Question about Logitech Webcam

1 Answer

Skype does not recognise my webcam

My skype test calls are successful and my logictec webcam test satisfactory. When I call a contact I can see and hear them. My contact can hear me but cannot see me. My screen says "Skype does not recognise your Webcam" Any suggestions?

Donal

Posted by on

  • jboxenbaum Feb 04, 2009

    My skype test calls are successful and my logictec webcam
    test satisfactory. When I call a contact I can see and hear them. My
    contact can hear me but cannot see me. My screen says "Skype does not
    recognise your Webcam" Any suggestions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Logitech Master
  • 1,102 Answers

YOU NEED TO SET UP CAM WITH SKYPE
IF STILL DOES'NT WORK THEN UNINSTALL SKYPE RESTAR AND REINSTALL THEN GO THROUGH CAM SET UP----

Go to TOOLS, then OPTIONS, and click on
Audio Settings
and set the Microphone and Speakers
to the computer Audio Card.
Then click on the Video Settings.
The camera if installed properly
will come up and show a picture.
Then on the bottom of the page click on Save.

PLEASE LET ME KNOW IF YOU STILL HAVE A PROB AND DON'T FORGET TO RATE

Posted on Feb 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an acer aspire 5610 and trying to make a skype to skype video call but there seems to be trouble with skype recognising the web cam. what do i do to successfully make a video call with this laptop?


Start a fresh, download the lastest skype software from www.skype.com then follow the below instructions once logged in.
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

Jan 16, 2011 | Computers & Internet

1 Answer

How to initiate the webcam on skype


please follow the below steps to make video calls on skype:

1. Open Skype. Double click the icon for Skype and log in.

2. Click "Tools." This is at the top of the screen in your Skype window.

3. Click "Options" under the "Tools" menu. This will open your Options menu.

4. Click "Video." This is a blue icon on the left.

5. Check the box next to "Enable Skype Video."

6. Test your webcam. Select your webcam from the list of devices and click "Test Webcam." You can adjust the settings here, too. Click "Save."

7. Start a video call. You can right click a contact name and select "Video." Or you can initiate a call and then click "Start video" once you are in the call.

Regards,
Shami

Dec 06, 2010 | Computers & Internet

1 Answer

I have a logitech veb cam,how i can have conection with someone who has skype?


Download the Skype program from here

http://www.filehippo.com/download_skype/

You create a username for yourself and invite your friends as contacts

Then when you have your webcam working on your computer you can configure it to Skype

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

Set your webcam mic as default ( if it has a built in mic

Plug in the webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Aug 21, 2010 | Logitech Quickcam Chat Webcam

1 Answer

My lifecam 1.4 won't allow image from my laptop to skype contacts but I can see the callers ??


Your webcam has no bearing on the ability to see other contacts - check your set up

Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 06, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

I have a logitech webcam it is a skype everthing works fine except i cannot hear the other person that i am on with my speakers are fine they can hear me but i cannot hear them what could be the problem?


If the problem is with just one contact its probably his mic setting at fault
Both check your set-up
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 02, 2010 | Logitech Quickcam Chat Webcam

1 Answer

Hi. I have downloaded Skype and can chat


Before you can use your webcam in any chat program you have to configure it to that program

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

working OK ?

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Apr 19, 2010 | Logitech QuickCam Deluxe for Notebooks

2 Answers

I installed Skype and my webcam has audio but no video


Hello...
All you need is to install the driver on windows.
Once installed correctly on windows, now you can configure it in skpye.
Tips to configure it in skype:
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com

ok
try this...



Jan 22, 2010 | Logitech Webcam

1 Answer

Im trying to video chat on skype using the minicam pro and it never actually works it just keeps saying starting video. I have installed the programs correctly uninstalled and reinstalled them and it still...


Try your webcam here, by hitting 'Allow' in the top window
http://www.testmycam.com/
Your webcam should broadcast in the left hand window.

If that is successful you know you can now configure it to Skype
Start Skype.
On the Tools menu, click 'Options'.
In the navigation pane of the Skype Options window, click 'Audio Settings'.
Select your mic as the default microphone.
In the navigation pane of the Skype Options window, click 'Video Settings'.
Select your webcam as the default.
Trim webcam image using 'Settings'
Click Save.
Test Cam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Oct 11, 2009 | GE MiniCam Pro HO98656 Webcam

1 Answer

What can I do to make my Logitech E3500 webcam work with skype


Somewhere in skype there are settings to choose your mic and speakers i'm just not sure exactly where probably under something like options

Jan 17, 2009 | Logitech Quickcam IM 961361-0403 Webcam

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18343 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...