Question about Cash Registers & POS Equipment

Open Question

Need to enable CR and LF on a PSC QS6500 scanner

I need to enable CR + LF on a PSC qs6500 scanner in order to work on a cash register. I did not find such a setting in the manual.
Is there a way to enable CR + LF on this scanner?

Posted by on

6 Suggested Answers

rdiodoro
  • 13 Answers

SOURCE: QS6500 With CAPs Lock on the scanner scans correctly

You must read the manual paper off.

Posted on Dec 17, 2008


jackcity
  • 33 Answers

SOURCE: Trying to use Casio PCR-T2100 cash register & Metrologic scanner.

Hi,
for the scanner, u need to program it to suit Casio Cash Register, eg: baud rate, parity , data bit & so on...other wise, the Cash Register cannot receive the signal from the scanner.
After program the scanner , please perform "flag clear" to the cash register.

Posted on Sep 13, 2009

  • 360 Answers

SOURCE: We need a Sharp XE-A202 manual for a cash

www.eposwizard.com.uk catch it

Posted on Jul 12, 2010

  • 1 Answer

SOURCE: Problems with very small Barcodes

Default settings set a global limit of 4.

You can set the global minimum code length by following the instructions in the user manual on page 24:

1) Start
2) Set Global Min Length
3) Scan the number on page 303: I.e. '0' followed by '3' to set length to 3
4) Set
5) End

Posted on Apr 23, 2011

prashant2012
  • 1127 Answers

SOURCE: I bought a second hand

Hi


Please download the mention below the link:--- and reply me if u have any problem to understand the cash register machine.

http://www.cashregisterguys.com/files/XEA202.pdf

Posted on May 06, 2011

Electroboy
  • 1516 Answers

SOURCE: scanner trouble

It sounds like you have lost the port settings. Most registers have to have the scanner port (socket) set in programming so the register knows which device you are using. I haven't worked with this model but if you need a manual, one of the users has a Royal 9155SC manual here:
http://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-9155sc_instruction_programming_manual.html

Posted on Jul 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you troubleshoot the scanner? Scanned item will beep but the bar code will not register into the cash register.


Probably a broken wire in the cable. As long as staff haven't re-programmed the scanner settings, the cable is most likely

Apr 13, 2016 | Cash Registers & POS Equipment

1 Answer

How to program date & time on Elite CR 101 cash register


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Jan 28, 2016 | Cash Registers & POS Equipment

1 Answer

How to program discount on Casio TE-2400 cash register


No need to program it. It is enabled by default. For a percentage discount, just type the percentage eg 10 then press %- button. For amount discount, type the dollar amount eg 2000 (no decimal) then press - button.

Dec 20, 2015 | Casio Parts Cash Register PC Desktop

2 Answers

I can't get the key to turn into the SM mode to clear the grand total history.. I would like to do this before I use the machine


Cash Register Help: SAM4s ER-650 Cash Register

cashregisterhelp.blogspot.com/2008/05/sam4s-er-650-cash-register.html
May 1, 2008 - I really like the SAM4s ER-650 Cash Register and ER-650R Cash Register. ... By the way the SAM4s ER-650 and ER-650R is the same as the Samsung ER-650 and ... I can't seem to figure out how to program it to track ticket/check #'s. .....also, neither the Reg Key or Mode Key will turn to SM mode. help?

Samsung Cash Registers ' ER650 Bar Code Scanner ...

www.maxperience.com > ... > Cash Registers
If not, you will need to go to the SM mode and configure either RS-232 port 1 or port 2... Press enter (cash key) through the rest of the options. ... I could not get the curserinto the plu numeric field once i entered the plu. .... There are manuals for the SAM4s ER-650 at http://www.cashregisterguys.com and if you are looking for ...

Samsung Cash Registers ' Samsung ER 650 Deleting PLUs ...


Dec 01, 2015 | Samsung SAM4s ER-650 Cash Register

2 Answers

Sigma cash regester manual


Hope this might work for you; please COMMENT

https://www.u-manual.com/download-manual-now-for-free-10/261398/cash-register-sigma-cr-2000.html#.VUZCUPCxgVE

May 03, 2015 | Cash Registers & POS Equipment

1 Answer

PCR-T500 shows the E037, Digit or amount limitation over when I press the CA/AMT TEND, where I receive the cash and try to give the change to my customer, it is work when I PRESS CR and CHK, but it show...


It happens when someone accidentally re-programs the cash button while trying to change prices because they are not following the pricing instructions correctly. Try programming the cash button as a zero price. Do it just like you are making a price change but enter zero into the cash button instead of an item.
----------------
For those who have asked about a programming manual for the PCRT500, one of the users has it here:
https://the-checkout-tech.com/manuals/cashregisters/Casio_PCR-T500_PCR-T520_Operation_and_programming_manual.html

Mar 28, 2015 | Cash Registers & POS Equipment

1 Answer

How to print electric journal for sams4 ER-265


On the 265 you will need to enable this feature first in the program flag setup. Once enabled, print journal by turning key to X and pressing 300 CASH. Then to clear the electronic journal, turn key to Z and press 399 CASH

Mar 15, 2014 | Sharp XE-A402 Electronic Cash Register

1 Answer

I have the Point of Sale/Cash Register Heavy Duty RJ-12 Key-Lock Cash Drawer w/Bill & Coin Trays that i ordered of off Amazon. It does not come with software or any instructions. I want to know if i can...


They are supposed to be self installing. If they are not ,its not your fault ,it means either they are faulty or your ports are. On my computer left click and select MANAGE THEN GO TO ports AND IDENTIFY YOUR PORT AS 1 OR11. Good luck

Oct 11, 2013 | The Perfect POS Point of Sale/Cash...

1 Answer

Scanner trouble


It sounds like you have lost the port settings. Most registers have to have the scanner port (socket) set in programming so the register knows which device you are using. I haven't worked with this model but if you need a manual, one of the users has a Royal 9155SC manual here:
http://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-9155sc_instruction_programming_manual.html

Jul 10, 2013 | Sharp Royal Alpha 9155SC Cash Register

Not finding what you are looking for?
Cash Registers & POS Equipment Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cash Registers & POS Equipment Experts

Electroboy
Electroboy

Level 3 Expert

1516 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Cash Register and POS Equipment Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...