Question about StarTech.com VGA to NTSC/PAL PC to TV Video Converter (VGA2NTSC) Video Capture

3 Answers

Requirment of CGA to VGA converter

In one of our CNC machine , original monitor has failed, so i have replaced with the CGA monitor( 9 pin ),so i kindly request you to provide the details about the avalibility of the converter(CGA to VGA) so tha i can replaced with the VGA monitor.Or any other solution to replace with VGA monitor. The frequency of the output not known.

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

All you need is an adapter.
check out:
http://www.pacificcable.com/Picture_Page.asp?DataName=A159FM

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check this out: http://www.moncotech.com/cnc.php
probably it will help
CGA/EGA/MDA/YUV to VGA Industrial Converter

Posted on Aug 07, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The GBS8219 CGA/EGA/MDA/RGB TO X VGA Converter will solve your problem easily.



GBS 8219 is based on the GBS 8218 launch of an innovative industrial Video Converter, GBS 8219 video converter of industrial fully automated operation.
Quick reference for GBS 8219:
Input
Signal
Type MDA CGA EGA RGB RGB Sog RGBS RGBHV YPbPr Interface BNC Port,9 PIN, 3 PIN, 6 PIN, 7 PIN, 14 PIN, 20 PIN, 24 PIN, 25 PIN… Parameter Analog0.5-1.0 / TTL3-5V
75 ohm / 750 ohm
Scanning:Progressive/Interlaced Output
Singnal
Type Standard VGA/SVGA,800*600/60hz,640*480/60hz Interface Standard 15Pin D-SUB Power DC 12V 1.0A / Consumption- 2.0W maximum

GBS 8219 Performance and characteristic
1. RGB, RGB SOG, RGBS, RGBHV, MDA, CGA, EGA, YUV Signal auto scan (Horizontal Scanning Frequency: 12K-40K, Vertical Scanning Frequency: unconstrained)
2. Vertical Resolution :200-600 lines, auto scan.
3. Horizontal resolution: unconstrained, auto scan.
4. Supports sync separation, CS composite sync, SOG green sync, auto scan.
5. Supports monochrome, Grayscale, color signal input.
Quick reference for GBS 8219 interface DC12V Power Supply, DC 12V/1.0A.
MENU To assess OSD menu.
+ /-: To adjust the OSD menu.
VGA OUT: Standard VGA/SVGA,800*600/60hz,640*480/60hz
VIDEO IN: 9 Pin D-SUB input
V Vertical Scanning Frequency.
H/CS Horizontal Scanning Frequencyï¼ââŒor composite sync.
R/Pr Red signal, or the color of the PR.
G/Yï Green signal, or chromatic aberration of Y.
B/Pb Blue signal, or chromatic aberration of Pb.
RUN Power LED.
Note:9 Pin and BNC input signal, only one can be choosed.
9 Pin D-SUB Reference
Technical Support: Mr. Wu
E-mail:sandy@gonbes.com

Official website: www.gonbes.com/en
TEL Phone:0086-755-82053232 FAX:0086-755-82053969
ADD:NO.4W Suotaike Building, Bagua 4 Road,Futian Shenzhen, Guangdong 518029 China

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you install a sabrent vga converter?


TV-LCDHR does NOT require a computer. It only needs a working VGA monitor and a Cable TV service.

1. Connect your coaxial TV cable directly to the "Antenna" port on the back of TV-LCDHR. Plug in the power supply. You should now see a red light on TV-LCDHR.

2. Connect your VGA monitor to "VGA-Out" port on the back of TV-LCDHR.

3. Press the "Power" button on the remote to turn it on. The red light on TV-LCDHR should now turn green.

4. Turn on your VGA monitor.

5. Press "Menu" button on the remote. Go to "Search", select "Auto Scan", and choose "Normal Scan".

TV-LCDHR will now scan through all channel frequencies it may find on your Cable TV service. When it's done, use the remote to change channels and adjust volume.

Note: TV-LCDHR has a built-in mono speaker. For optimum sound quality, we recommend using a pair of amplified stereo speakers. Connect them to the "Audio-Out" port on the side of TV-LCDHR.

Aug 17, 2011 | Sabrent TV-PC85 PC to TV Converter Box

1 Answer

Is there any way to get my 9-pin Wacom tablet to work on my all-USB input laptop? I have a Xircom 9-pin to USB converter, but there are no Win7 drivers for it that I could locate.


If I remember, most of the 9 pin dot matrix printers used either a 25 pin serial, or a centronix cable which terminated into a 25 pin for the PC side. They do make a USB to Centronix cable. I cannot guarantee it will work if your trying to use anything other than a PCL language for your print jobs.

May 18, 2010 | TV Accessories

1 Answer

My Magnavox tb110mw9a converter loses programming randomly.


Badge #7067 is giving you a load of bunk. I have had one for 8 months and the only time I have reprogrammed it was when all TV was to go digital. Even when our power goes out the converter remains programmed.

I would keep calling back. Chances of getting the same guy is slim. Insist on a replacement.

You can also go online at http://www.funai-corp.com

Wayne

Sep 04, 2009 | RCA Analog (RCA) to Digital (VGA)...

1 Answer

My machine has stopped working. What I mean is that there is power to the unit, but I cannot see anything on my TV screen any more. The battery adapter I was using was not the original one. The volatge was...


Make certain that the adapter is not bad. If you can do a search on the internet for your computer brand. If that solve the problem I would try to find the original battery for your computer. It could be your battery was running to rich for the computer.

Aug 10, 2009 | Avermedia iAVerKey DV (IKEYDV00)

2 Answers

Ive just bought a TV to PC(VGA TO TV Converter), ive connected everything and i can see my laptop screen on the TV monitor but there is no sound


I dont think the unit is designed to use sound, it just converts vga to tv, you may have to use a 3.5 to rca phono audio cable to go from the laptop to an audio device, or an imput on your tv

Nov 07, 2008 | StarTech.com VGA to NTSC/PAL PC to TV...

1 Answer

I can't get it to work please help....


You may need to switch your laptop monitor to an external monitor using the Fn + F5 keys or similar -see your laptop manual. This will send the VGA signal to the HD-15 VGA connector going to the converter.

The instructions that come with the unit doesn't address this.

Oct 01, 2008 | KWorld PCTV CONVERTER KW-PCTV-1600 RT...

10 Answers

KWorld PC to TV Converter


I had the same problem. It turned out the issue was that I had the VGA Y-cable connectors between the PC and the KWorld box reversed. They look like they should be interchangeable, but they are not. A closer look at the cable connectors shows that one is marked "PC", one is marked "Monitor", and the 3rd is marked "SCAN CNVTR". Once I got them plugged into the right places, I got the screen image on the TV.

Jan 01, 2008 | KWorld PCTV CONVERTER KW-PCTV-1600 RT...

2 Answers

Vga2ntsc problem


static shocked could be dangerous for your devise they may have blown down you IC(integrated cuircuit) or any other component so please it better to go to a vendor then self experimenting.. or claim your warrenty

Dec 13, 2007 | StarTech.com VGA to NTSC/PAL PC to TV...

2 Answers

VGA 1 Detecting prob


Hi, it sounds like your driver file is missing or corrupt. If you have the orriginal driver disk Delte the driver and re-install it. If you don't have the disk, go to the manufacturers web site and download it. Regards mistyman

Sep 29, 2007 | Philips E-box FTR9964 Video Capture

Not finding what you are looking for?
StarTech.com VGA to NTSC/PAL PC to TV Video Converter (VGA2NTSC) Video Capture Logo

2,063 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com TV Accessories Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

68391 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a StarTech.com TV Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...