Question about Polaroid FLM-323B Television

3 Answers

Polaroid Tlx-01511c dead set

A friend of mine has this polaroid lcd tv that just went off and wont power up again. It is only 8 or 9 months old and hasnt had much use, but Polaroid will not honor warranty because my friend received tv as a gift and doesnt have purchase receipt. Any Ideas as to what the problem could be. I would like to fix set for her since she cant afford to keep buying tv's that dont even last a year.

Thanks,
rick

Posted by on

  • stinger57 Feb 09, 2009

    No lights come on, quick slight static sound in speakers when plugged in. I took out power supply board and the 2 fuses check to be alright. Dont see any bulging or leaking caps. I havent checked transistors or other components as of yet.

  • stinger57 Feb 26, 2009

    I checked the power supply voltages at the pins and get +5 and +12, but I dont think P/on pin is getting a signal or voltage to turn it on. I tried both set on/off switch and remote. Hard to trace board with out schematic. Any one know route the signal for p/on takes or any ideas where to look?...



    Thanks

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just took one of these apart right down to the LCD. The two bulbs in the LCD were cracked. When you turn it on it crackles a little then the light goes out. I tried to find bulbs online but no luck yet. Hope that helps.

Posted on Jul 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Does the blue light come on? If so then its caps in the power supply that needs changing, 1000uf/16v replace all of them.

Posted on Feb 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

The only thing you can do is look inside the TV for blown fuses. But, after that. it's hard to tell what's really wrong with it. And taking it to someone to diagnose the problem will cost more than the 15" TV worth. At the moment, I can't find a Service Manual for that TV yet. But, if I had to guess, the power supply board went bad. Cost about $80.00 at shopjimmy.com. It's only a guess.
Sorry I can't help you more.

Posted on Feb 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Model #SK-32H540S Westinghouse LCD TV about 6 years old when turned on, goes thru Westinghouse logo, then picture lasts for about 8 seconds, then goes dark. I need to know what part I need.


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 13, 2017 | Westinghouse Televison & Video

1 Answer

Polaroid 40" HDTV model tla-04011c


There is no such setting in the device.

Jan 11, 2017 | Polaroid Televison & Video

1 Answer

I was playing a game on my polaroid tv and the screen went black on me. How do I fix it?


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 10, 2017 | Polaroid Televison & Video

1 Answer

Polaroid FLM 323b flickers. How to make this stop


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board . In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Polaroid Televison & Video

2 Answers

Codes for tv polaroid P L A 4205


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. ..

Jan 08, 2017 | Polaroid Televison & Video

2 Answers

I have a rca model led65g55r120q tv flickers and no sound


Check all cables for loose connection, try another input for picture (DVD, BLu-Ray, etc). If none of the other inputs work then it's a panel problem (display) If one or more of the others work then it's a problem with either the tuner or the signal.

Jan 02, 2017 | RCA Televison & Video

33 Answers

TV just flashes different colors


You have entered a diagnostic colour test. With the TV powered on, hold the 'Menu' & 'Enter' together, then press the power button. Problem resolved

Jun 25, 2006 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Polaroid FLM-323B Television Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...