Question about Kenmore 22422 Top Load Washer

1 Answer

KENMORE 80 SERIES MODEL 110 22892 100, SPINS A LITTLE HELP!

Yesterday my machine went into the spin cycle and it wll start to spin very slow and you can hear a clicking sound like it is trying to open a relay or something! What do you think it is? How can I fix it? Thank you in advance.

Regards,

Siggy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your motor controller (or main CCU/timer) has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I started my washer and I worked just fine then it went into an extra rinse cycle and now it won't drain or spin the door switch works I can hear it click and then a low humming sound


Turn power off, then set the machine to a spin cycle, you may need to do this several times before the door will open. Hope this helps

Oct 08, 2015 | Washing Machines

1 Answer

RCA Whirlpool Model LSQ9665J will fill with water but does not agitate, spin, or drain on any cycle. Was working fine yesterday.


put the timer on spin,open the lid,with a screw driver push down on the lid switch,if the washer starts to spin and drain the lid switch is bad,also if nothing happens,lift up and push down on the switch if you don't hear a clicking sound the switch is bad,all it is is a safety so the washer won't run with the lid open.part number 3949247 and the lid switch is around 40 dollars,

Apr 02, 2011 | Whirlpool Washing Machines

1 Answer

Kenmore series 80, model 110-25842400, and serial number CR3353550 washing machine. I hadn't heard the machine work before the problem, and my wife said it was not working right (would fill with water and...


thabks for being through... i wish everyone was like you.. i get alot of Its not working? i hate that what does that mean... wish they were like you.. please check the harness on the motor while it is spinning.. i had that problem before... also it could be the speed selector switch.. sometimes it will get caught running 2 speeds at once and it will click like that...
checks these things and let me know if you need more assistance.... you sound like a tech.. wanna job? lol

Apr 12, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

My Haier waching machine has a slow spin cycle


I have the same problem with the same washer

Jan 26, 2010 | Haier Washing Machines

1 Answer

Our washer quit going into going cycle yesterday.


one click clockwise to see if will start if not start check carbons

Dec 20, 2009 | Washing Machines

1 Answer

110.28974891 Washing cycle worked great, During


Look for loose wiring connection at the motor capacitor (located beside the motor). Remove the connectors to the capacitor (one at a time), adjust connectors so they crimp the capacitor connection tabs tighter if necessary, and re-install. *Be very careful not to touch both capacitor connection tabs at the same time or you will get a good zap!*
If that doesn't help, you may have a defective motor.
Good luck!

Mar 01, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 series - clicking during slugish spinning cycle


try your unit on a outlet by it self ,,nothing can be on this line,,sounds like weak ampage,,this machine needs 15 amps line by it self...

Dec 27, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Electrical clicking, motor lurching sound during spin cycle


its not your unit it your electricity,,you have to many thing on 1 breaker..the unit is asking for power ,,a washing machine needs a breaker of 15 amps by its self..put the unit on a oulet by its self..with no other load

Dec 26, 2008 | Kenmore 15864/15862 Top Load Washer

1 Answer

F1045w spin prob


unfortunately that sounds like your timer is faulty.......in Ireland a timer is now costing approx €100-€150 euro so its not worth replacing outside of warranty

May 20, 2008 | Zanussi F1045W Front Load Washer

1 Answer

Washer won't start spin cycle


sounds like a lid assy issue, can you hear a "clicking" just before the lid is closed, try opening nad closing a few times listening for a distinct "click" if not the machine doesnt think the door is closed and for safety reasons wont spin and drain.

Mar 16, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...