Question about Washing Machines

1 Answer

Washing machine door won't open

My hotpoint bwd129 washing machine door won't open The power went out mid cycle and once it was restored the cycle completed but now the door won't open. We have run it thru the cycle several times to see if it cleared the problem but without success. Any advice would be much appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine Hotpoint Aquarius WMF740


Its normal for the door not to open with water in the machine this is a safety feature the door will not open immediately after the wash cycle completes their is a delay before it can be opened.

May 04, 2015 | Washing Machines

1 Answer

Hotpoint WMA62 washing machine door won't release


If the machine didnt finish the cycle due to the pump being clogged the door will remained locked also if the lock mechanism went bad, the machine will stay locked. Remove the top of the machine by taking the screws from the top back out. Once removed look down the right hand side and you'll see the lock mechanism, usually with a plastic tab you pull to manually release the lock.

Apr 24, 2012 | Hotpoint WMA64 Front Load Washer

1 Answer

Put clothes in washer HOTPOINT modelWML730 started


TURN MACHINE ON TO FINISH CYCLE THEN RE WASH WITH SOAP ETCH,DOOR WILL NOT OPEN MID CYCLE SAFTY LATCH,YOU CAN TURN PROGRAM TO FINAL SPIN TO EMPTY MACHINE AND FINISH PROGRAM THEN DOOR WILL OPEN

Jan 06, 2010 | Washing Machines

1 Answer

Door locked light flashing when door is closed


push on the door where the lock is... it may not be fully locked.

Feb 22, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Hotpoint washer/dryer aqaurius stopd mid cycle with message F-01


f01 is a motor short circuit. you will probably need a new one and maybe the circuit board that powers it if all the lights went out unless the fuse is gone.

Jan 28, 2009 | Hotpoint Aquarius WD63 Front Load...

2 Answers

Hotpoint BWD129 stuck in rinse phase


Problem was caused by a faulty water temperature sensor. The clue was that the owner reported increasingly hot washes, then the machine stuck at rinse. A test resistor replacing the sensor allowed the cycle to finish. A replacement sensor is on order.

Jan 10, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint bwd129 washer dryer won't dry my clothes.


my Hotpoint dry will not dry my clothes. It will run for hours and the clothes still haven't dry just felt hot.

Oct 05, 2008 | Washing Machines

1 Answer

WMA46 stopped woking power off mid cycle


hi there the problem you have sounds like the motor has shorted out causing the pcb to blow, sadly this is a costly repair and is usualy not worth repairing as you will need a new motor and pcb

murdozzz

Dec 09, 2007 | Hotpoint WMA46 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...