and the red ink light should go out.

Oct 10, 2008 | Epson Stylus C66 Photo InkJet Printer

4 Answers

Dell 725 printer no manual need to change ink cartridge


Here is the manual

http://support.dell.com/support/edocs/systems/725/en/index.htm
Replacing an Ink Cartridge
  1. Turn on your printer.

  2. Lift the front cover.

scrtcvup.jpg
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.
  1. Press down on the ink cartridge lever to raise the ink cartridge lid.

scrtrm1.jpg
  1. Remove the old ink cartridge.

scrtrm2.jpg
  1. Dispose of the old cartridge properly.

  2. If you are installing a new ink cartridge, remove the sticker and transparent tape from the back and bottom of the ink cartridge.

staperm.jpg
  1. Insert the new ink cartridge.

scrtrm3.jpg
  1. Snap the lid closed.

scrtrm4.jpg
  1. Close the front cover.

saccvrdn.jpg

Feb 09, 2008 | Dell 725 InkJet Printer

Not finding what you are looking for?
Canon PIXMA MP620 All-In-One InkJet Printer Logo

Related Topics:

2,666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98879 Answers

old marine
old marine

Level 3 Expert

1573 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...