Question about Fuji Pictrography 4500 Thermal Printer

2 Answers

Printer drivers fuji pictography 4500 mac 10.5.6

I recently got a mac pro OS 10.5.6.
I am unable to get our Fuji Film Pictography 4500 printer to work.
It does not recognize the drivers from the previous Tiger OS and I have
not been able to find a driver for this OS

Posted by on

  • larry_shank Feb 04, 2009

    I contacted Fuji tech support.They said that they do not support OS10.5.6 or Vista on this printer.They could not tell me if or when they would provide drivers for the Pictography 4500 printer.
    Thanks to Ginko for the help.I did not know that "Thanks for Trying"was a negative response,only meant it as a thanks for trying.


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fuji Master
  • 19,396 Answers

On the link below there are all drivers available for your printer, if you do not find MAc OS 10.5, then try 10.3x, if printer still does not work, then it is not compatible with this system.

See all 15 Download Drivers & Software for Pictrography 4500

Posted on Feb 03, 2009

  • Ginko
    Ginko Feb 03, 2009

    Well, that was free help, thanks for negative rating given, I wish
    users can give positive rating with same promptness, when answer is
    helpful.

    I must remember not to answer free questions like yours anymore in future, it does not reward.

    Goodbye.

  • Ginko
    Ginko Feb 04, 2009

    No problem, thanks for letting me know.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 115 Answers

Look here:
http://www.fixya.com/support/t1241659-any_solution_lack_fuji_drivers_new_macs

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Successfully installing Hyper-Utility2 on my Mac


Hi Paula,

Something that happens with Macs is the file permissions get messed up from installer programs. This problem usually can be corrected by running the disk tools program. It is usually located in your Applications folder in the Utilities sub folder.

You did not specify with version of OSX your Powerbook Pro is running. Make sure you have all the updates from Apple for your OS. You might also need to get an update from Fuji for the Hyper-Utility2 software. That can be found here: Fuji

Lastly, iPhoto is compatible for quick downloads from your camera

Jan 24, 2008 | Fuji FinePix S3 Pro Digital Camera

1 Answer

Installed mac osx 10.6.1 and my fuji wont print HELP!


Some manufacturers have not caught up and updated their drivers for snow leopard yet.  You gots ta be patient and wait a couple months or call the manufacturer and ask for a comparable driver that will run off snow leopard. Go back to the previous OS if that was working your printer.  Don't fix it if it ain't broke.

Oct 12, 2009 | Apple Mac OS X 10.4 Tiger for Mac

1 Answer

Driver for mac


from fuji......You can use these cameras on Mac OS X by updating your installed software with the updater which is uploaded in Software Download section.

heres a link
http://www.fujifilm.com/products/digital/download/index.html

you cannot use the usb driver download directly...it is not compatable w/ your camera...instead, download the software updater for your mac OS version

Apr 19, 2009 | Fuji FinePix S700 Digital Camera

1 Answer

Does the Fugi Pictrography 4500 wont print


Buy distilled water from the grocery store for $1.00 and then clean out the water tank and refill to the fill line. Change the water filter every 6 months (according to the manual). Clean out the water hoses by ramming soapy chopsticks through them and then forcing some water through them.

Mar 06, 2009 | Fuji Pictrography 4500 Thermal Printer

2 Answers

Driver for pictography 4500 for MCOSX 10.4.8 FOR G3


I haven't done it yet, but Fuji shows a driver on their US site for 10,4 and the Epson driver for 10.4 is also on their support site- I can provide links, but thye are easy to find just digging down thru the web sites

Dec 29, 2008 | Fuji Pictrography 4500 Thermal Printer

1 Answer

ANy solution to the lack of fuji drivers for new macs and OS?


4500N can't be recognize with an Intel Mac, because the Appletalk doesn't work. My solution to print: I've got a powerPC as an interface between Imac intel and fuji network adapter. The pictro driver is installed on both machines. On The Intel, The Appletalk is connected on Airport. On the PowerPc, The Appletalk is connected on Ethernet. Ethernet cable between powerPC and pictro network adapter. SCSI2 cable between PNA and the 4500. Of course, auto calibrating + eye-one color calibrating. WELL!! it works.

Nov 13, 2008 | Fuji Pictrography 4500 Thermal Printer

2 Answers

Fuji Pictrography 4500 Thermal Printer


i just bought a used 4500N printer and can't get it to be recognized by my mac or pc...any ideas how I get an ip address for it?  Thanks

May 10, 2008 | Fuji Pictrography 4500 Thermal Printer

1 Answer

11x14 paper jam


I had the same problem and the fix was adjusting the peeling time. Once this was adjusted I haven't had any jams. Fuji Tech Support talked me through it over the phone. Unfortunately I didn't write down the procedure and can't remember how we did it to share with you but I think I had to go into a maintenance or service mode to do it. You could probably look in the Service Manual to see how to adjust the peeling time. My Service Manual says refers to section 2.5.4.

I hope this helps,

CT

Oct 25, 2007 | Fuji Pictrography 4500 Thermal Printer

Not finding what you are looking for?
Fuji Pictrography 4500 Thermal Printer Logo

Related Topics:

663 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Raymond Ramirez
Raymond Ramirez

Level 2 Expert

331 Answers

Are you a Fuji Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...